Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Dyno Max
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)

V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) Driveshafts | Differentials | Gears | Rearends | Clutch | Shifters

Reply
 
Thread Tools
Old 09-16-2013, 08:21 PM   #1
RRTX-SS
 
RRTX-SS's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Oct 2012
Location: East, Tx
Posts: 205
9" kit questions.......vendors chime in please

well lets just say i already own 1400hp axles and just recieved a dss aluminum driveshaft from a friend who switched to an auto 4l80e on his m6 car which had a 9" already in it. Are there any vendors who sell the 9" pumpkin/center section only or do they only sell as a kit?? anyone know please let me know......thanks
__________________
2010 Camaro 2SS/RS
416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE

1995 Camaro Z28 LT1 M6
383 Fully Forged shortblock
RRTX-SS is offline   Reply With Quote
Old 09-16-2013, 08:28 PM   #2
Chris82xx
Make your peace with God!
 
Chris82xx's Avatar
 
Drives: 2011 Camaro SS/RS M6 Convertible
Join Date: Dec 2011
Location: Dirty Jersey
Posts: 1,597
The only thing that I know of is DSS selling the Hammerhead.
__________________
ECS base supercharger (NOVI 1500SL), ECS AlKY control kit, 92mm TB, ARH 1 7/8" LT's non-catted, Borla 3" exhaust, ID850 injectors, Squash fuel system, ECS Big Blower Cam, MGW short throw shifter, DSS 1000hp axles, LGW differential cover, billet caps, Tech AFX heater hoses, Pedders differential bushings, Eaton TrueTrac differential, PRC dual valve springs, Katech C5R timing chain, ATI balancer, Meilings oil pump, Pfadt Trailing Arms, Pfadt Tie Rods, Pfadt Sway Bars, Pfadt End Links, DSS Aluminum Driveshaft

811RWHP/719RWTQ


UNDER MAJOR OVERHAUL!!
Chris82xx is offline   Reply With Quote
Old 09-16-2013, 08:40 PM   #3
SUX2BU
Quit being a pu$$y
 
SUX2BU's Avatar
 
Drives: FAST
Join Date: Jan 2011
Location: Sachse TX (DFW)
Posts: 5,816
Quote:
Originally Posted by RRTX-SS View Post
well lets just say i already own 1400hp axles and just recieved a dss aluminum driveshaft from a friend who switched to an auto 4l80e on his m6 car which had a 9" already in it. Are there any vendors who sell the 9" pumpkin/center section only or do they only sell as a kit?? anyone know please let me know......thanks
I've read Frank at DSS post a few times that if you already own the axles you can send them in to get swapped to the 9" ends and they can supply you with the rest of the kit.

Give them a phone call.
SUX2BU is offline   Reply With Quote
Old 09-16-2013, 08:57 PM   #4
RRTX-SS
 
RRTX-SS's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Oct 2012
Location: East, Tx
Posts: 205
well thats pretty cool ill have to give em a call pretty soon thanks for the info......man idk if u remember me but i drove the black kenne bell camaro that ran like crap at the track at dallas raceway a while back lol......loved ur car man looked sick on those welds!!! have u been up there lately man

Quote:
Originally Posted by SUX2BU View Post
I've read Frank at DSS post a few times that if you already own the axles you can send them in to get swapped to the 9" ends and they can supply you with the rest of the kit.

Give them a phone call.
__________________
2010 Camaro 2SS/RS
416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE

1995 Camaro Z28 LT1 M6
383 Fully Forged shortblock
RRTX-SS is offline   Reply With Quote
Old 09-16-2013, 09:45 PM   #5
SUX2BU
Quit being a pu$$y
 
SUX2BU's Avatar
 
Drives: FAST
Join Date: Jan 2011
Location: Sachse TX (DFW)
Posts: 5,816
Quote:
Originally Posted by RRTX-SS View Post
well thats pretty cool ill have to give em a call pretty soon thanks for the info......man idk if u remember me but i drove the black kenne bell camaro that ran like crap at the track at dallas raceway a while back lol......loved ur car man looked sick on those welds!!! have u been up there lately man
Yeah, I remember. Haven't been out in forever. I got a 9" with 4.57s installed so I'm itching to get back out there. But we just had another kid so I've been busy with diaper duty.
SUX2BU is offline   Reply With Quote
Old 09-16-2013, 09:59 PM   #6
Chris82xx
Make your peace with God!
 
Chris82xx's Avatar
 
Drives: 2011 Camaro SS/RS M6 Convertible
Join Date: Dec 2011
Location: Dirty Jersey
Posts: 1,597
Quote:
Originally Posted by SUX2BU View Post
I've read Frank at DSS post a few times that if you already own the axles you can send them in to get swapped to the 9" ends and they can supply you with the rest of the kit.

Give them a phone call.
But, the difference in price isn't that much. The DSS doesn't come gears whereas the Hammerhead does.
__________________
ECS base supercharger (NOVI 1500SL), ECS AlKY control kit, 92mm TB, ARH 1 7/8" LT's non-catted, Borla 3" exhaust, ID850 injectors, Squash fuel system, ECS Big Blower Cam, MGW short throw shifter, DSS 1000hp axles, LGW differential cover, billet caps, Tech AFX heater hoses, Pedders differential bushings, Eaton TrueTrac differential, PRC dual valve springs, Katech C5R timing chain, ATI balancer, Meilings oil pump, Pfadt Trailing Arms, Pfadt Tie Rods, Pfadt Sway Bars, Pfadt End Links, DSS Aluminum Driveshaft

811RWHP/719RWTQ


UNDER MAJOR OVERHAUL!!
Chris82xx is offline   Reply With Quote
Old 09-16-2013, 10:04 PM   #7
RRTX-SS
 
RRTX-SS's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Oct 2012
Location: East, Tx
Posts: 205
lol diaper duty ill be there soon too man and congrats on the kiddos......lookin forward to seein ginger bust into 11's no problem now with a hard launch!! Its been way too hot too cant wait for cooler weather hope to c u up there soon man

Quote:
Originally Posted by SUX2BU View Post
Yeah, I remember. Haven't been out in forever. I got a 9" with 4.57s installed so I'm itching to get back out there. But we just had another kid so I've been busy with diaper duty.
__________________
2010 Camaro 2SS/RS
416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE

1995 Camaro Z28 LT1 M6
383 Fully Forged shortblock
RRTX-SS is offline   Reply With Quote
Old 09-16-2013, 10:07 PM   #8
RRTX-SS
 
RRTX-SS's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Oct 2012
Location: East, Tx
Posts: 205
i havent called anybody yet but online they seem to only offer the kit as well but then again it might be different*once i give a call
thanks for the input bud
Quote:
Originally Posted by Chris82xx View Post
But, the difference in price isn't that much. The DSS doesn't come gears whereas the Hammerhead does.
__________________
2010 Camaro 2SS/RS
416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE

1995 Camaro Z28 LT1 M6
383 Fully Forged shortblock
RRTX-SS is offline   Reply With Quote
Old 09-17-2013, 06:51 AM   #9
Rockit_z28
Team 1BAD DOG
 
Rockit_z28's Avatar
 
Drives: 2010 IOM 2SS/RS Auto
Join Date: Apr 2011
Location: Indian Land, SC
Posts: 855
Try Matt at FSP as he might be able to break the kit down for you. Otherwise, I would just call DSS directly. Frank is always willing to work with his customers and give them exactly what they need.
__________________
2010 Camaro 2SS/RS L99 IOM - 812RWHP 665RWTQ (10.06@138)
Go: DSS 9", RPM Level 7 4L65E, ECS Paxton Novi 1500, Meth, Squash Fuel, ID850, Gall Racing Forged LS3, A.I. Ported Heads, HR Custom Cam, BMR Suspension

Show: Custom Painted Stripes/Badges (Orange Pearl over White), Z/TA Spoiler, Hex Vents, Billet Custom Valve Covers, Emblem Pros, Weld Wheels
You Tube: http://www.youtube.com/user/1baddogracing

S.L. Customs: http://www.slcustomsonline.com/





Rockit_z28 is offline   Reply With Quote
Old 09-17-2013, 07:23 AM   #10
Driveshaftshop


 
Driveshaftshop's Avatar
 
Drives: own more cars than i can list
Join Date: Nov 2010
Location: Charlotte NC
Posts: 991
shoot me a PM or an email, the price listed on the site does include the centersection.
__________________
The Driveshaft Shop
Any of the parts we post about can be
purchased thru our extensive dealer network
If you want to see some of our latest Hi-Tech stuff click the picture below....
Driveshaftshop is offline   Reply With Quote
Old 09-17-2013, 08:20 AM   #11
Merc
COTW 12/5/11
 
Merc's Avatar
 
Drives: 2010 Camaro 2SSRS IOM
Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 8,494
I'm waiting for my 12 bolt Hammerhead to arrive from DSS at the end of the week. I will be doing an installation thread on the 12 bolt.

__________________
Merc is offline   Reply With Quote
Old 09-17-2013, 12:50 PM   #12
Driveshaftshop


 
Driveshaftshop's Avatar
 
Drives: own more cars than i can list
Join Date: Nov 2010
Location: Charlotte NC
Posts: 991
Quote:
Originally Posted by Merc View Post
I'm waiting for my 12 bolt Hammerhead to arrive from DSS at the end of the week. I will be doing an installation thread on the 12 bolt.


Whooo Hooo, enjoy it
__________________
The Driveshaft Shop
Any of the parts we post about can be
purchased thru our extensive dealer network
If you want to see some of our latest Hi-Tech stuff click the picture below....
Driveshaftshop is offline   Reply With Quote
Old 09-17-2013, 01:03 PM   #13
RRTX-SS
 
RRTX-SS's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Oct 2012
Location: East, Tx
Posts: 205
DSS thanks for the quick response and for pointing me in the right direction
__________________
2010 Camaro 2SS/RS
416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE

1995 Camaro Z28 LT1 M6
383 Fully Forged shortblock
RRTX-SS is offline   Reply With Quote
Old 09-17-2013, 01:43 PM   #14
Chris82xx
Make your peace with God!
 
Chris82xx's Avatar
 
Drives: 2011 Camaro SS/RS M6 Convertible
Join Date: Dec 2011
Location: Dirty Jersey
Posts: 1,597
Quote:
Originally Posted by RRTX-SS View Post
DSS thanks for the quick response and for pointing me in the right direction
I'm curious, what did they have to say?
__________________
ECS base supercharger (NOVI 1500SL), ECS AlKY control kit, 92mm TB, ARH 1 7/8" LT's non-catted, Borla 3" exhaust, ID850 injectors, Squash fuel system, ECS Big Blower Cam, MGW short throw shifter, DSS 1000hp axles, LGW differential cover, billet caps, Tech AFX heater hoses, Pedders differential bushings, Eaton TrueTrac differential, PRC dual valve springs, Katech C5R timing chain, ATI balancer, Meilings oil pump, Pfadt Trailing Arms, Pfadt Tie Rods, Pfadt Sway Bars, Pfadt End Links, DSS Aluminum Driveshaft

811RWHP/719RWTQ


UNDER MAJOR OVERHAUL!!
Chris82xx is offline   Reply With Quote
Old 09-17-2013, 02:43 PM   #15
GFORCE1320


 
Drives: 05 GTO
Join Date: Jul 2009
Location: Wichita, KS
Posts: 1,189
We sell center sections by them selves, give me a call if you need some more info.

Thanks
Chris
316-260-8433
__________________
GFORCE ENGINEERING
LIFETIME WARRANTY!
gforce1320@gmail.com
www.Gforce1320.com 316-260-8433
MONSTER CLUTCH DEALER

GFORCE1320 is offline   Reply With Quote
Old 09-17-2013, 03:02 PM   #16
RRTX-SS
 
RRTX-SS's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Oct 2012
Location: East, Tx
Posts: 205
Just as SUX2Bu said they will swap current axle end off to accommodate for 9" rear end stubs for a price, and could supply the rest of the parts necessary to complete the swap

Quote:
Originally Posted by Chris82xx View Post
I'm curious, what did they have to say?
__________________
2010 Camaro 2SS/RS
416 CI M6-LS3 Kenne Bell 3.6, Livernois Dual Fuel Pump Kit w/KB BAP, Futral Motorsports Blower Cam, SW 2"Headers, Zl1 Dual Mode Exhaust, Street Slayer Billet Twin-Disc Clutch,PFADT lowering springs and sway bars, Iforged Classic Wheels, AI Meth Injection, rx dual checkvalve catchcan, Innovators West 8-Rib pulley setup....690RWHP/701RWTQ @ 10 PSI-CALIBRATED BY KARGER @ SNL PERFORMANCE

1995 Camaro Z28 LT1 M6
383 Fully Forged shortblock
RRTX-SS is offline   Reply With Quote
Old 09-18-2013, 04:40 PM   #17
jrpxxii


 
jrpxxii's Avatar
 
Drives: 2010 Camaro SS/RS 427ci
Join Date: Jul 2009
Location: Bowling Green, Ky
Posts: 3,210
Call GForce
__________________
jrpxxii is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.