Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
River City Camaro Customs
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics

Camaro ZL1 Forum - ZL1 Specific Topics Camaro ZL1 specific topics

Reply
 
Thread Tools
Old 06-17-2013, 10:04 PM   #1
Modern07
Mid-Florida Camaro Club
 
Modern07's Avatar
 
Drives: 2013 ZL1 #2303
Join Date: Jan 2011
Location: Heathrow, FL
Posts: 2,903
Booked in for some Goodies..

Well, I lasted 8 months with cosmetic mods only, (apart from a Rotofab CAI), but she'll be going in to Matt & Rodney @ FSP in Florida for some power adders in the next few weeks...

She'll come out with the following installed:

Pfadt Tri-Y Stainless Steel Headers
Rotofab CAI
Metco Motorsports 2.50" Supercharger Pulley
Heavy Duty Solid Isolator Coupling
Gates 65.3" Supercharger Belt - Green Stripe HD
SLP 160 Degree Thermostat
FSP ATI ZL1 Super Damper Kit
- Includes Serpentine 8_Rib Belt
- Includes 10% OD Balancer Pulley
ID850 Injectors
Custom Dyno Tune

What should I be hoping for power wise with the above do we think? It's a Manual Transmission.

I was tempted to add a Blower Cam to the mix too but opted against it for now, and besides, it gives me something to go back for!!
__________________
Modern07 is offline   Reply With Quote
Old 06-17-2013, 10:08 PM   #2
CanadianZL1#992
 
Drives: 2012 Camaro ZL1 Davenport Stage 5+
Join Date: May 2012
Location: Alberta, Canada
Posts: 720
It's close to my build except I did a cam and valve springs. Mine dyno'd 632 rwhp 620 rwtq. I'd guess 600 rwhp at least
CanadianZL1#992 is offline   Reply With Quote
Old 06-17-2013, 10:39 PM   #3
2012-1822


 
2012-1822's Avatar
 
Drives: Black ZL1
Join Date: Apr 2013
Location: City of Champions, Alabama
Posts: 3,746
I don't know, excited for you, can't wait for you to get back to us with dyno and pics, maybe a 1/4 mile video
__________________
Check out Alabama Camaros, for Camaro enthusiasts all around Alabama https://www.facebook.com/groups/1739...group_activity
2012-1822 is offline   Reply With Quote
Old 06-17-2013, 10:44 PM   #4
Modern07
Mid-Florida Camaro Club
 
Modern07's Avatar
 
Drives: 2013 ZL1 #2303
Join Date: Jan 2011
Location: Heathrow, FL
Posts: 2,903
Quote:
Originally Posted by CanadianZL1#992 View Post
It's close to my build except I did a cam and valve springs. Mine dyno'd 632 rwhp 620 rwtq. I'd guess 600 rwhp at least
Well I had it on a Dynojet with just the Rotofab and it made 526rwhp and 510ft/lb Torque, but FSP have a Mustang Dyno and they read lower than the Dynojets, so yeah I'm hoping at least 600rwhp....but we'll see!

Quote:
Originally Posted by 2012-1822 View Post
I don't know, excited for you, can't wait for you to get back to us with dyno and pics, maybe a 1/4 mile video
Well I've never been on a 1/4 mile in my life so it wouldn't be pretty - I'm planning to take it out before I have it in to the shop though just to see what it put's down (even with my skill level), and then when I get it back I'll take it out again and see how much quicker it is!
__________________
Modern07 is offline   Reply With Quote
Old 06-17-2013, 10:50 PM   #5
CanadianZL1#992
 
Drives: 2012 Camaro ZL1 Davenport Stage 5+
Join Date: May 2012
Location: Alberta, Canada
Posts: 720
Quote:
Originally Posted by Modern07 View Post
Well I had it on a Dynojet with just the Rotofab and it made 526rwhp and 510ft/lb Torque, but FSP have a Mustang Dyno and they read lower than the Dynojets, so yeah I'm hoping at least 600rwhp....but we'll see!
Mine baselined 502rwhp 508rwtq completely stock. I don't think our dyno results are corrected for altitude and my car is only tuned for 91 octane gas. No sure what the altitude is in Calgary Alberta but its at the foothills of the Rocky Mountains Dyno was a dynojet.
CanadianZL1#992 is offline   Reply With Quote
Old 06-17-2013, 10:52 PM   #6
CanadianZL1#992
 
Drives: 2012 Camaro ZL1 Davenport Stage 5+
Join Date: May 2012
Location: Alberta, Canada
Posts: 720
I just googled it. The altitude is 3550ft above sea level
CanadianZL1#992 is offline   Reply With Quote
Old 06-17-2013, 10:57 PM   #7
Modern07
Mid-Florida Camaro Club
 
Modern07's Avatar
 
Drives: 2013 ZL1 #2303
Join Date: Jan 2011
Location: Heathrow, FL
Posts: 2,903
Quote:
Originally Posted by CanadianZL1#992 View Post
I just googled it. The altitude is 3550ft above sea level
Well I'm in Florida at sea-level, and running 93 Octane, so that will maybe make a little bit of a difference at least, although FI cars are not as affected by altitude I don't think?

The heat/humidity is an issue here in FL though.

Either way, I know she's going to be a handful when I get her back!
__________________
Modern07 is offline   Reply With Quote
Old 06-18-2013, 02:30 AM   #8
PWRHSEZL1
 
PWRHSEZL1's Avatar
 
Drives: 2013 Camaro ZL1 #2419
Join Date: Jan 2013
Location: Keller, Tx
Posts: 206
My mod list looks very similar, except I'm not doing the lower pulley or a cold air intake right now! Waiting on CAI to finish up with theirs! I decided to go ahead with the cam kit and a high volume oil pump! We're thinking around 650 to the wheels! Should be finished up by the first of July.... Will post dyno chart and video as soon as possible! I would guess you should be about 620 to the wheels!

Last edited by PWRHSEZL1; 06-18-2013 at 05:08 AM.
PWRHSEZL1 is offline   Reply With Quote
Old 06-18-2013, 06:52 AM   #9
joes407


 
joes407's Avatar
 
Drives: 2014 ZL1m6 red hot #569
Join Date: Dec 2009
Location: florida
Posts: 2,353
Quote:
Originally Posted by Modern07 View Post
Well, I lasted 8 months with cosmetic mods only, (apart from a Rotofab CAI), but she'll be going in to Matt & Rodney @ FSP in Florida for some power adders in the next few weeks...

She'll come out with the following installed:

Pfadt Tri-Y Stainless Steel Headers
Rotofab CAI
Metco Motorsports 2.50" Supercharger Pulley
Heavy Duty Solid Isolator Coupling
Gates 65.3" Supercharger Belt - Green Stripe HD
SLP 160 Degree Thermostat
FSP ATI ZL1 Super Damper Kit
- Includes Serpentine 8_Rib Belt
- Includes 10% OD Balancer Pulley
ID850 Injectors
Custom Dyno Tune

What should I be hoping for power wise with the above do we think? It's a Manual Transmission.

I was tempted to add a Blower Cam to the mix too but opted against it for now, and besides, it gives me something to go back for!!
I see you've added injectors to the build list since I saw you. I thought you were getting American racing headers coated?
joes407 is offline   Reply With Quote
Old 06-18-2013, 07:56 AM   #10
Modern07
Mid-Florida Camaro Club
 
Modern07's Avatar
 
Drives: 2013 ZL1 #2303
Join Date: Jan 2011
Location: Heathrow, FL
Posts: 2,903
Quote:
Originally Posted by joes407 View Post
I see you've added injectors to the build list since I saw you. I thought you were getting American racing headers coated?
Added ID850 injectors and the 10% Overdrive Pulley - was thinking Blower Cam too but that is the next mod down the line

I had originally ordered the ARH coated headers with X-Pipe - but that was before Pfadt posted that their Tri-Y headers were coming out - as soon as I saw that and read about how well rated they are on the Corvette I decided to change to the Pfadt ones - the extra bonus being that the Belly Pan doesn't need to be cut
__________________
Modern07 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.