Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Anthony @ LG Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics

Camaro ZL1 Forum - ZL1 Specific Topics Camaro ZL1 specific topics

Reply
 
Thread Tools
Old 12-09-2014, 03:27 PM   #1
Six.Two SC
 
Drives: 2014 Ashen Grey Camaro ZL1
Join Date: Mar 2014
Location: Pasadena, CA
Posts: 169
2014 ZL1 front license plate mount(no drilling)???

I thought I read somewhere the 2014's are different; that they require no drilling with the factory mount? Is this true? I can't find the mount that came with my car.
__________________
2014 Ashen Grey Metallic ZL1
M6
Rotofab CAI
Six.Two SC is offline   Reply With Quote
Old 12-09-2014, 04:44 PM   #2
nivek
 
Drives: 2015 ZL1 Black #100
Join Date: Oct 2014
Location: The Colony, TX
Posts: 19
You have to drill. The mount for my 2015 is secured to the bumper. The package came with 4 screws and 2 rivets. I have not attached mine. I was looking into a different option so that I do not have to damage my bumper.
nivek is offline   Reply With Quote
Old 12-09-2014, 05:12 PM   #3
lbls1

 
lbls1's Avatar
 
Drives: 2002 Camaro SS SOM; 2009 Malibu LT
Join Date: Dec 2010
Location: Queens, NY
Posts: 1,896
Its the same as the previous years; The dealer mounted bracket will require drilling through the cover. Do a search on this site for a few non-drilling bracket alternatives.
__________________
'02 CAMARO SS SOM; 5.7L LS1/FLS6B
'08 TBSS AWD Black Granite Metallic
'09 Malibu LT Dark Gray Metallic

'14 CAMARO ZL1 Blue Ray Metallic
lbls1 is offline   Reply With Quote
Old 12-09-2014, 05:53 PM   #4
Stephen12ZL1

 
Stephen12ZL1's Avatar
 
Drives: 2012 ZL1
Join Date: May 2012
Location: Mechanicsville VA
Posts: 2,210
no drill brackets do exist. Jacfab makes them. I use it and it works great.
__________________
#917 A6. 10.52@131.6 1.55 60' (608/620) 2:13 VIR full. ADM race CAI, ATI/Lingenfelter balancer (10" ring), 90mm TB, ID850s,Rotofab/Lingenfelter intercooler reservoir, Cooler Logic HX, Texas Speed 1 7/8" headers(no cats). M/T 305/35-18 drag radials & M&H 28x4.5" bias skinnies. Toyo Proxes R888 285/35-20, Hawk DTC 70/60, 8.66" ring (508/540). Tuning by Frost at Performance Autosport in Richmond, VA (804) 358-2505
Stephen12ZL1 is offline   Reply With Quote
Old 12-09-2014, 06:29 PM   #5
big dave
 
Drives: '13 BRM ZL1
Join Date: Aug 2009
Location: Maryland
Posts: 349
Quote:
Originally Posted by Stephen12ZL1 View Post
no drill brackets do exist. Jacfab makes them. I use it and it works great.
Yeah, but yours only works on 10 second cars!! lol!
__________________
'13 ZL1 BRM A6. 11.591 factory stock! Best stock mph 121.8.

http://youtu.be/yggIA3C_kkA 2014... back to stock

http://youtu.be/spQLaTWbThs 2013... stock & RotoFab



'94 Z28 A4. 13.64 @ 100.1 stock. 11.71 @ 117 h/c

'99 SS M6. 13.28 @ 105 stock. 12.02 @ 116.5 bolt-ons on street tires. Full weight. New combo 10.94 @ 126.9 n/a full weight on et streets. .http://youtu.be/BCJNFJrp2lg
big dave is offline   Reply With Quote
Old 12-10-2014, 01:33 AM   #6
GOAT
DiabloZL1
 
Drives: 14 ZL1
Join Date: Jan 2014
Location: CHARLESTON, SC
Posts: 32
Quote:
Originally Posted by Six.Two SC View Post
I thought I read somewhere the 2014's are different; that they require no drilling with the factory mount? Is this true? I can't find the mount that came with my car.
Put mine on the other day. JAC FAB is a great setup if you don't want to drill.
Attached Images
 
GOAT is offline   Reply With Quote
Old 12-10-2014, 09:22 AM   #7
lbls1

 
lbls1's Avatar
 
Drives: 2002 Camaro SS SOM; 2009 Malibu LT
Join Date: Dec 2010
Location: Queens, NY
Posts: 1,896
JacFab ftw
Attached Images
 
__________________
'02 CAMARO SS SOM; 5.7L LS1/FLS6B
'08 TBSS AWD Black Granite Metallic
'09 Malibu LT Dark Gray Metallic

'14 CAMARO ZL1 Blue Ray Metallic
lbls1 is offline   Reply With Quote
Old 12-12-2014, 01:08 PM   #8
Outwestjim
 
Outwestjim's Avatar
 
Drives: 2013 ZL1 Convertible
Join Date: Aug 2013
Location: Utah
Posts: 6
Hello,
I have the JacFab mount from my '13 ZL1 listed on ebay
Worked great, removed it before the car went back to GM
It's the angled version, comes with all hardware and instructions
Outwestjim is offline   Reply With Quote
Old 12-12-2014, 01:12 PM   #9
Six.Two SC
 
Drives: 2014 Ashen Grey Camaro ZL1
Join Date: Mar 2014
Location: Pasadena, CA
Posts: 169
Quote:
Originally Posted by Outwestjim View Post
Hello,
I have the JacFab mount from my '13 ZL1 listed on ebay
Worked great, removed it before the car went back to GM
It's the angled version, comes with all hardware and instructions
Awesome. I'll bid on it at the end.
__________________
2014 Ashen Grey Metallic ZL1
M6
Rotofab CAI
Six.Two SC is offline   Reply With Quote
Old 12-12-2014, 02:50 PM   #10
jamekitz
 
Drives: 2014 Camaro ZL1 Convertible
Join Date: Nov 2013
Location: Windsor, On
Posts: 53
I made a license plate bracket out of flat stock using an instruction I found on this site. No drilling required. It mounts to existing threaded holes near the lower radiator. Took a little bit of elbow grease to do, but the look is amazing and I would do it again if I were to purchase another ZL1.

I posted this when I did it, but this was before I was informed I still had the spacers installed on my front springs.

http://www.camaro5.com/forums/showthread.php?t=352627
Attached Images
 
jamekitz is offline   Reply With Quote
Old 12-12-2014, 10:09 PM   #11
isthunidal
 
Drives: bmw
Join Date: Dec 2014
Location: x5
Posts: 8
The dealer mounted bracket will require drilling through the cover.
isthunidal is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.