06-19-2013, 08:48 PM | #1 |
Lighting Mods..
Would you all mind posting some pictures of you light Mods you have done to your car..
I was thinking fist mod I need is to match my Fog lights with my Halo's and maybe some led's on the inside as well. |
|
06-19-2013, 08:52 PM | #2 |
Camaro CRAZY
|
$5 blue 80mm led rings (per set off eBay) & JDP Halo kit. |
06-19-2013, 08:53 PM | #3 |
Looks good!!
__________________
2012 2LT RS
Injen CAI Resonated X pipe's |
|
06-19-2013, 08:55 PM | #4 |
Drives: 2013 2SS/1LE and 2009 R1 Join Date: May 2013
Location: Jacksonville, Fl
Posts: 320
|
Looks crazy I like it!
|
06-19-2013, 08:56 PM | #5 |
Mid-Florida Camaro Club
|
I've got a few!
Halo fog lights and upgraded my upper halos to match, footwell lights, projector light in my front bumper, grill lighting, sequential tail lights and rear lighted bowtie.
__________________
|
06-19-2013, 08:58 PM | #6 |
Drives: 2013 2SS/1LE and 2009 R1 Join Date: May 2013
Location: Jacksonville, Fl
Posts: 320
|
Lol looks like some one had the same idea as me I planned on adding those projectors under the front and in back.
|
06-19-2013, 08:59 PM | #7 |
Drives: 2011 Camaro ss Join Date: Apr 2013
Location: Leawood KS
Posts: 218
|
only have oracle halos
__________________
[2011 Camaro 2ss L99
-OEM Painted GFX -Borla Atak axle back -Stainless Power headers -Cold Air Inductions Intake -Blue oracle halos -Satin black ZL1 replicas -315 invos and other cosmetic mods |
06-19-2013, 09:00 PM | #8 |
Mid-Florida Camaro Club
|
Nice! I've had mine for a long while now and love it.
__________________
|
06-19-2013, 09:51 PM | #9 |
|
Not the best picture but this was just after installing the Night Owl JDP upgrade kit. I'm actually running two LED strips in the grill. I made a shield that goes behind the crash bar to divide the grill into upper and lower sections so the light does not bleed through and I have independent control of the color. I also replaced my fog light bulbs with LED ones from gen5diy. The fogs are also connected to the Night Owl kit. I also replaced my turn signal bulbs with chrome coated clear bulbs, but they have an aqua blue color to them and I just have not had a chance to replace them yet.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
06-19-2013, 10:00 PM | #10 |
__________________
|
|
06-19-2013, 10:02 PM | #11 |
Emerald Coast Camaros
Drives: A lot of show, not much go. Join Date: Mar 2011
Location: Emerald Coast
Posts: 3,388
|
See my build thread for more pics. Haha. Lighting can be fun!!!
|
06-19-2013, 10:08 PM | #12 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
|
06-19-2013, 10:34 PM | #13 |
|
How re you guys doing the grill lighting? What are they hooked up to since they can't be "always on" like my footwells where would I hook it up to?
I was hoping to order tonight and install this weekend. Please help. Links to LEDs/other things needed would be awesome.
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
06-19-2013, 10:54 PM | #14 |
I have mine hooked up to a switch mounted on the left side of the engine bay. I turn it on during car shows when the hood is popped. Nobody notices it's there since it matches the black wiring. You can either do it this way or run the switch to the inside of your car. Your choice. Good luck.
__________________
|
|
|
|
Thread Tools | |
|
|