Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 05-15-2013, 07:17 PM   #1
Qui3tStorm
 
Qui3tStorm's Avatar
 
Drives: 11 Camaro 2SS
Join Date: Oct 2011
Location: NY
Posts: 181
Seeking to get Blown

Car is '11 2SS M6
Car currently has Solo HFC & Mach 3" catback and CAI intake. TSP 2" LTs are on the way. Hotchkis Springs wrap up "performance" mods.

I'd like to achieve at least 585/590+/- WHP with a solid torque curve. But my baseline goal is to put down AT LEAST 550RWHP. I'm not concerned with going centri route and dumping my intake etc, I just want my goal numbers with the' most reliable platform out. Also as it may sound lame, I do want that SC whine. I don't wanna put badges all over my car or HP claims, I just want that loud whistle/whine letting bystanders know it's very not stock. I've found great deals on ESC and TVS kits, but with the new TVS kits and a lack of the cog gears I'm worried I will not be able to achieve my blower sound goal And Centri aside from the YSi? Are typically quiet or am I wrong? Thanks for any help you can provide on which system would best suite my wants!

Last edited by Qui3tStorm; 05-16-2013 at 07:13 AM.
Qui3tStorm is offline   Reply With Quote
Old 05-15-2013, 07:35 PM   #2
meshamey
Meshamey
 
meshamey's Avatar
 
Drives: 2011 Camaro 2SS / 2014 Camaro ZL1
Join Date: Apr 2013
Location: Panama City, Florida
Posts: 303
meshamey is offline   Reply With Quote
Old 05-15-2013, 07:35 PM   #3
bw26ss
Banned
 
Drives: ss camaro
Join Date: Jul 2012
Location: usa
Posts: 876
aren't we all, ha ha
bw26ss is offline   Reply With Quote
Old 05-15-2013, 07:36 PM   #4
meshamey
Meshamey
 
meshamey's Avatar
 
Drives: 2011 Camaro 2SS / 2014 Camaro ZL1
Join Date: Apr 2013
Location: Panama City, Florida
Posts: 303
Quote:
Originally Posted by bw26ss View Post
aren't we all, ha ha
meshamey is offline   Reply With Quote
Old 05-15-2013, 07:38 PM   #5
Unreal


 
Drives: 2006 Z06
Join Date: Oct 2010
Location: Gilbert, AZ
Posts: 5,131
Depends on the centri. Straight cut ones like Ysi and D1SC without helical option whine.

Just do turbos. Make 700+ and a crazy torque curve.
__________________
Nick
Corvette Z06 -1200ish rwhp
Unreal is offline   Reply With Quote
Old 05-15-2013, 07:39 PM   #6
Mchlgrrsn
Stroked and blown
 
Mchlgrrsn's Avatar
 
Drives: 2010 LS3 2SS
Join Date: Dec 2012
Location: Bridgewater, NJ
Posts: 1,458
Maggie is a fine blower. It is pretty quiet. Cog drive will DEFIANTLY take care of that. I would think you would have no problem achieving your power goal.
__________________
LME 416 LS3 shortblock/Callies Compstar 4340 4"crank/Callies 6.125 H beams rods/Wiesco 4.07 forged pistons/Cam Motion custom LS1/LME ported heads /maggie TVS2300/I West 8rib 10%OD /3.2 pulley/OD cog drive/JRE tensioner/ID850 /ADM dual fuel/Kooks LT 1 7/8/magna flow2.5 /cat delete/Roto Fab CAI /MGW short throw /SPEC super twin clutch/G Force built trans,carbon syncro rear shaft upgrade /DSS 9"single CF DS /Strange 3.70/31 spline trutrac/MT DR's/earls oil cooler /tuned KHC
Mchlgrrsn is offline   Reply With Quote
Old 05-15-2013, 07:51 PM   #7
Iam Broke
PHAT B33
 
Iam Broke's Avatar
 
Drives: 2012 TF3 Camaro 2SS/RS M6
Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,441
SLP new TVS2300 def has a whine. Vids have been posted of flybys.
__________________
Another 1 of 371 '12 T3 LS3 M6's built.
Iam Broke is offline   Reply With Quote
Old 05-15-2013, 07:55 PM   #8
bct10985

 
Drives: 2010 2SS LS3, 2013 duramax
Join Date: Nov 2012
Location: Dover, De
Posts: 1,094
My ecs novi 1500 is definitely a lot quieter than the s trim vortech i had on my old trans am.
__________________
ECS Novi 1500 supercharger, FSP cam, Tsp 2" longtubes, Squash dual pumps, Id850s, Aem meth, Jakes stageIII 4L80e, FTI 3600, ZL1 3.73 diff, BMR suspension, 17" weld rts 4.5" M&H skinnies front, carlyle racing 15" conversion mt 325 et street R. 650rwhp mustang dyno. 10.93@125 1.6 60'- m6 stock cam.
bct10985 is offline   Reply With Quote
Old 05-15-2013, 07:58 PM   #9
Qui3tStorm
 
Qui3tStorm's Avatar
 
Drives: 11 Camaro 2SS
Join Date: Oct 2011
Location: NY
Posts: 181
Quote:
Originally Posted by Unreal View Post
Depends on the centri. Straight cut ones like Ysi and D1SC without helical option whine.

Just do turbos. Make 700+ and a crazy torque curve.

Wouldn't the Ysi be a bit overkill for my end goals? And I'm no interested in turbo route at all from previous experiences.

Quote:
Originally Posted by Mchlgrrsn View Post
Maggie is a fine blower. It is pretty quiet. Cog drive will DEFIANTLY take care of that. I would think you would have no problem achieving your power goal.
My understanding is that the new TVS blowers changed in design and no longer can run the cog drive, is this true for only the SLP? Is the Maggie unchanged still?
Qui3tStorm is offline   Reply With Quote
Old 05-15-2013, 08:06 PM   #10
Mr. Nasty
Emerald Coast Camaros
 
Mr. Nasty's Avatar
 
Drives: 2010 RS/SS Rally Yellow & 68 SS
Join Date: Dec 2012
Location: Woodville,FL.
Posts: 1,713
Go with the whipple 2.9 you can get your HP and it has a nice loud whine
__________________
Best @ 586/525 =10.41 @ 133
AS OF 12/13/14>633 RWHP =10.22@135
AS OF 1/31/15 @ 633 RWHP=10.16@135
AS OF 1/29/16 @ 633 RWHP=10.10@136
TOPED 700 PASSES AFTER F.I. AND STILL ON THE ORIGIANAL STOCK AXLE & DIFF
Mr. Nasty is offline   Reply With Quote
Old 05-15-2013, 11:49 PM   #11
Mchlgrrsn
Stroked and blown
 
Mchlgrrsn's Avatar
 
Drives: 2010 LS3 2SS
Join Date: Dec 2012
Location: Bridgewater, NJ
Posts: 1,458
Quote:
Originally Posted by Qui3tStorm View Post
Wouldn't the Ysi be a bit overkill for my end goals? And I'm no interested in turbo route at all from previous experiences.



My understanding is that the new TVS blowers changed in design and no longer can run the cog drive, is this true for only the SLP? Is the Maggie unchanged still?

Maggie just needs different fuel rails to put a cog drive on.
__________________
LME 416 LS3 shortblock/Callies Compstar 4340 4"crank/Callies 6.125 H beams rods/Wiesco 4.07 forged pistons/Cam Motion custom LS1/LME ported heads /maggie TVS2300/I West 8rib 10%OD /3.2 pulley/OD cog drive/JRE tensioner/ID850 /ADM dual fuel/Kooks LT 1 7/8/magna flow2.5 /cat delete/Roto Fab CAI /MGW short throw /SPEC super twin clutch/G Force built trans,carbon syncro rear shaft upgrade /DSS 9"single CF DS /Strange 3.70/31 spline trutrac/MT DR's/earls oil cooler /tuned KHC
Mchlgrrsn is offline   Reply With Quote
Old 05-16-2013, 01:21 AM   #12
Kronix
NJ/SoCal HT5 COTW 3/25/12
 
Kronix's Avatar
 
Drives: 2015 Z06/14 C7/08 Z06/07 Tahoe Z71
Join Date: Nov 2011
Location: South Jersey & SoCal
Posts: 1,965
Quote:
Originally Posted by Mchlgrrsn View Post
Maggie just needs different fuel rails to put a cog drive on.
Maggie just needs the passenger side rail shaved about 3mm at the rear where the Cog belt is.

I have the SLP Maggie TVS2300 with OD Cog Drive pulleys, added the Innovators West 8 rib pulley set to handle 700+HP.....You'll get plenty of whine with that set up, my car can be heard from 2 blocks away easy I've been told.
__________________

Built by Late Model Racecraft
Fastest C7 in Tri-State 10.13 @ 134mph
7/26/14 Corvette Challenge Raceway Park, E-Town, NJ
Kronix is offline   Reply With Quote
Old 05-16-2013, 07:03 AM   #13
Birm
 
Birm's Avatar
 
Drives: Florida Speed & Power
Join Date: Jan 2011
Location: Pinellas Park, FL
Posts: 3,188
Quote:
Originally Posted by Qui3tStorm View Post
Car is '11 2SS M6
Car currently has Solo HFC & Mach 3" catback and CAI intake. TSP 2" LTs are on the way. Hotchkis Springs wrap up "performance" mods.

I'd like to achieve at least 585/590+/- WHP with a solid torque curve. But my baseline goal is to put down AT LEAST 550RWHP. I'm not concerned with going centri route and dumping my intake etc, I just want my goal numbers with the' most reliable platform out. Also as it may sound lame, I do want that SC whine. I don't wanna put badges all over my car or HP claims, I just want that loud whistle/whine letting bystanders know it's very not stock. I've found great deals on ESC and TVS 1500 kits, but with the new TVS kits and a lack of the cog gears I'm worried I will not be able to achieve my blower sound goal And Centri aside from the YSi? Are typically quiet or am I wrong? Thanks for any help you can provide on which system would best suite my wants!
ECS Supercharger FTMFW! Everything you need is included, and the whine is absolutely intoxicating.

Here is my car:


Let me know if you are interested, we can hook you up! Give us a call or shoot myself or Matt@FSP a pm!

Last edited by Birm; 05-16-2013 at 09:08 AM.
Birm is offline   Reply With Quote
Old 05-16-2013, 07:12 AM   #14
45thCamaro


 
45thCamaro's Avatar
 
Drives: 2012 Camaro 45th Anniversary RS
Join Date: Nov 2012
Location: New York
Posts: 2,315
Story of my life.
45thCamaro is online now   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:14 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.