09-08-2013, 05:09 PM | #1 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,201
|
12.02 in the Heat
Took my car out to Texas Motorplex today to try out the new mods and tune changes. My car picked up almost 2 tenths and 3mph from the last time I was at the track in June when it was 2800 DA.
Today my best pass was 12.02 and it was mid day and 93 degrees and right at 3100DA. My goal was to crack 11.99 in the heat, but unfortunately the event I went to had a whole bunch of cars, so heat in the staging lanes was hard to avoid. Dragtimes DA calculator corrects this to a 11.57 at 0DA. Which is exactly what I predict. All I can do now is wait on Cold weather! I also have some tweaking to do on shift points after these changes. I believe it's got 11.90's capability even in the heat. It was shifting way early around 5700rpms. Ill work on tweaking the tune some more and try again this Friday at Test and Tune Night where it's not near as hard to get to the launch pad without letting ur car idle and get hot. My new Mod list that I just did was 2" Header swap from 1 7/8, Rhino Modified Intake, and 3.45 gears, and retune. |
09-08-2013, 05:17 PM | #2 |
Drives: 2010 Camaro SS Join Date: Apr 2013
Location: Longview, Tx
Posts: 797
|
Sounds to me like you will get there.... Work for me is picking up so I'm hoping to starting ordering my cam and cam kit in the next couple months. I'm going to do everything possible to have it ready to go by May for C5 Fest. Are you planning on going?
__________________
TSP 1 7/8 LT, ADM Race Cold Air w/ Race Scoop, GPI SS3 LS3 Cam, Powerbond UD, 3.91 Gears, GPI Posi Mod.
498RWHP/451RWTQ |
09-08-2013, 05:44 PM | #3 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,201
|
I'm not sure yet. I'm gonna be doing good to get to the tracks in cool weather. Got a baby about to be here around that time. So I may have to pick my poisons lol. I'm planning on going cammed and aftermarket heads by then but we will see.
|
09-08-2013, 05:47 PM | #4 |
Drives: 2010 Camaro SS Join Date: Apr 2013
Location: Longview, Tx
Posts: 797
|
Awesome!!! Hopefully you can still find a way to sneak out of the house for a few days. I messages Rhino earlier about a cam. Just waiting to hear back from him.
__________________
TSP 1 7/8 LT, ADM Race Cold Air w/ Race Scoop, GPI SS3 LS3 Cam, Powerbond UD, 3.91 Gears, GPI Posi Mod.
498RWHP/451RWTQ |
09-08-2013, 06:58 PM | #5 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
I'll try to upload the Video when I get home.
__________________
|
09-08-2013, 07:05 PM | #6 |
Drives: his wife crazy buying mods Join Date: May 2012
Location: Gilmer, TX
Posts: 1,342
|
Drag radials or stock tires?
Cold weather. haha. What is that?
__________________
Gone But Not Forgotten
|
09-08-2013, 07:07 PM | #7 |
|
Bam! What shifts were low? I'll shoot you a file over tonight!
|
09-08-2013, 07:26 PM | #8 | |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,201
|
Quote:
I think all of them need bumped 200rpm except the 1-2. I asked Andy to lower the 1st to 2nd shift myself Bc last time before the mods it was shifting long. in hind site, that 1-2 shift may be dead on with that last file you sent me. Probably just need to do the 2-3, and 3-4. And leave the 1-2 like it was. |
|
09-08-2013, 09:23 PM | #9 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
Had I been here I could have logged those passes for you.
What's your plan for friday night? |
09-08-2013, 09:58 PM | #10 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,201
|
|
09-08-2013, 09:58 PM | #11 | |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Sorry for the crappy vid lol
__________________
|
|
09-08-2013, 10:02 PM | #12 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,201
|
|
09-08-2013, 10:04 PM | #13 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
|
09-08-2013, 10:06 PM | #14 |
Drives: 2013 2SS/RS L99 Join Date: Oct 2012
Location: Denham Springs La.
Posts: 811
|
What mph?
__________________
2013 2SS/RS L99/A6 Crystal Red Metallic Tincoat 12.76@108.98mph Bone Stock
12.46@111.19mph with New Era CAI & U/D Pulley 12.12 @ 114.16 after Stainless Power headers and no tune yet on stock P-Zero's! 12.007@ 115.20 With 18" Drag Radials - 11.93 @115.19 Added a PTB 11.76 @116.59 With Yank SS3200 Converter - 11.63 @116.52 After PI and Tuning 11.44 @118.75 New Best 10.72 @127.93 after heads and Cam and Yank SS3600 |
|
|
Thread Tools | |
|
|