Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
GM Parts House
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 02-19-2010, 11:14 AM   #1
wishucould00
 
wishucould00's Avatar
 
Drives: 2010 Chevy Camaro SS/RS
Join Date: Jul 2009
Location: Oshkosh, WI
Posts: 114
Send a message via ICQ to wishucould00
Rear camber kit "is it me or....."

Im looking at dropping my camaro with the h&r drop springs and i was reading up on camber issues on the rear once you do the drop. I started searching for camber kits and the only one that i found is the Pedders kit which is around $200. Im not knocking Pedders but $200 for basically four bolts, that sounds really crazy. You would think that these companies that offer lowering coils would also offer a camber kit to correct the issue. Am i nuts for thinking the price is high or do you agree.
wishucould00 is offline   Reply With Quote
Old 02-19-2010, 11:18 AM   #2
Michael_Js
SoCal C5 Family Member
 
Michael_Js's Avatar
 
Drives: 2010 Camaro SS/RS - Black w/IOM; 6M
Join Date: Jul 2009
Location: San Diego, CA, USA
Posts: 5,306
Send a message via AIM to Michael_Js Send a message via MSN to Michael_Js
Yes, that's very high! From the threads I read at the time, it seemed like this wasn't necessary though - at least not the kit, that you could do it much cheaper yourself. I don't remember where those threads were though... :(
__________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~
2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; ********; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;
Michael_Js is offline   Reply With Quote
Old 02-19-2010, 11:26 AM   #3
wishucould00
 
wishucould00's Avatar
 
Drives: 2010 Chevy Camaro SS/RS
Join Date: Jul 2009
Location: Oshkosh, WI
Posts: 114
Send a message via ICQ to wishucould00
well if anyone can help me out with a cheaper way it would greatly be appreciated. Ive searched but i cant find anything.
wishucould00 is offline   Reply With Quote
Old 02-19-2010, 04:57 PM   #4
wishucould00
 
wishucould00's Avatar
 
Drives: 2010 Chevy Camaro SS/RS
Join Date: Jul 2009
Location: Oshkosh, WI
Posts: 114
Send a message via ICQ to wishucould00
wow no input of other ideas.
wishucould00 is offline   Reply With Quote
Old 02-19-2010, 04:59 PM   #5
will69camaro
 
will69camaro's Avatar
 
Drives: 1969 and 2010 Camaros
Join Date: Oct 2008
Location: Spring, TX
Posts: 514
Just wait a few weeks, deal with it being as close as you can get with factory alignment and pick up the BMR control arms that are adjustable when they become available. Probably cheaper than the bolts from Pedders...
__________________
Planetlsx.com online magazine rep
will69camaro is offline   Reply With Quote
Old 02-19-2010, 05:03 PM   #6
ZZcamaro


 
Drives: 2SS w/ ZZ427 Package!!
Join Date: Oct 2008
Location: Pittsburgh, PA
Posts: 2,703
Quote:
Originally Posted by will69camaro View Post
Just wait a few weeks, deal with it being as close as you can get with factory alignment and pick up the BMR control arms that are adjustable when they become available. Probably cheaper than the bolts from Pedders...
Exactly what I was thinking. The BMR adjustable pieces will solve your issues, and help your handling/traction at the same time.
ZZcamaro is offline   Reply With Quote
Old 02-19-2010, 06:21 PM   #7
jrpxxii


 
jrpxxii's Avatar
 
Drives: 2010 Camaro SS/RS 427ci
Join Date: Jul 2009
Location: Bowling Green, Ky
Posts: 3,366
I too think Pedders is high but you do recieve like 20 different alignment bolts. I am not sure what they are all for but there are alot of them in the kit. I am waiting on BMR.
jrpxxii is offline   Reply With Quote
Old 02-19-2010, 06:31 PM   #8
wishucould00
 
wishucould00's Avatar
 
Drives: 2010 Chevy Camaro SS/RS
Join Date: Jul 2009
Location: Oshkosh, WI
Posts: 114
Send a message via ICQ to wishucould00
any ideas when bmr will be releasing the control arms
wishucould00 is offline   Reply With Quote
Old 02-19-2010, 09:09 PM   #9
Rob@WretchedMS
 
Drives: His Wife Crazy
Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,787
There is a reason that Pedders bolts are the price they are, They are welded way better than the stock bolts are, and won't strip the eccentric like the stock ones do. They are stronger than stock bolts, they are plated unlike stock.

These bolts also allow much more adjustment than the stock parts.

The stock bolts are not cheap either, i had to buy a couple sets a while ago when we had a G8 in the shop with one of the eccentrics stripped.
Rob@WretchedMS is offline   Reply With Quote
Old 02-20-2010, 10:34 PM   #10
Mr Twisty


 
Mr Twisty's Avatar
 
Drives: the 2nd amendment home
Join Date: May 2008
Location: OK
Posts: 14,303
There's quite a bit of machining done to the bolts as well, they're not something you're gonna find at your local hardware store.
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."
-- Benjamin Franklin
Mr Twisty is offline   Reply With Quote
Old 02-21-2010, 02:06 PM   #11
Info@PeddersUSA.com

 
Info@PeddersUSA.com's Avatar
 
Drives: 5th Gen Rental
Join Date: Aug 2007
Location: New England
Posts: 1,904
There are 3 different kits to meet your needs:

1. Fronts to give you caster increases of 1 to 1.25 degrees plus infinite adjustability within its range plus a allen nut with lock tight to assist in more camber adjustability. It has a allen head to help keep the extension more controlled when adjusting cambers, to assist in reducing the contact possible on your wheels

2. Rears to give you a much greater range of adjustability for camber and toe, and significantly increases the strengh of the eccentrics to the custom made bolts.

3. Complete kit for front and rears

The eccentrics are laser cut not stamped, and everything is cad plated. Also all the kits include secondary locking nuts for added security.There is a rather serious amount of work that goes in to making these kits.









Thanks
mike
dms
Info@PeddersUSA.com is offline   Reply With Quote
Old 02-21-2010, 02:12 PM   #12
2010SLVRBULIT


 
2010SLVRBULIT's Avatar
 
Drives: G5(LLT) & C6(LS3)
Join Date: Apr 2009
Location: MARS
Posts: 7,473
Quote:
Originally Posted by Rob@WretchedMS View Post
There is a reason that Pedders bolts are the price they are, They are welded way better than the stock bolts are, and won't strip the eccentric like the stock ones do. They are stronger than stock bolts, they are plated unlike stock.

These bolts also allow much more adjustment than the stock parts.

The stock bolts are not cheap either, i had to buy a couple sets a while ago when we had a G8 in the shop with one of the eccentrics stripped.
Does this apply to the V6 drop springs as well?
2010SLVRBULIT is offline   Reply With Quote
Old 02-21-2010, 02:13 PM   #13
Info@PeddersUSA.com

 
Info@PeddersUSA.com's Avatar
 
Drives: 5th Gen Rental
Join Date: Aug 2007
Location: New England
Posts: 1,904
Quote:
Originally Posted by 2010SLVRBULIT View Post
Does this apply to the V6 drop springs as well?
Applies to all Camaros

mike
dms
Info@PeddersUSA.com is offline   Reply With Quote
Old 02-21-2010, 02:22 PM   #14
iBK3000
 
Drives: '04 Range Rover, Camaro 2SS 6MT
Join Date: Oct 2009
Location: Portland, OR
Posts: 213
Quote:
Originally Posted by dms View Post
There are 3 different kits to meet your needs:

1. Fronts to give you caster increases of 1 to 1.25 degrees plus infinite adjustability within its range plus a allen nut with lock tight to assist in more camber adjustability. It has a allen head to help keep the extension more controlled when adjusting cambers, to assist in reducing the contact possible on your wheels

2. Rears to give you a much greater range of adjustability for camber and toe, and significantly increases the strengh of the eccentrics to the custom made bolts.

3. Complete kit for front and rears

The eccentrics are laser cut not stamped, and everything is cad plated. Also all the kits include secondary locking nuts for added security.There is a rather serious amount of work that goes in to making these kits.









Thanks
mike
dms
__________________
CGM 2SS/RS 6SM . No muff.
iBK3000 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Camaro Brembo Big Brake Kit, Installed!! SS Mike Suspension / Brakes / Chassis 125 09-09-2010 01:34 PM
Setting up an IRS/Drivetrain for Drag Racing Kyle2k Suspension / Brakes / Chassis 44 06-05-2010 10:17 PM
ULTIMATE PERFORMANCE* TURBO Camaro SS -- 750hp Custom Single Turbo Kit (T04Z) Ultimate Performance Forced Induction - V8 496 10-11-2009 02:29 PM
2010 Camaro Fog/DRL Light 5202 HID kits .... HID_Guy Exterior Parts & Accessories 1 09-07-2009 01:19 PM


All times are GMT -5. The time now is 01:30 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.