|07-28-2013, 11:18 PM||#1|
Drives: '12 2LT Convertible
Join Date: Mar 2012
Location: Belmont, California
Received my Brembo take offs...
I finally had time to unpack, inspect and clean them.
The person I bought them from painted them red. Unfortunately the piston and dust boot were not masked off before painting.
I cleaned them off pretty well using a kitchen sponge with Simple Green.
The pics show what I was able to remove so far.
I'm thinking I should follow the procedures in this thread to change out the dust boots and fully clean the piston tops before using the calipers.
Mods: GM Locking Gas Cap, RS License Plate Frame
Last edited by intensifi; 07-29-2013 at 03:07 PM.
|brembo brakes, caliper paint, dust boot|