Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 05-21-2013, 01:55 PM   #1
CamaroDIYking
 
Drives: 2010 Camaro 2SS/RS
Join Date: Feb 2013
Location: Georgia
Posts: 229
noweeds

if i have stock headers and a dynomax 3 inch catback exhaust, can i fit the 2.5 " noweeds exhaust diverters? or do i need the 3 inch ones?
__________________
2010 2SS/RS- every option possible in 2010

Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights.
Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps.
Exterior lights- tinted tail lights and sidemarker lights.
Wheels- powdercoated stock RS 20' wheels black
Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete.
Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros.
CamaroDIYking is offline   Reply With Quote
Old 05-21-2013, 02:53 PM   #2
CamaroSkooter
Retarded One-Legged Owl
 
CamaroSkooter's Avatar
 
Drives: 2010 Black Camaro 2SS
Join Date: Oct 2008
Location: San Antonio, TX
Posts: 9,640
How is the 3" catback attached to the factory 2.5" catalytic converters?

Because the dynomax has a slightly different geometry than the ARH exhaust system, you may be better off getting this and this instead of trying to purchase their Camaro specific kits.

Then you can put the cut-outs wherever you want in the exhaust system and line up the turn downs however you like.

Note: You'll need to purchase two turn downs.
__________________

My VIN = 2G1FK1EJ9A9105017
Build Date: 04-23-2009 according to:
http://www.compnine.com/vid.php
CamaroSkooter is offline   Reply With Quote
Old 05-21-2013, 03:19 PM   #3
CamaroDIYking
 
Drives: 2010 Camaro 2SS/RS
Join Date: Feb 2013
Location: Georgia
Posts: 229
I'm not sure if I get what you mean...I becuse said anything about ARH...lol
__________________
2010 2SS/RS- every option possible in 2010

Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights.
Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps.
Exterior lights- tinted tail lights and sidemarker lights.
Wheels- powdercoated stock RS 20' wheels black
Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete.
Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros.
CamaroDIYking is offline   Reply With Quote
Old 05-21-2013, 03:31 PM   #4
CamaroSkooter
Retarded One-Legged Owl
 
CamaroSkooter's Avatar
 
Drives: 2010 Black Camaro 2SS
Join Date: Oct 2008
Location: San Antonio, TX
Posts: 9,640
Their online store has a Camaro specific section.

Four of the options are 2.5" kits, one for the L99, one for the V6, one for the LS3, and one for a 2.5" ARH exhaust system.

Their only 3" Camaro-specific kit is actually specific to a 3" ARH exhaust system.

Therefore, if you have a 3" Dynomax cat-back exhaust system, then more than likely none of the kits in their website's Camaro specific section will be optimal for your application.

Therefore, I gave you the links to their generic 3" cutouts as well as the link to the optional turn-down.

__________________

My VIN = 2G1FK1EJ9A9105017
Build Date: 04-23-2009 according to:
http://www.compnine.com/vid.php
CamaroSkooter is offline   Reply With Quote
Old 05-21-2013, 03:54 PM   #5
CamaroDIYking
 
Drives: 2010 Camaro 2SS/RS
Join Date: Feb 2013
Location: Georgia
Posts: 229
Yeah that's what I was saying...I think lol. I'm still confused somewhat.
__________________
2010 2SS/RS- every option possible in 2010

Lighting- LED footwell, grille, trunk, and engine lights done via DIY. LED dome, DRL, and tag lights.
Paint- Painted engine cover, steering wheel bezel, speedometer bezel, front bowtie, tail light bezels, wheel center caps.
Exterior lights- tinted tail lights and sidemarker lights.
Wheels- powdercoated stock RS 20' wheels black
Exhaust- Cat-back Dynomax Bullet Exhaust system with bullet muffler delete.
Misc- rear blackout kit from Big Worm Graphix, black side Camaro lettering from Emblem Pros, and rear Camaro lettering from Emblem Pros.
CamaroDIYking is offline   Reply With Quote
Old 05-24-2013, 03:28 AM   #6
Nevadabill
 
Nevadabill's Avatar
 
Drives: 2010 Camaro 2SS
Join Date: Mar 2012
Location: Dayton, Nevada
Posts: 53
Quote:
Originally Posted by CamaroDIYking View Post
Yeah that's what I was saying...I think lol. I'm still confused somewhat.
E-mail or call them (Noweeds). Their very helpful. Were with me anyway.
__________________
Nevadabill is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.