Top secret Emblempros.com parts development - Camaro Forum - 2011 Camaro 2010 Camaro / Camaro Z28 SS Forums

dragonZ28 · 06-27-2009, 09:11 PM

I managed to sneak into our garage and get these pictures...

There are many items on the way. We designed about 10 new things today, and we still have more to do. I think the finished product will look amazing - 18GA mirror stainless steel.

ljustin293 · 06-27-2009, 09:12 PM

Halo2 · 06-27-2009, 09:21 PM

Do they come with the scotch tape or is that extra ?

dragonZ28 · 06-27-2009, 09:23 PM

Quote:

Originally Posted by Halo2

Do they come with the scotch tape or is that extra ?

That's premium scotch tape and it adds $500 to the price.

In all seriousness, these will be laser-cut mirror stainless steel pieces that mount with 3M tape.

RedRaider · 06-27-2009, 10:45 PM

The emblempros.com decal is a little crooked

tjd24 · 06-27-2009, 10:52 PM

There are two holes to hold the Chevy bowtie - what are you using to cover them up? The pictures show the "Camaro" over the stock bowtie...

dragonZ28 · 06-28-2009, 12:09 AM

Quote:

Originally Posted by tjd24

There are two holes to hold the Chevy bowtie - what are you using to cover them up? The pictures show the "Camaro" over the stock bowtie...

Yes, we know that. We are going to design the "CAMARO" letters to cover these holes. The applied 3M tape will seal the holes from any moisture entering the trunk.

Jferrell88 · 06-28-2009, 12:55 AM

cool cant wait to see more hopefully some bowties

kdoske · 06-28-2009, 01:05 AM

look good.

1320junkie · 06-28-2009, 01:10 AM

Looks like a regular house garage to me, why'd you have to sneak in there?..lol

dragonZ28 · 06-28-2009, 07:22 AM

Quote:

Originally Posted by 1320junkie

Looks like a regular house garage to me, why'd you have to sneak in there?..lol

I was just joking. I wanted to seem sneaky.

Supermans · 06-28-2009, 07:24 AM

So what are you doing to the mailslot??

dragonZ28 · 06-28-2009, 07:57 AM

Quote:

Originally Posted by Supermans

So what are you doing to the mailslot??

I am going to make a stainless piece that replaces the plastic factory piece. By replacing it, the stainless piece is, by design, not as thick front to back, so it appears more recessed into the front bumper cover and gives the front end a more aggressive look. The factory piece just pulls straight out.

We are also doing side marker trim (front and rear), a cupholder switchplate, dash plaque, and several other items.

GRM RPR · 06-28-2009, 09:49 AM

Like the Camaro emblem on the rear but IMHO I think they are too big...maybe shrink them down 25% so they don't go all the way across. I think it dominates the look too much. I was wondering if you had given any thought of doing the emblem in Cursive?

fixxer56 · 06-28-2009, 01:49 PM

When can we expect to start seeing these items on your web site?

CatiaJockey · 06-28-2009, 02:08 PM

Interesting, can't wait to see completed.

dragonZ28 · 06-28-2009, 02:18 PM

Quote:

Originally Posted by fixxer56

When can we expect to start seeing these items on your web site?

You will see many items pop up on the site next week.

Some items will have to wait a few weeks for GM licensing approval. Anything we make with a name or logo must be submitted to GM for an amended contract with new part #s.

dragonZ28 · 06-28-2009, 02:19 PM

Quote:

Originally Posted by GRM RPR

Like the Camaro emblem on the rear but IMHO I think they are too big...maybe shrink them down 25% so they don't go all the way across. I think it dominates the look too much. I was wondering if you had given any thought of doing the emblem in Cursive?

In person, they looked like a good size. The truth is, it isn't up to us, it is up to the car. We have to scale them emblem so that the holes are covered under the bowtie. Too large or too small will not cover them - The lettering has to be just right.

GRM RPR · 06-28-2009, 05:09 PM

Quote:

Originally Posted by dragonZ28

In person, they looked like a good size. The truth is, it isn't up to us, it is up to the car. We have to scale them emblem so that the holes are covered under the bowtie. Too large or too small will not cover them - The lettering has to be just right.

Yeah, pictures never do this car or anything on the car justice....I hope you have them ready soon. I am planning on blacking out that panel and would like to get the "CAMARO" emblem on the back. I am ready to buy when they are ready.

Any chance you would do an SS emblem (Chrome with choice of color in the middle) to replace the Chevy Emblem on the grill?

snofyter · 06-28-2009, 06:10 PM

Have you thought about designing something for the dash at the glove box? I would be interested in something that could go there but that would not become a lethal projectile if the air bag goes off.

Maybe something like:

2010 Camaro Pre-Order
304 hp V6 Vin#xxxx
Built month day, 2009

BLUEMARO · 06-28-2009, 06:12 PM

Those are nice in case you forget that you are driving a Camaro

dragonZ28 · 06-28-2009, 07:49 PM

Quote:

Originally Posted by BLUEMARO

Those are nice in case you forget that you are driving a Camaro

I guess that Mustang drivers forget they're driving Mustangs, I guess that H2 drivers forget they're driving H2s, I guess that GTO drivers forget they're driving GTOs, I guess that Corvette drivers forget they're driving Corvettes, I guess that 93-02 Camaro drivers forget they're driving 93-02 Camaros, I guess that 93-02 Firebird drivers forget they're driving 93-02 Pontiacs, Saturns, Celicas, Eclipses, so on and so forth.

I think they put the name on the back for othe drivers to see and recognize the name. I am pretty sure the driver cannot see the back while they're driving.

I'm just offering parts to spruce it up.

CGM2SSRS · 06-28-2009, 07:49 PM

Quote:

Originally Posted by dragonZ28

I am going to make a stainless piece that replaces the plastic factory piece. By replacing it, the stainless piece is, by design, not as thick front to back, so it appears more recessed into the front bumper cover and gives the front end a more aggressive look. The factory piece just pulls straight out.

We are also doing side marker trim (front and rear), a cupholder switchplate, dash plaque, and several other items.

mmmmmm, I can't wait to see that slot cover. Damn roger your taking an awful lot of my money. And I like it! hahahahaha....

dragonZ28 · 06-28-2009, 11:45 PM

Quote:

Originally Posted by CGM2SSRS

mmmmmm, I can't wait to see that slot cover. Damn roger your taking an awful lot of my money. And I like it! hahahahaha....

It'll look good.

dragonZ28 · 06-28-2009, 11:46 PM

UPDATE:

Bowtie removed, CAMARO text smaller:

I should have mirror stainless installed pics in the next few days...

06-27-2009, 09:11 PM	#1
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 770	Top secret Emblempros.com parts development I managed to sneak into our garage and get these pictures... There are many items on the way. We designed about 10 new things today, and we still have more to do. I think the finished product will look amazing - 18GA mirror stainless steel. __________________ 2010 Camaro 2SS/RS Last edited by dragonZ28; 06-29-2009 at 12:43 AM.

06-27-2009, 09:12 PM	#2
ljustin293 Drives: 2010 VR CAMARO 2SS/RS Join Date: Aug 2008 Location: GA Posts: 14,692 View My Garage	__________________

06-27-2009, 10:52 PM	#6
tjd24 'till next time Oshawa !! Drives: 2010 2LT RS 2G1FC1EV4A9103434 Join Date: May 2009 Location: NW NJ Posts: 3,147 View My Garage	There are two holes to hold the Chevy bowtie - what are you using to cover them up? The pictures show the "Camaro" over the stock bowtie... __________________ http://www.hubgarage.com/mygarage/tjd24 *#3434 Born 4-15-2009, came home to visit GM Oshawa 8-20-2010 BBOMG*

06-28-2009, 12:55 AM	#8
Jferrell88 Drives: black 2ss/rs Join Date: Oct 2008 Location: Proctorville, OH Posts: 733 View My Garage	cool cant wait to see more hopefully some bowties __________________

06-28-2009, 01:05 AM	#9
kdoske Waiting For My 1SS/RS SIM Drives: Sold My Lancer, now carless :/ Join Date: Apr 2009 Location: louisiana Posts: 956	look good. __________________ Order# NJPW8K 1SS/RS SIM Black Interior 1100 (original order date): 04/16/09 2000 (dealer received allocation): 2500 (order preferenced): 3000 (accepted to production): 3300 (scheduled for prod): 3400 (broadcast): 3800 (produced): 4000/4B00 (available to ship/bayed): 4200 (shipped): 4300 (intermediate, may be multiple):

06-27-2009, 09:21 PM	#3
Halo2 Drives: 04 Mercury Marauder Join Date: Apr 2009 Location: NC Posts: 134	Do they come with the scotch tape or is that extra ?

06-27-2009, 10:45 PM	#5
RedRaider Drives: 2000 Tahoe LT, 2010 2LT/RS Join Date: Jun 2009 Location: Garland, TX Posts: 377 View My Garage	The emblempros.com decal is a little crooked

06-28-2009, 01:10 AM	#10
1320junkie Drives: The Imperial Army Join Date: Feb 2009 Location: The Darkside Posts: 15,916	Looks like a regular house garage to me, why'd you have to sneak in there?..lol

06-28-2009, 07:24 AM	#12
Supermans Camaro & Stang Enthusiast Drives: 2011 Mustang 5.0 in Kona Blue Join Date: Mar 2008 Location: Miami Posts: 4,762 View My Garage	So what are you doing to the mailslot?? __________________ Bought my Camaro from Eric Hall(817) 421-7266

06-28-2009, 09:49 AM	#14
GRM RPR Drives: 2005 Chevy Trailblazer LT Join Date: Apr 2009 Location: New Jersey Posts: 96	Like the Camaro emblem on the rear but IMHO I think they are too big...maybe shrink them down 25% so they don't go all the way across. I think it dominates the look too much. I was wondering if you had given any thought of doing the emblem in Cursive? __________________ Proud Owner: 2010 Camaro 2SS Cyber Gray Metallic/Black Interior VIN: 2G1FT1EW0A9109465 Purchased on 27 May 2009 Sales: Allyson Bailey , Ayers Chevrolet in Dover, NJ R6P folks have waited for long enough GM!!! Build early orders before any new dealer orders regardless of allocation. Stop treating your most loyal customers so unfairly!!!

06-28-2009, 01:49 PM	#15
fixxer56 Thin Blue Line Drives: ABM 2LT/RS #10094 Join Date: Oct 2008 Location: N=N* fp ne fl fi fc fL Posts: 1,281 View My Garage	When can we expect to start seeing these items on your web site? __________________ One of the "Few Blue"

06-28-2009, 02:08 PM	#16
CatiaJockey Drives: 2010 2LT/RS Join Date: Mar 2008 Location: Vancleave, Ms Posts: 2,105 View My Garage	Interesting, can't wait to see completed. __________________

06-28-2009, 06:10 PM	#20
snofyter 2G1FC1EV7A9108529 Drives: 99 Durango, 06 Trailblazer Join Date: Dec 2008 Location: Omaha, NE Posts: 225	Dash Plate Have you thought about designing something for the dash at the glove box? I would be interested in something that could go there but that would not become a lethal projectile if the air bag goes off. Maybe something like: 2010 Camaro Pre-Order 304 hp V6 Vin#xxxx Built month day, 2009 __________________ Ralley Yellow 2 LT / RS with custom stripes 1100: Nov. 8, 2008; 2000: Apr. 13, 2009;2500: Apr. 14, 2009; 3000: Apr. 14, 2009; 3100: Apr. 23, 2009; 3300: Apr. 23, 2009; 3400: May 1, 2009; 3800: May 7, 2009; 4000:May 23, 2009; 4104: May 25, 2009; 4B00: May 23, 2009; 4106: May 28, 2009; 4150: May 28, 2009; 4200: May 28, 2009; 4B00: May 28, 2009; 4800: June 4,2009; 4B00: June 4,2009; 4200: June 5, 2009 2G1FC1EV7A9108529

06-28-2009, 06:12 PM	#21
BLUEMARO A Classical Greek Drives: DTS, Bonneville and an SS ! Join Date: Feb 2009 Location: Grand Blanc MI Posts: 239	Those are nice in case you forget that you are driving a Camaro

06-28-2009, 11:46 PM	#25
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 770	UPDATE: Bowtie removed, CAMARO text smaller: I should have mirror stainless installed pics in the next few days... __________________ 2010 Camaro 2SS/RS Last edited by dragonZ28; 06-29-2009 at 12:40 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Emblempros.com made some parts - installed pictures...	dragonZ28	Cosmetics and Lighting Modification Discussions	59	11-21-2009 11:18 AM
Hardcore racers rejoice!! GM Performance Parts to offer new Camaro body in white	radz28	5th Gen Camaro SS LS LT General Discussions	24	12-22-2008 10:57 AM
GM UK takes two Top Gear Awards	camaro5	General Automotive + Other Cars Discussion	15	12-01-2008 07:36 PM
Ford gets 5 top quality awards	KILLER74Z28	General Automotive + Other Cars Discussion	5	06-13-2007 01:28 AM