Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Gen5DIY
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Specific Models / Packages > Camaro 1LE Forum

Camaro 1LE Forum Camaro 1LE Package releated discussions

Reply
 
Thread Tools
Old 05-10-2013, 10:51 AM   #1
WongBob
Dig Race?
 
WongBob's Avatar
 
Drives: '13 AGM 2SS/RS 1LE
Join Date: Dec 2009
Location: Minden, LA
Posts: 318
Loving the car so far, but having a few issues...

I have put 1050 miles on my 1LE in the last ~5 weeks. In that time I have installed ZL1 rocker panels, and painted the turn signals/markers/tail bezels. At around the 800 mile mark everything was perfect. Not a single issue. 2 weeks ago on a quick wot 1-2 it had a grind. The next night it did it again twice. Didn't drive it for a week and took it out this past weekend. Same thing... about 25% of the quick, high rpm shifts would be a grind.

So after some reading on here I have ordered a tick speed bleeder, Tick clutch line, redline trans fluid, motul clutch fluid, a gto reservoir kit. I am looking at the modified master cylinders but I want to see how these changes affect it first. I never had any grinding issues with my 2010 SS over 1 year and 7500 miles. I am trying to get this issue resolved before I start modding it. ARH catless short system and cold air inductions is in route so I am hoping to get it lined out pretty quick.

The other issue is that my HUD. It has only happened a few times early this week, but it would come on and fade out. Then stay off for a few minutes and fade in and then back out. No clue what the deal is there. Hasn't done it again so the dealership couldn't diagnose it...

Other than these few little issues it has been flawless. It honestly is a completely different breed of Camaro when comparing it to the 2010 I had.
__________________
TBSS Cam Only Record Holder 1.467 60', 11.568 @ 116.86
WongBob is offline   Reply With Quote
Old 05-10-2013, 11:58 AM   #2
Southern Comfort
No Tags/Habitual Violator
 
Southern Comfort's Avatar
 
Drives: 2013 SIM 1LE & 2010 ABM/LT/RS
Join Date: Sep 2011
Location: North Georgia
Posts: 2,153
Grinding seems to be a little too common. Are you allowing the trans to warm up and it still grinds? I'd be hitting up warranty service.
Here's a thread about it.
http://www.camaro5.com/forums/showthread.php?t=285842
__________________

'10 2SSVortech(sold) *'10 2LT ABM (sweet) *'13 1LE 2SS (sold) *'13 1LE 44? of 44*
Check out the Atlanta area A.C.E.5 events page
Got quality 5th Gen Camaro performance parts for sale? Shoot me a PM with what ya got and what ya want.
Southern Comfort is offline   Reply With Quote
Old 05-10-2013, 12:53 PM   #3
WongBob
Dig Race?
 
WongBob's Avatar
 
Drives: '13 AGM 2SS/RS 1LE
Join Date: Dec 2009
Location: Minden, LA
Posts: 318
I have read a lot of threads on the issue. I have only had the issue with everything at operating temps. They will be fixing the issue if it gets to that point. We have already talked about it. Not too big of a deal. I just figured I would post some of the things my car is doing.
__________________
TBSS Cam Only Record Holder 1.467 60', 11.568 @ 116.86
WongBob is offline   Reply With Quote
Old 05-10-2013, 01:39 PM   #4
Chevrolet Customer Svc


 
Chevrolet Customer Svc's Avatar
 
Drives: GM Vehicles
Join Date: Jun 2010
Location: Michigan
Posts: 8,824
Quote:
Originally Posted by WongBob View Post
I have read a lot of threads on the issue. I have only had the issue with everything at operating temps. They will be fixing the issue if it gets to that point. We have already talked about it. Not too big of a deal. I just figured I would post some of the things my car is doing.
Greetings WongBob,

Sorry to hear about the grinding as it sounds like you may need to make a trip to your local GM dealer. I'd be happy to schedule that visit for you. Feel free to send me a PM if I can assist.

William R.
Chevrolet Customer Care
Chevrolet Customer Svc is offline   Reply With Quote
Old 05-10-2013, 06:17 PM   #5
WongBob
Dig Race?
 
WongBob's Avatar
 
Drives: '13 AGM 2SS/RS 1LE
Join Date: Dec 2009
Location: Minden, LA
Posts: 318
My wife works at the dealership. It is sitting there now. They couldn't replicate the problems. We will find out soon enough if it is a synchronizer issue or otherwise.
__________________
TBSS Cam Only Record Holder 1.467 60', 11.568 @ 116.86
WongBob is offline   Reply With Quote
Old 05-10-2013, 06:33 PM   #6
Lillarry
 
Lillarry's Avatar
 
Drives: 2013 camaro 2ss/rs 1LE
Join Date: Jun 2012
Location: Waskom
Posts: 60
Mine was a little notchy at first, hard to shift from 2nd to 3rd, during more aggressive driving. After 1500 to 2k miles it started shifting smooth as glass. 5k miles on it now and still no issues with shifting. I just figured it needed to break in and loosen up a bit. It was also a little tough to get in gear on cold startups, but that's better now too. Hopefully it just needs to get broken in a little more and it's not an issue. We need to get these things together one day and cruise these things down some twisty back roads!
Lillarry is offline   Reply With Quote
Old 05-10-2013, 08:40 PM   #7
WongBob
Dig Race?
 
WongBob's Avatar
 
Drives: '13 AGM 2SS/RS 1LE
Join Date: Dec 2009
Location: Minden, LA
Posts: 318
I don't drive it enough to break it in slowly. Lol
__________________
TBSS Cam Only Record Holder 1.467 60', 11.568 @ 116.86
WongBob is offline   Reply With Quote
Old 05-11-2013, 03:47 PM   #8
Chevrolet Customer Svc


 
Chevrolet Customer Svc's Avatar
 
Drives: GM Vehicles
Join Date: Jun 2010
Location: Michigan
Posts: 8,824
Quote:
Originally Posted by WongBob View Post
My wife works at the dealership. It is sitting there now. They couldn't replicate the problems. We will find out soon enough if it is a synchronizer issue or otherwise.
Oh I see,

Well please provide updates when possible. I'd love to hear the status of your concern.

Thanks so much,

William R.
Chevrolet Customer Care
Chevrolet Customer Svc is offline   Reply With Quote
Old 05-11-2013, 08:23 PM   #9
WongBob
Dig Race?
 
WongBob's Avatar
 
Drives: '13 AGM 2SS/RS 1LE
Join Date: Dec 2009
Location: Minden, LA
Posts: 318
I'm not too concerned. I think if it was a synchro is would do it at part throttle every now and then as well. Should be able to get it worked out. I will have everything swapped in the next few days and will post up results.
__________________
TBSS Cam Only Record Holder 1.467 60', 11.568 @ 116.86
WongBob is offline   Reply With Quote
Old 05-11-2013, 08:30 PM   #10
HighMtnSS
 
HighMtnSS's Avatar
 
Drives: '13 AGM 2SS/RS 1LE, 1 of 139
Join Date: Apr 2011
Location: Broomfield, Colorado
Posts: 142
My 1LE shifts smoothly in general. But, mine is notchy/somewhat difficult to get into reverse..?
HighMtnSS is offline   Reply With Quote
Old 05-13-2013, 08:18 AM   #11
WHAMMO

 
WHAMMO's Avatar
 
Drives: LS2 Fbody
Join Date: Apr 2012
Location: Canada
Posts: 1,060
Quote:
Originally Posted by HighMtnSS View Post
My 1LE shifts smoothly in general. But, mine is notchy/somewhat difficult to get into reverse..?
Sounds a lot like my T56 ...stock MC sucks. Im pretty sure it still does.
__________________
4th Gen SS/LS2 SB/LS3 heads/N20
WHAMMO is offline   Reply With Quote
Old 05-14-2013, 02:28 AM   #12
CRTZL1
Banned
 
Drives: 2013 CRT ZL1
Join Date: Sep 2012
Location: N.Y.
Posts: 1,547
I have 900 and change miles on mine, broke in hard and not one single issue with the tran or shifting! Smooth as butter... knock knock on wood.
Just telling you this as a reference, not as a gloat!!
Good luck with the issue man!
CRTZL1 is offline   Reply With Quote
Old 05-23-2013, 03:37 PM   #13
RonnieG
 
RonnieG's Avatar
 
Drives: 2013 AGM 1LE/2SS/RS
Join Date: Mar 2013
Location: Lakeland, Florida
Posts: 290
WongBob said:
Quote:
"The other issue is that my HUD. It has only happened a few times early this week, but it would come on and fade out. Then stay off for a few minutes and fade in and then back out. No clue what the deal is there. Hasn't done it again so the dealership couldn't diagnose it..."
I've 10,600 miles on my car and only once did I experience that same issue with the HUD.. I immediately googled and found that people have had it happen to them with glare. It seemed about right since that one time it happened there was massive glare, however it never happened before and I live in florida. I keep it on all the time and it's been working great since.

I remember being pissed that week because earlier Hill Start assist made me stall at the Hard Rock Casino garage and my clutch got stuck (which when googled, found out that others had the same problem).. it wouldn't fully come up after depressing it and eventually stuck my foot under and forced it up and it's been fine ever since.

That was about the only time I've ever been unhappy with my Camaro.. those problems made me sick to my stomach.. but that was months ago and no problems ever since! Love my Camaro.
RonnieG is offline   Reply With Quote
Old 05-26-2013, 11:19 AM   #14
Firefighter


 
Firefighter's Avatar
 
Drives: Black '13 2SS/RS/1LE w/NPP/NAV
Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 2,700
I felt like the trans shifted Okay at first. When I changed all the oils at 1500 miles it made a HUGE difference. I went with Valvoline across the board. So far the clutch, the brakes, the engine, trans and diff are all some form of Valvoline Synthetic. You could do the same with Royal Purple, Lucas, or Castrol, Mobil One what ever.

Check post #78 on my thread... http://www.camaro5.com/forums/showthread.php?t=285054
Firefighter is offline   Reply With Quote
Old 05-26-2013, 08:52 PM   #15
WongBob
Dig Race?
 
WongBob's Avatar
 
Drives: '13 AGM 2SS/RS 1LE
Join Date: Dec 2009
Location: Minden, LA
Posts: 318
I don't know if I have driven the car since I started this thread. Maybe once. I have everything to change the fluids and isolate the clutch fluid. Just waiting on the exhaust to show up at this point. I am going to do everything at once. Probably wont make any track passes with the car bone stock like I had previously planned. Also never made it to a dyno for a baseline pull. I went to a dyno event about a month ago with it to try to get numbers but they were only getting one car on per hour to two hours.

Ill post updates as I go. As I said before I don't think this transmission will be much of an issue. I could be wrong though.
__________________
TBSS Cam Only Record Holder 1.467 60', 11.568 @ 116.86
WongBob is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.