My 2SS

[2SSRS]

Got my car on 6/2/09 after a long hold in QC, And this is what i will do to the car.
Car is a 2SS IOM paint and white rally stripes with orange two tone INT and an LS3 M6 Trans


PERFORMANCE:

* ARH After 5 months of beta testing i put on my headers and love it. Done

* New exhaust: Don't know the one i want at this time. most likely flowmaster Exhaust.

* CAI From Vararam. Done http://www.camaro5.com/forums/showth...431#post857431

* CAI from K&N droped car on 7-6-09 and back on 7-9-09 and i put up the info on this thread. Done Here is the Thread.http://www.camaro5.com/forums/showth...21#post1293321

* Tune: from some one that know something. It will be Chuck CoW. (Corvette's of Westchester in Ossining NY) As i think he is one of the best.

* Short throw shifter: See this Thread,http://www.camaro5.com/forums/showthread.php?t=26472 Done Or this one.
http://www.camaro5.com/forums/showthread.php?t=38452

*Wheels: will mod the car so i can put 335/30/20 on 20x11.5 rims and up to 305/35/20 in the front on some 20x10.5. Breed wheels Wow the rims look like killer.
http://www.camaro5.com/forums/showthread.php?t=48256

* Adjustable Coilover : Done see thread http://www.camaro5.com/forums/showthread.php?t=42285

* Suspension: will see whos soon.

* Big CI Engine: 650RWHP Or more. next year I am working on this I want A LSX 454 and GMPP is going to let it out of hiding soon.

EXTERIOR:
* Quad Rear Diffuser and tips.Done
* Relocate car Antenna. Done
* New fenders that look like the ones from a ZR1 Done
* Gm aftermarket grill
* some kind of front spoiler and may be ground Affix
* Add SS embloms Camaro badge on fender. Done
* Add SS embloms on trunk lid and front grill. Done
* Add Vent decal on the side.Done
* Add decal on the Engine cover.Done
* Add decal on the wheels. Done
* Tint all 5 Windows. Done
* Remove tail light Basel. Done
* New tail lights ( LED ). Donehttp://www.camaro5.com/forums/showthread.php?t=35170And this one http://www.camaro5.com/forums/showpo...8&postcount=91 And the last one http://www.camaro5.com/forums/showpo...1&postcount=94
And here is a DIY on how to make them.http://www.camaro5.com/forums/showthread.php?t=99721


INTERIOR:

* Add red LED's to my Homelink. Done see post 61
* ABL on the dash.Done http://www.camaro5.com/forums/showthread.php?t=40804
* ABL on the on the lower part of the door panel.http://www.camaro5.com/forums/showthread.php?t=101437
* G8 Pedal covers. http://www.camaro5.com/forums/showpo...9&postcount=62Done
* Steering wheel to mach interior orange from DSVCustoms
* Cargo net Done
* Cargo floor mat
* Door sill decals. Done
* Flor mats, black with Camaro logo Done

IMPROVING the CAR :
* Quad Rear Diffuser and tips.Donehttp://www.camaro5.com/forums/showthread.php?t=121453]
* Adding HUD to the 2010 Camaro Donehttp://www.camaro5.com/forums/showthread.php?t=93729
* New Suspension parts for the front end to take up the room in the strut.
* Add red LED's to my Homelink. Done see post 61
* Put ABL on the Dash: Done http://www.camaro5.com/forums/showthread.php?t=35631
* MSD wires for the LS3 part # 32829 Done
* Separation Of the Brake/Clutch Fluid reservoir. Part # 92065790 Done http://www.camaro5.com/forums/showthread.php?t=31901

[slick rick]

Got any pictures?

[2SSRS]

Originally Posted by slick rick

Got any pictures?

What do you want pic of.

[SSRS2010]

Originally Posted by 2SSRS

Got my car on 6/2/09 after a long hold in QC and this is what i will do to the car.
Car is a.
2SS IOM paint and white rally stripes with orange two tone INT and an LS3 m6 Trans


PERFORMANCE:

* ARH or LG Super Pro headers.
* New exhaust: Dont know the one i want at this time.
* CAI From Vararam, In the works I will doing some testing for them,
* Tune: from some one that know something,
* Short throw shifter: See this Thread,http://www.camaro5.com/forums/showthread.php?t=26472
*Wheels: will mod the car so i can put 335/30/20 on 20x11.5 rims and up to 305/35/20 in the front on some 20x10.5.
* Adjustable Coilover : working on it
* Suspension: will see whos soon.
* Big CI Engine: 650RWHP Or more. next year

EXTERIOR:

* Gm aftermarket grill
* some kind of front spoiler and may be ground Affix
* Add SS decal under Camaro badge on fender. Done
* Add Vent decal on the side.Done
* Add decal on the Engine cover.Done
* Add decal on the wheels. Done
* Tint all 5 Windows. Done

INTERIOR:

* Steering wheel to mach interior orange from DSVCustoms
* Cargo net
* Cargo floor mat
* Door sill decals.Done
* Flor mats, black with Camaro logo

Like your todo list

[Ject]

Pictures of the 'DONE' stuff ?

[2SSRS]

Yes, I do and this is it.

[56chevyfan]

i ordered mine Jan 5 - and picked it up June 18th now that was a long wait - but SO worth it - black SS/RS with a sunroof and i even got a car cover , not worth the $ 350 but it looks real cool on the car - red with the black stripes and CAMARO on the sides

[speedster]

Nice Pics.

Glad you have been having so much fun with your car. You can put up to 315's on the car, but to go to 335's and do it correctly, it will probably cost you another $5K to mini-tub it.

[2SSRS]

Originally Posted by speedster

Nice Pics.

Glad you have been having so much fun with your car. You can put up to 315's on the car, but to go to 335's and do it correctly, it will probably cost you another $5K to mini-tub it.

I did my own on my 66 nova and this is almost the same, Have a plasma cuter and mig welder As for metal that is only $10, Its the time but will start soon and take lots of pic for all to see.

[2SSRS]

So after looking at "Hylton" thread i see that he removed the chrome Basel on the rear tail lights so yesterday i removed one to see if i like it, And i did, So i removed all of them ( PS See pic) and now want to redo the tail light in LED, Dos any one have take off tail light from an SS that changed them to RS, I need a set to cut up and make LED boards Up So if you do send me a PM.

[RetroDude]

In case anyone hasn't mentioned it as yet, your "SS" logo in the front 1/4 panel is upside down!

[Bbrock25]

Originally Posted by RetroDude

In case anyone hasn't mentioned it as yet, your "SS" logo in the front 1/4 panel is upside down!

Yea I'd have to agree

[TAG UR IT]

^Yep. Dude...I'm sorry. It's tough to tell sometimes, but they are right. Upside down. Flip flop it and all will be good!

[2SSRS]

Originally Posted by TAG UR IT

^Yep. Dude...I'm sorry. It's tough to tell sometimes, but they are right. Upside down. Flip flop it and all will be good!

Thanks will fix it
Now for new bizz, My car was a test pig for K&N this week, Drove to K&N on Monday and got there in the am to drop the car for a CAI to be test fit on the car and went back on Thursday to get the car back at that time i got to see the CAI it looks like all but two of the ram air intakes and if a dry filter so now problems for the MAF, Got a hat and a t-shirt and a new filter for the GM air box and will get a CAI 1 month before it is realest to the world so maybe in 2-3 months, I asked for a dyno of my car and got it not that good but i have an idea why that is. (long story 87 gas not 91, CA/AZ no 93) So for the good of CAMARO5 i am working on rims and a lot more i Will update this as i get more done to the car.

I will post some pics of the dyno and filter.

[2SSRS]

So today i start the redesign on the Clutch Fluid reservoir to fix the mix of brake and Clutch Fluid, I am not to happy to see this in our camaro's and not on any C6 out there or G8's, So i want down to my GM parts Dealer and did some home work, We looked at C6 and G8 put the problem with them is that you can not buy the reservoir by its self only with the Clutch master slender, So he is also a FORD dealer and we found a Clutch Fluid reservoir from a F-150 or F-250 that had the mounting hardware to mount on the car but it WAS A FORD (And it was also $65 that is to mach on that part) And this is a Camaro, Than i said how a about a GTO so he looks it up and it has the reservoir by its self so he looks up the $ for the part and it only list's for $19.33 for one and i get a better price, Lats say lower than $15.00 for me, And because this is a GTO the part is a Holden LTD part and maid in Germany, This will fix two things.

#1 No more mixing of brake and Clutch Fluid, And i will go to Dot 4 on the Clutch Fluid.

#2 no way to contaminant you brake Fluid from you Clutch Fluid, And than you do not have to pay to rebuild you ABS in 3-5 years If you drive it as a DD

So her is a pic of the reservoir,

[2SSRS]

So i did it in less than 1 1/2 hour had to get a hose clamp and a rubber plug for the brake master cylinder and 2 self tapping metal screws for the new reservoir.

[2SSRS]

So after doing this to my car i test drove it to Las Vegas and back home that was 260 Mi and no more leak on top of the Brake Fluid reservoir so i think that i fixed it.

[2SSRS]

See this for new upper 1/2 of hurst shifter.
http://www.camaro5.com/forums/showth...d=1#post812293

[2SSRS]

As of today i got the go ahead to say that i will be 1 of 6 test mulls for Vararam, I am out in AZ, So will update as soon as i have the unit some time next week, We will post on the install and how easy it is and the improvement to the car maybe some new dyno's will see.

[2SSRS]

Her you go this is a link to my Vararam test on the new CAI.
http://www.camaro5.com/forums/showth...431#post857431

Some new info for you guys the 2 units are not the same in some ways as of 11-16-09 it looks as the non tune unit will be 2.5-2.75" tall filter on a small 92 MM diameter TBS mating point, And the tune unit is for a large C.I. motor at least 427 and up as it can flow 2000 CFM and more it comes with a 3" filter and a 102 MM diameter TBS mating point and more to come soon.

[2SSRS]

So this week i put on my Xa coilovers and this is some of the pics of that work and of the car after the alignment,

[2SSRS]

Got my ARH back from the coating shop, I will put it on in 30 days or so, I have to complete my testing for Vararam first.

But i hope you like the pics.



And at the same time put on the MSD wires.




Hope you like it.

[2SSRS]

So her is some of the pics from how to do the ABL lighting in the dash.

[Rygain]

whohooo

Great job dude !!

[2SSRS]

Originally Posted by Rygain

whohooo

Great job dude !!

Congrats you will love your Camaro send me pic after you get it.