Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Garage / Tools Discussions

Garage / Tools Discussions Discussions about garage setups and general tools discussions.

Reply
 
Thread Tools
Old 06-21-2013, 01:17 PM   #1
Mindz
E.B.A.H.
 
Mindz's Avatar
 
Drives: you wild...
Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,232
Help me start and build my garage project

So I'm getting ready to start compiling my list of tools needed for my garage and I need a bit of help.

As of now, I have a 55 piece cheapy kit that doesn't have very much, and I have a 26 piece home improvement kit from Cobalt which is more for hanging pictures and has some screw drivers. I will be getting a tool chest and fully stocking my garage but I want to plan out the tools so I don't miss anything. I will most likely be getting Craftsman tools as I can replace anything that breaks very easily. So all of these tools will be from Sears.

This list will be in a constant state of evolution but please help me add and complete it.

1. Screw drivers (at least 3 flathead, at least 3 Phillips)
2. sockets, metric (4mm-minimum of 26mm) and standard (1/8"-minumum of 1 1/2") in 3/8 and 1/2
3. Allen Wrench set (including large sizes)
4. Wrenches (Metric and Standard including large sizes)
5. Low profile Jack (Arcan XL35 most likely)
6. Torque wrench
7. Pipe
8. Creeper
9. Random Orbital
10. Extension cord
11. Air Compressor
12. Pulley puller
13. Crescent wrench
14. Shelving of some sort
15. Flooring (RaceDeck or Epoxy)
16. Microfiber towels
17. Décor for walls.
18. Gloves
19. Safety Glasses
20. Cordless Drill (with flashlight on same battery Hitachi)
21. Drop Light
22. Brake stool (Tailbone)
23. Jack stands
24. Torx socket set
25. Race ramps portable pit stop
26. Surge protectors
27. Spare batteries/charging station for tools
28. Air tools/Socket set
29. 4 Lb hammer
30. Nut driver
31. Ratchet 3/8" driver and 1/2" driver
32. Breaker bar(s)
33. Flexible adapter for ratchet
34. Screwdriver w/ flexible extension
35. Socket organizers
36. Garage can (50 gal.)
37. Brawny Industrial Cleaning Wipes
38. Oil Catch Pan
39. Bench Vise
40. 5 lb Lump Hammer
41. Dremel
42. Extension Cords
43. Channel Locks
44. Broom and Debris pan
45. Rags
46. Battery Tender
47. Buckets
48. Duct Tape
49. Electrical Tape
50. JB Weld
51. Dry Sweep
52. Possible work bench redesign
53. Air hose reel
54. Trim tool kit
55.
56.
57.
58.
59.
60.



What else do I need that I forgot off the top of my head?

Toolkit I'm shooting for: http://tinyurl.com/mm8s6l5
3/8" Torque Wrench driver: http://tinyurl.com/m5kws23
Tailbone Brake Stool: http://bonecreeper.com/tailbone.html
Flexible extension: http://tinyurl.com/m8nvf49
__________________
Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1
Mindz is offline   Reply With Quote
Old 06-21-2013, 01:31 PM   #2
mlee
H-Town Camaro Club
 
mlee's Avatar
 
Drives: Number Twenty-Three
Join Date: Oct 2008
Location: Conroe, TX
Posts: 24,869
Better hurry up and get that Porter Cable. They are going away and a more expensive one is replacing it.

- cordless drill w/ bits (a must)
- drop light
- brake stool
- jack stands
- torx set
__________________
.
mlee is offline   Reply With Quote
Old 06-21-2013, 01:40 PM   #3
The Stig
knows 2 facts about ducks
 
The Stig's Avatar
 
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 26,675
Quote:
Originally Posted by mlee View Post
Better hurry up and get that Porter Cable. They are going away and a more expensive one is replacing it.

- cordless drill w/ bits (a must)
- drop light
- brake stool
- jack stands
- torx set
+1

- mini fridge
- surge protector with multiple plug-ins (don't know about you but my garage doesn't have near enough outlets)
- spare batteries / battery charging stations for the cordless drill
__________________
Click to view my build thread
The Stig is offline   Reply With Quote
Old 06-21-2013, 01:50 PM   #4
CHMSC
ROAD COURSE JUNKIE
 
CHMSC's Avatar
 
Drives: 2012 SS/RS LS3
Join Date: Oct 2012
Location: Somewhere
Posts: 12,719
Air tools and sockets
__________________
CHMSC is online now   Reply With Quote
Old 06-21-2013, 01:52 PM   #5
Mindz
E.B.A.H.
 
Mindz's Avatar
 
Drives: you wild...
Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,232
Quote:
Originally Posted by mlee View Post
Better hurry up and get that Porter Cable. They are going away and a more expensive one is replacing it.

- cordless drill w/ bits (a must)
- drop light
- brake stool
- jack stands
- torx set
Added. Do I want the Torx set for screw driver bits, or like Sockets that fit torx screws?

Quote:
Originally Posted by The Stig View Post
+1

- mini fridge
- surge protector with multiple plug-ins (don't know about you but my garage doesn't have near enough outlets)
- spare batteries / battery charging stations for the cordless drill
I have the mini fridge in my man cave right inside the door from the garage.
Surge protectors are a must have, and the spare batteries will be with whatever company I get tools with. I don't think I'll continue with the Hitachi brand, because I don't think they make the rest of the tools I may or may not use, no?
__________________
Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1
Mindz is offline   Reply With Quote
Old 06-21-2013, 02:18 PM   #6
Stock6.0GTO
Under an ISX or DD15
 
Drives: GTO
Join Date: Jul 2009
Location: Modesto
Posts: 901
I'll take some pics today of my toolbox at work
but here's what I can think of off the top of my head including what you've said Jarrod:
cordless drills 3/8 and 1/2 drive
impact sockets in 3/8 and 1/2 drive metric and standard
sockets, metric (4mm-minimum of 26mm) and standard (1/8"-minumum of 1 1/2") in 3/8 and 1/2
torque wrenches in 3/8" and 1/2"
adapters and extensions for the rachets and sockets
wrenches (regular or ratcheting works) same sizes and sockets
set of screwdrivers (at least 23 piece)
set of nut drivers (yes this is a tool lol)
minimum of a 4lb hammer and also a dead blow hammer
and definitely a few breaker bars!!!
safety glass is a must
and a tool chest to store it all IMO
I'll post up the pics tomorrow Jarrod
__________________
2006 Pontiac GTO M6 1 of 475
Not driving your car to keep miles off of it, is like not having sex with your girlfriend so her next boyfriend will appreciate it more.
Stock6.0GTO is offline   Reply With Quote
Old 06-21-2013, 02:21 PM   #7
Mindz
E.B.A.H.
 
Mindz's Avatar
 
Drives: you wild...
Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,232
Quote:
Originally Posted by mlee View Post
Better hurry up and get that Porter Cable. They are going away and a more expensive one is replacing it.

- cordless drill w/ bits (a must)
- drop light
- brake stool
- jack stands
- torx set
Quote:
Originally Posted by King Nothing View Post
I'll take some pics today of my toolbox at work
but here's what I can think of off the top of my head including what you've said Jarrod:
cordless drills 3/8 and 1/2 drive
impact sockets in 3/8 and 1/2 drive metric and standard
sockets, metric (4mm-minimum of 26mm) and standard (1/8"-minumum of 1 1/2") in 3/8 and 1/2
wrenches (regular or ratcheting works) same sizes and sockets
set of screwdrivers (at least 23 piece)
set of nut drivers (yes this is a tool lol)
minimum of a 4lb hammer and also a dead blow hammer
and definitely a few breaker bars!!!
safety glass is a must
and a tool chest to store it all IMO
I'll post up the pics tomorrow Jarrod
You'll probably go with me when I buy the tools. Thanks for the input.
__________________
Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1
Mindz is offline   Reply With Quote
Old 06-21-2013, 02:28 PM   #8
Stock6.0GTO
Under an ISX or DD15
 
Drives: GTO
Join Date: Jul 2009
Location: Modesto
Posts: 901
I do love going tool shopping I can always find something useful for work, I just hope I've spent enough on tools to write it off on taxes
__________________
2006 Pontiac GTO M6 1 of 475
Not driving your car to keep miles off of it, is like not having sex with your girlfriend so her next boyfriend will appreciate it more.
Stock6.0GTO is offline   Reply With Quote
Old 06-21-2013, 03:56 PM   #9
mlee
H-Town Camaro Club
 
mlee's Avatar
 
Drives: Number Twenty-Three
Join Date: Oct 2008
Location: Conroe, TX
Posts: 24,869
Quote:
Originally Posted by Mindz View Post
Added. Do I want the Torx set for screw driver bits, or like Sockets that fit torx screws?
Sockets but a small size screwdriver set is very handy too.
__________________
.
mlee is offline   Reply With Quote
Old 06-21-2013, 04:04 PM   #10
Mindz
E.B.A.H.
 
Mindz's Avatar
 
Drives: you wild...
Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,232
I have a screwdriver with the torx bits that fit into the handle (10 or 12 sizes) so I think I'll only need the socket set.
__________________
Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1
Mindz is offline   Reply With Quote
Old 06-21-2013, 04:28 PM   #11
CamaroSpike23
Mr. Nitpicky
 
CamaroSpike23's Avatar
 
Drives: anything I can get my hands on
Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,915
Send a message via Yahoo to CamaroSpike23
couple questions first.

1. what do you plan on using the air compressor for? airing up tires, impact tools?

2. whats your budget?

3. Do you have 220V to the garage?

4. How much "serious" work do you plan to be performing in your garage? (engine pull, body work, suspension, exhaust, etc)

5. Whats your budget? (I know I asked twice, but some things you can skimp on... somethings you just shouldnt)
__________________
Never race anything you can't afford to light on fire and push off a cliff
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.

Quote:
Originally Posted by Bulldogwinters View Post
Read that link that Spike posted, it'll tell you everything you need to know.
Quote:
Originally Posted by WheelmanSS View Post
Post count is truly an accurate measure of how cool someone is on the Internet.
Quote:
Originally Posted by Greg Norris View Post
I piss excellence
and fart awesomeness
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.
"You can think I'm wrong, but that's no reason to quit thinking.”
Quote:
Originally Posted by Overflow View Post
But not all people were born awesome like you, Spike.
CamaroSpike23 is offline   Reply With Quote
Old 06-21-2013, 05:11 PM   #12
Mindz
E.B.A.H.
 
Mindz's Avatar
 
Drives: you wild...
Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,232
1. Tires, impact gun, clearing debris from garage with air hose, and drying the car after washing for detailing.

2. I don't have a budget, I'm putting together a list of tools I would like to eventually have. My birthday is coming up soon and one of the things people wanted me to make a list of was tools for my garage now that I own one.

3. I'm not sure, but will check when I get home.

4. I plan on doing all work to my car myself (from oil changes to engine pulling) unless it requires tools I don't have, in which case I'll take it to a shop.

5. Basically a weekend warrior, but a place that I can work on a project car doing most of the work myself or with buddies.
__________________
Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1
Mindz is offline   Reply With Quote
Old 06-21-2013, 05:20 PM   #13
CamaroSpike23
Mr. Nitpicky
 
CamaroSpike23's Avatar
 
Drives: anything I can get my hands on
Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,915
Send a message via Yahoo to CamaroSpike23
Quote:
Originally Posted by Mindz View Post
1. Tires, impact gun, clearing debris from garage with air hose, and drying the car after washing for detailing.

2. I don't have a budget, I'm putting together a list of tools I would like to eventually have. My birthday is coming up soon and one of the things people wanted me to make a list of was tools for my garage now that I own one.

3. I'm not sure, but will check when I get home.

4. I plan on doing all work to my car myself (from oil changes to engine pulling) unless it requires tools I don't have, in which case I'll take it to a shop.

5. Basically a weekend warrior, but a place that I can work on a project car doing most of the work myself or with buddies.

give me a few hours to go through my inventory in the garage and the truck box and I'll give you a list.
__________________
Never race anything you can't afford to light on fire and push off a cliff
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.

Quote:
Originally Posted by Bulldogwinters View Post
Read that link that Spike posted, it'll tell you everything you need to know.
Quote:
Originally Posted by WheelmanSS View Post
Post count is truly an accurate measure of how cool someone is on the Internet.
Quote:
Originally Posted by Greg Norris View Post
I piss excellence
and fart awesomeness
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.
"You can think I'm wrong, but that's no reason to quit thinking.”
Quote:
Originally Posted by Overflow View Post
But not all people were born awesome like you, Spike.
CamaroSpike23 is offline   Reply With Quote
Old 06-21-2013, 05:29 PM   #14
The Stig
knows 2 facts about ducks
 
The Stig's Avatar
 
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 26,675
Quote:
Originally Posted by mlee View Post
Sockets but a small size screwdriver set is very handy too.
Oh also one of those screwdrivers that has a flexible extension. I use mine so much now that I have it
__________________
Click to view my build thread
The Stig is offline   Reply With Quote
Old 06-21-2013, 05:43 PM   #15
Mindz
E.B.A.H.
 
Mindz's Avatar
 
Drives: you wild...
Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,232
Quote:
Originally Posted by CamaroSpike23 View Post
give me a few hours to go through my inventory in the garage and the truck box and I'll give you a list.
I look forward to reading it.


Quote:
Originally Posted by The Stig View Post
Oh also one of those screwdrivers that has a flexible extension. I use mine so much now that I have it
That's a good idea. Also the flexible ratchet adapter thing. What's that called?

And I think I'll need a telescoping magnet thing to find bolts/screws that fall and get swallowed up by the engine bay.
__________________
Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1
Mindz is offline   Reply With Quote
Old 06-21-2013, 06:53 PM   #16
MMC

 
MMC's Avatar
 
Drives: CGM 2SS/RS, 1987 & 2014 Silverado
Join Date: Oct 2010
Location: Spencerport, NY
Posts: 903
Don't plan on using an air compressor for blowing out the garage, a leaf blower works better. Air compressors are rated at CFM at a specific PSI make sure you get one rated for the biggest air tool you want to run. I also recommend you look at Milwaukee M-18 cordless tools. Look around for them and buy bare tools if you don't need a case. (drill, impact, hammer drill) I beat the snot out of Milwaukee tools and they have never failed for me. I also like SK tools and buy them at Mechanicstoolswarehouse.com and checkout stillmadeinusa.com I also find a Chapman set a must have item and for general use you cant get better than Klien tools, Fluke meters or Innova scan tools. Sometimes for single use items Harbor Freight or a rental but they will break.
If the cost for a tool exceeds the cost to have someone you trust do the work pay them to own the tool. For electrical work at home pay a professional to do the work for you. Nothing exceeds the saisfaction of doing something for yourself, just know your limitations.
__________________
MMC is offline   Reply With Quote
Old 06-21-2013, 06:55 PM   #17
Ryanbabz71


 
Ryanbabz71's Avatar
 
Drives: 2012 Camaro 2SS Convertible
Join Date: Jul 2011
Location: Avon, Indiana
Posts: 2,997
Dont create a budget it will take all the fun out of it

Must haves are air compressor (I have 2), plenty of air hose, and air hose reel, gear wrenches, air ratchet, tail bone seat, plenty of electrical outlets, good vacuum (and blower when washing vehicles), good cordless drill (lithum ion)

Plenty of oil and filters is a must too

Here are a few other items thats I have and really couldnt live without
Attached Images
     
__________________
Ryan
* 2012 2SS Camaro Convertible Ashen Gray
Car Photos http://www.camaro5.com/forums/showthread.php?t=257256
Ryanbabz71 is offline   Reply With Quote
Old 06-21-2013, 07:41 PM   #18
Mindz
E.B.A.H.
 
Mindz's Avatar
 
Drives: you wild...
Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,232
Thank you for the detailed answers guys. Looks like the tail bone gets great reviews all around. I like the wall mounted air compressor. Hopefully I can figure out how to mount one with the room in my garage as it's a 2 car garage and we plan on parking my Camaro and wife's equinox in there also.

I will look into the Milwaukee tools MMC. Thanks for the recommendation.
__________________
Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1
Mindz is offline   Reply With Quote
Old 06-22-2013, 12:14 AM   #19
CamaroSpike23
Mr. Nitpicky
 
CamaroSpike23's Avatar
 
Drives: anything I can get my hands on
Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,915
Send a message via Yahoo to CamaroSpike23
Quote:
Originally Posted by MMC View Post
Don't plan on using an air compressor for blowing out the garage, a leaf blower works better.
Air compressors are rated at CFM at a specific PSI make sure you get one rated for the biggest air tool you want to run.


If the cost for a tool exceeds the cost to have someone you trust do the work pay them to own the tool. For electrical work at home pay a professional to do the work for you. Nothing exceeds the saisfaction of doing something for yourself, just know your limitations.

to touch more on this. buy the biggest tank compressor you can afford (oiled pump too).
some air compressors are rated for impact tools, but suck for air grinders/etc because they don't move the volume of air that certain air tools require.

look at a pancake compressor, great for a nail gun that only needs a small volume of air at a high pressure, but crappy for an air grinder.


ideally you want the most CFM at the highest pressure.

which comes into play as well if you ever decide to spray paint down the road as well as you want at a minimum 9-11cfm@90psi


I've personally got my eyes on a couple different ones right now.
only major differences are the tank sizes (one is a 60 gal, the other is 80 gal). both are pushing 12cfm @90psi which will set me up for what I do now and in the future. Check out stores like Northern Tool, Tractor Supply Company, Rural King, etc for sales. I would have had the 60 gal one from TSC for ~$600 already had "personal issues" not transpired.
also, you can buy another air tank used to add to your volume and tie it inline.


Quote:
Originally Posted by Mindz View Post
Thank you for the detailed answers guys. Looks like the tail bone gets great reviews all around. I like the wall mounted air compressor. Hopefully I can figure out how to mount one with the room in my garage as it's a 2 car garage and we plan on parking my Camaro and wife's equinox in there also.

I will look into the Milwaukee tools MMC. Thanks for the recommendation.
depending on the type of room you have outside the garage, you can place the compressor there. however, be forwarned that you will need to enclose it as I have seen warranty claims on them get rejected in a heartbeat due to the customer leaving the compressor outside in the elements.

also, if you go with a larger compressor and/or you know you are going to be using it a lot, get 3 things

a filter
a dryer
a regulator (if the compressor doesnt come with one already)

for most people however, a 30 gal upright compressor will do most all the work they need done. Home Depot has one out IIRC for like $200 or something like that. its a 33 gal compressor with 9 or 10 cfm@90ps. pretty good overall. last I checked they had a sale with the compressor and an impact gun and an air ratchet combo

also...
http://www.eastwood.com/100-ft-rapid...arage-kit.html




as for the tools themselves, I've got so many different socket sets its not even funny. different brands, different sizes, everything. I've got a few big kits that I love, but ironically enough, the tool set that has saved my (or others') ass more times than not, is my little $20.00 ratchet set that I got for a stocking stuffer for christmas a few years back. ive got one in every car I own.

I picked up over 300 sockets for $50.00 a couple years ago on craigslist. they were rusted to crap and I spent another 20 bucks on some rust remover/metal restore and now they look pretty.

what I'm saying is you don't have to have a bunch of brand new tools.

however, if you've got the scratch to buy new, my favorite took kits (by craftsman anyway) are the 255 pc kit and the 309 pc kits.

http://www.craftsman.com/hand-tools-...=1371873503195

also
http://www.zorotools.com/g/00099101/k-G3922676?utm_source=google_shopping&utm_medium=cpc &utm_campaign=Google_Shopping_Feed&kw={keyword}&gc lid=CMOyzqLi9rcCFVNo7AodHhcAMg


that being said, I got the 255 pc kit on sale around christmas time for half of what it is listed for now and the 309 kit around fathers day a couple years back doing the same.


keep an eye out on the actual piece listing of the kits as well as a lot of them throw in 50 hex bits to bump the number up.

Also, a couple good sets of allen/hex and star key wrenches or socket adapters go a long way.

I don't have the most tools out there, I dont have the best tools out there even. but a good set of wrenches and sockets with a few screwdrivers will cover you for 99% of the work you will be doing.

a lot of the specialty tools I would hold off on getting until you actually need it.

one thing I will highly recommend are socket organizers. they are invaluable.

the tool boxes that most of my stuff came in have been trashed as they are made of plastic and while they have a nice spot for all the sockets to go, they aren't worth a damn if the tool box sees any motion (ie in the trunk of the car or the bed of the truck) because there is nothing holding them in place so they bounce around and get jammed up when you go to pull out a tray. then everything is disorganized.

which is why I have about 4 dozen of these around. some empty, some filled up. any of the ones that are filled are ID'd with the socket size range and the ratchet size as well for quick reference

__________________
Never race anything you can't afford to light on fire and push off a cliff
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.

Quote:
Originally Posted by Bulldogwinters View Post
Read that link that Spike posted, it'll tell you everything you need to know.
Quote:
Originally Posted by WheelmanSS View Post
Post count is truly an accurate measure of how cool someone is on the Internet.
Quote:
Originally Posted by Greg Norris View Post
I piss excellence
and fart awesomeness
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.
"You can think I'm wrong, but that's no reason to quit thinking.”
Quote:
Originally Posted by Overflow View Post
But not all people were born awesome like you, Spike.
CamaroSpike23 is offline   Reply With Quote
Old 06-22-2013, 01:05 AM   #20
Mindz
E.B.A.H.
 
Mindz's Avatar
 
Drives: you wild...
Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,232
Thanks for the writeup. The craftsman toolset you said goes on sale for half of the 239 and 249 prices?

That looks like a decent price as is. I also added the socket organizers.
__________________
Blue Rush, 2010 SS [Car of the Week 3/22/2010] Traded in on...ZLZBUBB, 2013 ZL1
Mindz is offline   Reply With Quote
Old 06-22-2013, 04:13 AM   #21
Stock6.0GTO
Under an ISX or DD15
 
Drives: GTO
Join Date: Jul 2009
Location: Modesto
Posts: 901
Quote:
Originally Posted by Mindz View Post
Thanks for the writeup. The craftsman toolset you said goes on sale for half of the 239 and 249 prices?

That looks like a decent price as is. I also added the socket organizers.
get the stand up plastic trays (didn't look to see if you meant those), the strips are a waste and if you have any heavy sockets they will fall off every time you move it, they will throw the weight off the strip off also. Sorry Jarrod I got hella busy at work tonight :( I'll take pics tomorrow at work and show off my work tools I'll show you my Craftsman Mechanics Tool Set I bought and use less than 1/4 of it lol
__________________
2006 Pontiac GTO M6 1 of 475
Not driving your car to keep miles off of it, is like not having sex with your girlfriend so her next boyfriend will appreciate it more.
Stock6.0GTO is offline   Reply With Quote
Old 06-22-2013, 04:17 AM   #22
Stock6.0GTO
Under an ISX or DD15
 
Drives: GTO
Join Date: Jul 2009
Location: Modesto
Posts: 901
BTW there is nothing on these cars you need an air compressor to get off that a cordless impact can't get off. I work with big boy toys and hardly use my air tools unless I need to remove a clutch brake, use a cordless impact or cordless drill for majority of work if i need to remove bolts, nuts etc etc Only good things for an air compressor is filling air in your tires and blowing out the garage.

Did I mention get a test light before you buy a DMM? I have both and hardly ever use my DMM. Test light is used on a daily basis, DMM is maybe once a week

A 3/8" or 1/2" cordless impact works great with the lug nuts on your car also. You shouldn't hammer those lug-nuts on anyway . . . stretches the threads. Get the lugs seated then use a torque wrench in a star pattern to finish it up.
__________________
2006 Pontiac GTO M6 1 of 475
Not driving your car to keep miles off of it, is like not having sex with your girlfriend so her next boyfriend will appreciate it more.
Stock6.0GTO is offline   Reply With Quote
Old 06-22-2013, 11:03 AM   #23
CamaroSpike23
Mr. Nitpicky
 
CamaroSpike23's Avatar
 
Drives: anything I can get my hands on
Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,915
Send a message via Yahoo to CamaroSpike23
Quote:
Originally Posted by Mindz View Post
Thanks for the writeup. The craftsman toolset you said goes on sale for half of the 239 and 249 prices?

That looks like a decent price as is. I also added the socket organizers.
I bought the $239 kit for ~$100 and the $249 kit for ~$150
Quote:
Originally Posted by King Nothing View Post
get the stand up plastic trays (didn't look to see if you meant those), the strips are a waste and if you have any heavy sockets they will fall off every time you move it, they will throw the weight off the strip off also. Sorry Jarrod I got hella busy at work tonight :( I'll take pics tomorrow at work and show off my work tools I'll show you my Craftsman Mechanics Tool Set I bought and use less than 1/4 of it lol
if you are only going to be using your tools in the garage, the stand up trays work well. I carry a few sets of tools with me in my truck and have used the stand up holders and after a few bumps, my sockets are laying all over the place.

most of my socket holders are the metal style that are more robust than the plastic insert ones.
__________________
Never race anything you can't afford to light on fire and push off a cliff
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.

Quote:
Originally Posted by Bulldogwinters View Post
Read that link that Spike posted, it'll tell you everything you need to know.
Quote:
Originally Posted by WheelmanSS View Post
Post count is truly an accurate measure of how cool someone is on the Internet.
Quote:
Originally Posted by Greg Norris View Post
I piss excellence
and fart awesomeness
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.
"You can think I'm wrong, but that's no reason to quit thinking.”
Quote:
Originally Posted by Overflow View Post
But not all people were born awesome like you, Spike.
CamaroSpike23 is offline   Reply With Quote
Old 06-22-2013, 11:17 AM   #24
Johnny@MTI

 
Johnny@MTI's Avatar
 
Drives: 99 ls1 miata
Join Date: Jun 2013
Location: United States
Posts: 194
I started with a s.k 200 piece rolling tool box. 15 years later it's grown into quite a collection.

Currently I'm working on getting my mini frige/stereo :P

Sent from my KFTT using Tapatalk 2
Johnny@MTI is offline   Reply With Quote
Old 06-22-2013, 12:36 PM   #25
Stock6.0GTO
Under an ISX or DD15
 
Drives: GTO
Join Date: Jul 2009
Location: Modesto
Posts: 901
Quote:
Originally Posted by CamaroSpike23 View Post
if you are only going to be using your tools in the garage, the stand up trays work well. I carry a few sets of tools with me in my truck and have used the stand up holders and after a few bumps, my sockets are laying all over the place.

most of my socket holders are the metal style that are more robust than the plastic insert ones.
I thought about this, Jarrod I absolutely agree with Spike! In a residential garage they are perfect because typically you don't use them on a daily basis, me on the other hand i shouldn't have got them lol In fact, if you want some 3/8" and 1/2" metal strips I might be upgrading to the plastic trays and I'll give you the ones in my tool box that I replace
__________________
2006 Pontiac GTO M6 1 of 475
Not driving your car to keep miles off of it, is like not having sex with your girlfriend so her next boyfriend will appreciate it more.
Stock6.0GTO is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:06 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.