Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Hurst
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Regional Forums > USA - Mid-Atlantic

Reply
 
Thread Tools
Old 07-20-2015, 11:15 PM   #1
rdblan2

 
Drives: 2SS RS
Join Date: Mar 2010
Location: MD
Posts: 1,233
MD, VA, DE, whoever else leaving for the fest on Wednesday morning check in here pls

I read through some of the other threads, and there's a mix of folks leaving Wednesday and Thursday. I'd like to leave Wednesday morning and I hope a few of you will come with me.

Likely leaving outside Baltimore in the early morning, going out I70 to 340 and cutting across Harpers Ferry WV and picking up I81S in Winchester VA. I go this way often and it's way quicker than going around 495 to 66. I'll either pick up 64 and run across WV or just stay on 81 all the way through VA. That's a nice drive and my preferred route. Easy drive with rest stops all along the way.

Anyone wanna go with me? I was hoping to go with Ernie and the VA crew but looks like they're leaving on Thursday.

If there's more interest, we can nail down meeting times and such if anyone wants to meet up with me.
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
rdblan2 is offline   Reply With Quote
Old 07-21-2015, 08:48 AM   #2
SilverMike
 
SilverMike's Avatar
 
Drives: Silver 2011 Camaro
Join Date: Jun 2014
Location: Maryland
Posts: 38
That route sounds excellent for me. I practically live off of I-70 so it wouldn't be hard to meet up. I'm hoping a friend of mine can join us; he's in northern VA, so he might meet us closer to harpers ferry.
SilverMike is offline   Reply With Quote
Old 07-21-2015, 10:08 AM   #3
rdblan2

 
Drives: 2SS RS
Join Date: Mar 2010
Location: MD
Posts: 1,233
Awesome, at least I'm not driving alone! Probably be in Frederick around 0800-ish. Anyone else?
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).

Last edited by rdblan2; 07-21-2015 at 11:28 PM.
rdblan2 is offline   Reply With Quote
Old 07-21-2015, 10:32 AM   #4
Casperadub70

 
Casperadub70's Avatar
 
Drives: 2014 1LE Camaro, 95 Z28 Camaro
Join Date: Jun 2011
Location: Pasadena Maryland
Posts: 908
How long is the drive?
__________________
2014 1LE 2SS Camaro Recaro seats, Custom Cam, Kooks LT headers, CAI intake, Z/28 Spoiler, Z/28 Belly Pan, Z/28 Brake Air Ducts, Stainless Steel breaklines, BMR Toe Rods and Trailing Arms resulting in 482.49 RWHP
Casperadub70 is offline   Reply With Quote
Old 07-21-2015, 10:43 AM   #5
rdblan2

 
Drives: 2SS RS
Join Date: Mar 2010
Location: MD
Posts: 1,233
Going all the way down 81 is right at 11 hours from Baltimore. If it's just those of us from right around b-more going though and none of the VA crew want to meet up with us, we could do 70 to 68 to Morgantown WV then down 79 through WV to Charleston, WV then hitting I64 toward Lexington, KY. That saves us about an hour.

I'm really fine with either way though. The drive down 81 all the way through VA is a nice easy drive with plenty of places to stop along the way whenever you want.
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
rdblan2 is offline   Reply With Quote
Old 07-21-2015, 11:01 AM   #6
Casperadub70

 
Casperadub70's Avatar
 
Drives: 2014 1LE Camaro, 95 Z28 Camaro
Join Date: Jun 2011
Location: Pasadena Maryland
Posts: 908
Cool. I know a few people in Richmond are leaving that day to. Not sure where they could meet up with us at
__________________
2014 1LE 2SS Camaro Recaro seats, Custom Cam, Kooks LT headers, CAI intake, Z/28 Spoiler, Z/28 Belly Pan, Z/28 Brake Air Ducts, Stainless Steel breaklines, BMR Toe Rods and Trailing Arms resulting in 482.49 RWHP
Casperadub70 is offline   Reply With Quote
Old 07-21-2015, 11:11 AM   #7
rdblan2

 
Drives: 2SS RS
Join Date: Mar 2010
Location: MD
Posts: 1,233
Quote:
Originally Posted by Casperadub70 View Post
Cool. I know a few people in Richmond are leaving that day to. Not sure where they could meet up with us at
They could come straight across I64 and meet up with us on 81S around Staunton. If they'll post up here, we can try to nail down a time and location to meet.
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
rdblan2 is offline   Reply With Quote
Old 07-21-2015, 11:17 AM   #8
pilldoctor
 
pilldoctor's Avatar
 
Drives: 2013 Summit White 2LT RS
Join Date: Oct 2013
Location: White Marsh Maryland
Posts: 47
Sounds good to me. At work now but will take a look at the route later tonight. Will be good to all travel together.
pilldoctor is offline   Reply With Quote
Old 07-21-2015, 02:03 PM   #9
Jus1dab


 
Jus1dab's Avatar
 
Drives: 2010 Camaro 2SS/RS Black & Silver
Join Date: Aug 2010
Location: Richmond, VA
Posts: 4,956
We are leaving on wed. now too. (My cousin and I) We are going down 81 and staying over night in Pigeon forge Tenn. Maybe we can hook up with you guy in Staunton VA Weds morning.
__________________
Jus1dab is online now   Reply With Quote
Old 07-21-2015, 10:55 PM   #10
rdblan2

 
Drives: 2SS RS
Join Date: Mar 2010
Location: MD
Posts: 1,233
Quote:
Originally Posted by Jus1dab View Post
We are leaving on wed. now too. (My cousin and I) We are going down 81 and staying over night in Pigeon forge Tenn. Maybe we can hook up with you guy in Staunton VA Weds morning.
Hey man! Be great to see you guys again. Staunton is a little over 3 hours from B-more. If we leave at 0700L, we should be in Staunton around 10am.

I'm gonna give this thread another day or so and then post a route with times and such.
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
rdblan2 is offline   Reply With Quote
Old 07-22-2015, 08:53 PM   #11
RxDoc08
Jason
 
RxDoc08's Avatar
 
Drives: 2011 2SS/RS M6
Join Date: Apr 2011
Location: Richmond, Va
Posts: 256
We're leaving Wednesday morning relatively early. I'm trailering mine down though....impossible to fit 4 adults with drag radials and luggage in a Camaro.
__________________
Kook's headers w/ high flow cats, Borla S-Type, VMAX ported throttle body, CAI Inc. intake, Jannetty race scoop, Roto-Fab washer bottle relocation, Jannetty rough idle blower cam, DSS 9" w/ 3.70 gears, RPM Level 6 trans, Street Slayer Twin Carbon clutch, MGW Shifter, Pfadt trailing arms.
RxDoc08 is offline   Reply With Quote
Old 07-23-2015, 07:39 AM   #12
rdblan2

 
Drives: 2SS RS
Join Date: Mar 2010
Location: MD
Posts: 1,233
Quote:
Originally Posted by RxDoc08 View Post
We're leaving Wednesday morning relatively early. I'm trailering mine down though....impossible to fit 4 adults with drag radials and luggage in a Camaro.
We'd all like to see you try though!
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
rdblan2 is offline   Reply With Quote
Old 07-23-2015, 07:18 PM   #13
RxDoc08
Jason
 
RxDoc08's Avatar
 
Drives: 2011 2SS/RS M6
Join Date: Apr 2011
Location: Richmond, Va
Posts: 256
Quote:
Originally Posted by rdblan2 View Post
We'd all like to see you try though!
If my wife and her sister weren't completely against it, I'd sure as heck try. It was hard enough though with just me and my brother-in-law with all of the essentials...and copious amounts of alcohol of course.
__________________
Kook's headers w/ high flow cats, Borla S-Type, VMAX ported throttle body, CAI Inc. intake, Jannetty race scoop, Roto-Fab washer bottle relocation, Jannetty rough idle blower cam, DSS 9" w/ 3.70 gears, RPM Level 6 trans, Street Slayer Twin Carbon clutch, MGW Shifter, Pfadt trailing arms.
RxDoc08 is offline   Reply With Quote
Old 07-24-2015, 04:04 PM   #14
mobilin
 
Drives: 2010 2LT and 2013 LS Camaro
Join Date: Apr 2009
Location: Northern Virginia
Posts: 167
Send a message via AIM to mobilin Send a message via MSN to mobilin Send a message via Yahoo to mobilin
What time do you think you'll make it down? I see if you are in Fredrick MD by 0800 you are probably looking at a 6-8 PM arrival on Wed? I need to look and see if the guys/gals have finalized the Wed night meet and greet. I was planning on leaving Front Royal, VA right off I-66 at 0500 but willing to wait until 0600. I posted what I believe should be a route and time that will allow for others to meet up and wait time at each stop. I know you folks higher up this might be to early? If we shorten the layover at the stops we might still make it in pretty early. I didn't want to be to late in checking in. I was going to try and go to the Corvette Museum for a quick visit on Wed evening but I haven't looked at the time for that yet (when they close). Just my thoughts...

http://www.camaro5.com/forums/showth...57#post8550757
__________________
----------------------------------
Torch Red Stingray 2LT Z51
1/12/15 ordered
1/23/2015 Status 3300 TPW 2/9/2015
2/12/2015 VIN
3/16/2015 Delivered (NCM) (NO ECAR)
Black LS Purchased 07/20/13 (SYFY 2)
Red 2LT Delivered 06/24/09 20 days (SYFY)
mobilin is offline   Reply With Quote
Old 07-26-2015, 08:41 AM   #15
pilldoctor
 
pilldoctor's Avatar
 
Drives: 2013 Summit White 2LT RS
Join Date: Oct 2013
Location: White Marsh Maryland
Posts: 47
Is there anyone traveling to the feat that is going to be at hunt valley cc august 1st. Would be nice to meet some people face to face before heading out.
pilldoctor is offline   Reply With Quote
Old 07-26-2015, 10:48 AM   #16
z28-conv
 
z28-conv's Avatar
 
Drives: '97 z-28 conv. 2013 BRM ZL1 conv.
Join Date: May 2012
Location: Maryland
Posts: 667
I may be there in Hunt Vally on the 1st. However I am not leaving for the fest until Thurs. the 6th. in the AM
z28-conv is offline   Reply With Quote
Old Yesterday, 08:09 PM   #17
Rafsanjani
What now Bitches?
 
Rafsanjani's Avatar
 
Drives: 2013 SW ZL1
Join Date: Aug 2009
Location: Leesburg, VA
Posts: 592
My first option fell through. I'd definitely consider leaving Wednesday morning. Count me in
__________________
2013 SW ZL1
Rafsanjani is offline   Reply With Quote
Old Yesterday, 10:25 PM   #18
rdblan2

 
Drives: 2SS RS
Join Date: Mar 2010
Location: MD
Posts: 1,233
Sorry everyone! I've not abandoned this thread. Had some family in the hospital over the weekend. I'll update this ASAP!
__________________
Livernois 2C cam and tune, LS3 conversion, Roto-Fab intake, Kooks headers, DSS driveshaft and axles, BMR suspension parts, VMax ported throttle body, Whipple blower. (623hp).
rdblan2 is offline   Reply With Quote
Old Today, 12:50 PM   #19
Jus1dab


 
Jus1dab's Avatar
 
Drives: 2010 Camaro 2SS/RS Black & Silver
Join Date: Aug 2010
Location: Richmond, VA
Posts: 4,956
Quote:
Originally Posted by rdblan2 View Post
Sorry everyone! I've not abandoned this thread. Had some family in the hospital over the weekend. I'll update this ASAP!
Hope everything is well with your family member.
__________________
Jus1dab is online now   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:33 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2015, vBulletin Solutions, Inc.