Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis

Suspension / Brakes / Chassis All suspension, brakes and chassis discussions.

Reply
 
Thread Tools
Old 08-21-2013, 01:52 AM   #1
954camaro
 
Drives: Camaro SS/RS inferno red interior
Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 712
Help!!! Lowering spring question

My lower strut is not meeting we're my break caliper is and I am just stumped why its not aligning up right! I will try to upload pictures of what I mean.
__________________
VMAX TB, Borla Catback Exhaust, Cold Air Inductions CAI, Racing scoop,ZL1 grille, Nightowl JDP upgrade halo kit, interior lights, abl dash light pipes, VIS ams hood,Pfadt ZL-Spec sway bars, TSW Nurburgring F:20x9 R:20x10, Nitto Invo F:275/45 R:315/35, Spohn trailing arms, Toe rods, pfadt rear subframe bushing, ridetech level 2 coilovers, 3.91 GM differential, BMR diff bushings....more to follow
954camaro is offline   Reply With Quote
Old 08-21-2013, 02:00 AM   #2
954camaro
 
Drives: Camaro SS/RS inferno red interior
Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 712
__________________
VMAX TB, Borla Catback Exhaust, Cold Air Inductions CAI, Racing scoop,ZL1 grille, Nightowl JDP upgrade halo kit, interior lights, abl dash light pipes, VIS ams hood,Pfadt ZL-Spec sway bars, TSW Nurburgring F:20x9 R:20x10, Nitto Invo F:275/45 R:315/35, Spohn trailing arms, Toe rods, pfadt rear subframe bushing, ridetech level 2 coilovers, 3.91 GM differential, BMR diff bushings....more to follow
954camaro is offline   Reply With Quote
Old 08-21-2013, 02:03 AM   #3
954camaro
 
Drives: Camaro SS/RS inferno red interior
Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 712
__________________
VMAX TB, Borla Catback Exhaust, Cold Air Inductions CAI, Racing scoop,ZL1 grille, Nightowl JDP upgrade halo kit, interior lights, abl dash light pipes, VIS ams hood,Pfadt ZL-Spec sway bars, TSW Nurburgring F:20x9 R:20x10, Nitto Invo F:275/45 R:315/35, Spohn trailing arms, Toe rods, pfadt rear subframe bushing, ridetech level 2 coilovers, 3.91 GM differential, BMR diff bushings....more to follow
954camaro is offline   Reply With Quote
Old 08-21-2013, 03:00 AM   #4
954camaro
 
Drives: Camaro SS/RS inferno red interior
Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 712
I should say its my lower control arm that's not aligning right
Sorry
__________________
VMAX TB, Borla Catback Exhaust, Cold Air Inductions CAI, Racing scoop,ZL1 grille, Nightowl JDP upgrade halo kit, interior lights, abl dash light pipes, VIS ams hood,Pfadt ZL-Spec sway bars, TSW Nurburgring F:20x9 R:20x10, Nitto Invo F:275/45 R:315/35, Spohn trailing arms, Toe rods, pfadt rear subframe bushing, ridetech level 2 coilovers, 3.91 GM differential, BMR diff bushings....more to follow
954camaro is offline   Reply With Quote
Old 08-21-2013, 09:35 AM   #5
BMR Sales



 
Drives: 2010 2SS/RS R6P
Join Date: Sep 2009
Location: Seffner, FL
Posts: 2,493
That particular mounting point utilizes a rose joint in the spindle so it takes a little work and messing around to get it to line up.
__________________
Keith Kanyuh
5th Gen Camaro Suspension Specialist
keith@bmrsuspension.com
www.bmrsuspension.com
Like us on Facebook!
BMR Sales is offline   Reply With Quote
Old 08-21-2013, 12:33 PM   #6
PAUL SS
The Mark of Excellence
 
PAUL SS's Avatar
 
Drives: 2010 ABM 1SS RS LS3
Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,442
Just wiggle and diddle, it should go right in.
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, Vredestein
PAUL SS is offline   Reply With Quote
Old 08-21-2013, 02:28 PM   #7
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,069
Use a pry bar to get it moved where it needs to be.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 08-22-2013, 01:03 PM   #8
JDP Motorsports

 
JDP Motorsports's Avatar
 
Drives: 2011 JDP Track Spec Camaro
Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,239
You just need to pull the spindle out and move it into place. It can be a PITA sometime.

Kind regards,

Jordan Priestley
888.308.6007
__________________

Click HERE to send a PM | jordan@jdpmotorsports.com | www.jdpmotorsports.com | 888.308.6007
JDP Motorsports is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:34 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.