Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Kraft Werks
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V6 LFX Engine, Exhaust, and Bolt-Ons

Camaro V6 LFX Engine, Exhaust, and Bolt-Ons For all LFX related parts

Reply
 
Thread Tools
Old 05-28-2013, 09:22 AM   #1
TheShowStopperLFX
 
TheShowStopperLFX's Avatar
 
Drives: 2012 LFX
Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
Cool Custom CNC TB

Has anything done a Custom CNC TB. I work at a Machine shop and was thinking of doing it my self. my plan was to take the tb gasket and ported it out no more than where the gasket starts. if anyone has done this please let me know your out take on this.

Thanks,
TheShowStopperLFX is offline   Reply With Quote
Old 05-28-2013, 09:44 AM   #2
IneedAZ

 
IneedAZ's Avatar
 
Drives: not enough power
Join Date: Mar 2009
Location: Tampa
Posts: 1,581
http://www.camaro5.com/forums/showth...highlight=vmax
__________________
2012: Vmax TBody, CAI w/scoop, Solo HFC, ZL1 FP, Magnaflow TruX, Dynomax VT, RX catch can, HP Tune, BMR; Springs, Sways, Trailing Arms, Toe Ends, & Safety Loop, Koni str.t, Pioneer Z150bh, Phoenix Gold Sub, Hertz speakers & 5ch Amp, SS rear with 3.91 gears w/Eaton TrueTrac, and BMR bushings, Baer Decela Rotors, Goodridge brake lines, Brembo(GM) 4 piston calipers, Hawk Ceramic pads, and Vredestein Ultrac Sessanta Tires, Ny-Trex Nitrous, and more. 345RWHP/354lbsTQ 12.8@108
IneedAZ is offline   Reply With Quote
Old 05-28-2013, 09:48 AM   #3
Matt @ FSP

 
Matt @ FSP's Avatar
 
Drives: 2011 Camaro SS
Join Date: Dec 2012
Location: Bradenton, FL
Posts: 2,505
Quote:
Originally Posted by IneedAZ View Post

VMax

What you have to watch tho Showstopper is the bore area around the blade. If that is opened up just a hair too much, then the idle will be high and would need to be accounted for with tuning (Removing airflow from the factory parameters).
Matt @ FSP is offline   Reply With Quote
Old 05-28-2013, 10:05 AM   #4
TheShowStopperLFX
 
TheShowStopperLFX's Avatar
 
Drives: 2012 LFX
Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
Quote:
Originally Posted by Matt @ FSP View Post
VMax

What you have to watch tho Showstopper is the bore area around the blade. If that is opened up just a hair too much, then the idle will be high and would need to be accounted for with tuning (Removing airflow from the factory parameters).

I kinda figure that. i wasnt sure, about the TB Blade.
TheShowStopperLFX is offline   Reply With Quote
Old 05-28-2013, 10:07 AM   #5
TheShowStopperLFX
 
TheShowStopperLFX's Avatar
 
Drives: 2012 LFX
Join Date: Mar 2013
Location: Macomb,Michigan
Posts: 102
Wink

Quote:
Originally Posted by IneedAZ View Post

Thanks, I know about the VMax TB. My company wanna get into making custom stuff and the guys at the shop like my car so they wanted to CNC my TB
TheShowStopperLFX is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.