Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
BeckyD@RodgersChevrolet
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8

Forced Induction - V8 V8 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 10-02-2013, 05:38 PM   #1
Criag B
 
Criag B's Avatar
 
Drives: 2013 1LE
Join Date: May 2013
Location: NJ
Posts: 505
ECS = BIG POWER

I just got back from ECS and getting off their dyno. We made 741 with 10.8 lbs. of boost and 678 ft lbs on Meth. Car still has the restrictor plate in it. Doug said it would have made over 800 with the plate removed. I'm happy with the 741 @ at the moment . This was done with their base kit and meth, med. size cam and Mast heads. Big thanks to the guys over @ East Coast Supercharging
Criag B is offline   Reply With Quote
Old 10-02-2013, 05:51 PM   #2
blake2010ss

 
blake2010ss's Avatar
 
Drives: 2010 Camaro 2ss/rs
Join Date: Oct 2009
Location: stone mountain, GA
Posts: 1,800
Send a message via AIM to blake2010ss Send a message via MSN to blake2010ss
Very nice! One question... what is the restrictor plate? This is the kit I am going to buy soon and curious of this.
__________________
2010 Camaro 2SS/RS LS3
678whp/630wtq
Motor work/NA Tune by Spartan Performance
Boost/Tune by Florida Speed and Power

ECS, Meth, Cammed, Suspenion
blake2010ss is online now   Reply With Quote
Old 10-02-2013, 06:12 PM   #3
Criag B
 
Criag B's Avatar
 
Drives: 2013 1LE
Join Date: May 2013
Location: NJ
Posts: 505
Quote:
Originally Posted by blake2010ss View Post
Very nice! One question... what is the restrictor plate? This is the kit I am going to buy soon and curious of this.
It cuts down the air flow to the S/C.
Criag B is offline   Reply With Quote
Old 10-02-2013, 06:46 PM   #4
94guy

 
94guy's Avatar
 
Drives: 99 Camaro; 2010 Camaro 2SS/RS
Join Date: Nov 2009
Location: louisiana
Posts: 1,435
Quote:
Originally Posted by Criag B View Post
I just got back from ECS and getting off their dyno. We made 741 with 10.8 lbs. of boost and 678 ft lbs on Meth. Car still has the restrictor plate in it. Doug said it would have made over 800 with the plate removed. I'm happy with the 741 @ at the moment . This was done with their base kit and meth, med. size cam and Mast heads. Big thanks to the guys over @ East Coast Supercharging
when will you make it to the track?
__________________
10.21@138
RWHP JRE TUNING Whipple supercharged
94guy is online now   Reply With Quote
Old 10-02-2013, 06:57 PM   #5
Criag B
 
Criag B's Avatar
 
Drives: 2013 1LE
Join Date: May 2013
Location: NJ
Posts: 505
Quote:
Originally Posted by 94guy View Post
when will you make it to the track?
Soon, I have a fresh set of M&H drag radials waiting.
Criag B is offline   Reply With Quote
Old 10-02-2013, 07:51 PM   #6
TornadoSS
WICKDSS
 
TornadoSS's Avatar
 
Drives: 2011 1SS/RS IOM LS3
Join Date: May 2010
Location: Wichita, Kansas
Posts: 1,103
Awesome numbers! What's the pulley combination? I'm at 9 psi with a cam, 91 oct and got to 636rwhp 581rwtq Gotta love these ECS KITS! I'm researching the meth kits now.
__________________
2011 IOM SS/RS, M6. Look up our all generation Camaro club website at Heartland Camaros
Gforce Engineering Drivetrain, ECS 1500 Supercharger, TSP Cam, Alky Controls Meth single nozzle. 91 octane, 698 RWHP 625 rwtq. 4200#+, Tuned by Justin "Justune" Kalwei
11.57 @ 126.8 mph with a crappy 1.80 60'.....still learning to drive....M&H DR's and skinnies on 17" Welds.
TornadoSS is offline   Reply With Quote
Old 10-02-2013, 07:57 PM   #7
Criag B
 
Criag B's Avatar
 
Drives: 2013 1LE
Join Date: May 2013
Location: NJ
Posts: 505
Quote:
Originally Posted by TornadoSS View Post
Awesome numbers! What's the pulley combination? I'm at 9 psi with a cam, 91 oct and got to 636rwhp 581rwtq Gotta love these ECS KITS! I'm researching the meth kits now.
Don't quote me, but I think the Pulley is (3.33")
Criag B is offline   Reply With Quote
Old 10-02-2013, 10:10 PM   #8
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 12,021
Quote:
Originally Posted by Criag B View Post
Soon, I have a fresh set of M&H drag radials waiting.
We have a 10 car private rental on Friday Oct 18th. Let me know if you want in.
Supercharged SS is offline   Reply With Quote
Old 10-02-2013, 10:13 PM   #9
Bo White
Account Suspended
 
Drives: 2010 Summit White 1SS
Join Date: Feb 2012
Location: Vance Alabama
Posts: 2,418
I thought the 3.3 pulley was 9lbs.
Bo White is offline   Reply With Quote
Old 10-03-2013, 04:36 AM   #10
Criag B
 
Criag B's Avatar
 
Drives: 2013 1LE
Join Date: May 2013
Location: NJ
Posts: 505
Quote:
Originally Posted by Supercharged SS View Post
We have a 10 car private rental on Friday Oct 18th. Let me know if you want in.
What track? Thanks.
Criag B is offline   Reply With Quote
Old 10-03-2013, 05:27 AM   #11
grocerygetter
instigator
 
grocerygetter's Avatar
 
Drives: Black on black 2009 C6
Join Date: Jan 2010
Location: 72034
Posts: 3,967
3.33 on a novi 1500 is capable of 12-13 psi but the combo can determine that. The restrictor plate works awesome in the aspect that it limits the boost to around 10 but because it's pullIed like it is it builds boost faster acting more like a roots blower with the efficiency of a centri. For a street car, plate in. It can be opened up a bit for more boost.
__________________
-John S.

2014 GMC CC Z71, 2009 C6 vette
2010 Camaro 2ss/rs---SOLD 4/15/14
-654whp with a few cosmetic things, Pfadt suspension, Vortech, CircleD, GPI ss3 vvt bump stick, gears, stuff in between,18" TSW N'rings for drag duty, 20" Forgestar F14s for street.

Thanks to:
Tony@ dv8motoring
rhino@ Gwatney Chevrolet/GPI Jacksonville AR
TCAudio in Benton AR
grocerygetter is online now   Reply With Quote
Old 10-03-2013, 07:38 AM   #12
MANNYS2SS/RS

 
MANNYS2SS/RS's Avatar
 
Drives: 2010 Camaro 2SS/RS,LS3
Join Date: Oct 2010
Location: South Florida
Posts: 2,142
Congrat's
__________________

LS-3, ProCharger D1SC
665. rwhp /562. rwtq @ 9.3 psi
MANNYS2SS/RS is offline   Reply With Quote
Old 10-03-2013, 08:25 AM   #13
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 12,021
Quote:
Originally Posted by Criag B View Post
What track? Thanks.
Island Dragway, great meadows nj.
Supercharged SS is offline   Reply With Quote
Old 10-03-2013, 08:27 AM   #14
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 12,021
Rental:

http://www.camaro5.com/forums/showthread.php?t=318230
Supercharged SS is offline   Reply With Quote
Old 10-03-2013, 09:36 AM   #15
East Coast Supercharging
 
East Coast Supercharging's Avatar
 
Drives: 8 second C5 Drag Car, C6 Road racer
Join Date: Sep 2009
Location: Cream Ridge, NJ 609-752-0321
Posts: 778
Quote:
Originally Posted by TornadoSS View Post
Awesome numbers! What's the pulley combination? I'm at 9 psi with a cam, 91 oct and got to 636rwhp 581rwtq Gotta love these ECS KITS! I'm researching the meth kits now.
Let us know if you would like us to give you a quote for our meth kit, naturally I'm biased, but I truly feel the ECS/Alky control kit is the best out there.
East Coast Supercharging is offline   Reply With Quote
Old 10-03-2013, 09:38 AM   #16
East Coast Supercharging
 
East Coast Supercharging's Avatar
 
Drives: 8 second C5 Drag Car, C6 Road racer
Join Date: Sep 2009
Location: Cream Ridge, NJ 609-752-0321
Posts: 778
Quote:
Originally Posted by Criag B View Post
I just got back from ECS and getting off their dyno. We made 741 with 10.8 lbs. of boost and 678 ft lbs on Meth. Car still has the restrictor plate in it. Doug said it would have made over 800 with the plate removed. I'm happy with the 741 @ at the moment . This was done with their base kit and meth, med. size cam and Mast heads. Big thanks to the guys over @ East Coast Supercharging


Thanks Craig! Your car is a beast for sure, very nice ride.


If the Island rental doesn't work out for you, we have Atco rented on the 23rd, your welcome to come.
East Coast Supercharging is offline   Reply With Quote
Old 10-03-2013, 09:40 AM   #17
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 12,021
Quote:
Originally Posted by East Coast Supercharging View Post
Let us know if you would like us to give you a quote for our meth kit, naturally I'm biased, but I truly feel the ECS/Alky control kit is the bast out there.
It's not biased if it's true. I've never heard of one complaint or failure with as many of these meth kits being used.
Supercharged SS is offline   Reply With Quote
Old 10-03-2013, 09:45 AM   #18
East Coast Supercharging
 
East Coast Supercharging's Avatar
 
Drives: 8 second C5 Drag Car, C6 Road racer
Join Date: Sep 2009
Location: Cream Ridge, NJ 609-752-0321
Posts: 778
Quote:
Originally Posted by Supercharged SS View Post
It's not biased if it's true. I've never heard of one complaint or failure with as many of these meth kits being used.

As I have said before, meth injection is God's gift to high HP street cars!!

Good luck at Island, I love that track. (mainly for it's nostalgic feel to it, and it's where I took my first pass that hooked me!)
East Coast Supercharging is offline   Reply With Quote
Old 10-03-2013, 09:49 AM   #19
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 12,021
Quote:
Originally Posted by East Coast Supercharging View Post
As I have said before, meth injection is God's gift to high HP street cars!!

Good luck at Island, I love that track. (mainly for it's nostalgic feel to it, and it's where I took my first pass that hooked me!)
Thanks!!!


Nothing better than trying to slow down from 140 mph+ in 500'.


Let me know when you have a c7 supercharged kit please!

Plenty of room on the drivers side for you to fit it in there.

Got to think that a 1500, headers and a cai on drag radials on the A6 should be close to the 9's.
Supercharged SS is offline   Reply With Quote
Old 10-03-2013, 10:08 AM   #20
East Coast Supercharging
 
East Coast Supercharging's Avatar
 
Drives: 8 second C5 Drag Car, C6 Road racer
Join Date: Sep 2009
Location: Cream Ridge, NJ 609-752-0321
Posts: 778
Quote:
Originally Posted by Supercharged SS View Post
Thanks!!!


Nothing better than trying to slow down from 140 mph+ in 500'.


Let me know when you have a c7 supercharged kit please!

Plenty of room on the drivers side for you to fit it in there.

Got to think that a 1500, headers and a cai on drag radials on the A6 should be close to the 9's.


It's in the works, we might- big stretch on might though... but we might be testing it at our rental. I'll keep you posted.
East Coast Supercharging is offline   Reply With Quote
Old 10-03-2013, 10:15 AM   #21
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 12,021
Quote:
Originally Posted by East Coast Supercharging View Post
It's in the works, we might- big stretch on might though... but we might be testing it at our rental. I'll keep you posted.

Good deal and good luck!!! The 1500 would be perfect for this car.
Supercharged SS is offline   Reply With Quote
Old 10-03-2013, 06:20 PM   #22
VanquisherSS
Hasbin of Stock Bottom HP
 
Drives: CTS-V Coupe, 04 TT Viper
Join Date: May 2011
Location: NJ
Posts: 2,560
Nice bud. It'll make over 800 for sure without the plate. I made 844whp on the blower only on my old car. We put the plate back in made 750 then put a 100shot on it and made 900whp/810wtq
VanquisherSS is offline   Reply With Quote
Old 10-03-2013, 06:21 PM   #23
VanquisherSS
Hasbin of Stock Bottom HP
 
Drives: CTS-V Coupe, 04 TT Viper
Join Date: May 2011
Location: NJ
Posts: 2,560
Quote:
Originally Posted by Supercharged SS View Post



Good deal and good luck!!! The 1500 would be perfect for this car.
Did you get yours yet.
VanquisherSS is offline   Reply With Quote
Old 10-03-2013, 06:37 PM   #24
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 12,021
Quote:
Originally Posted by VanquisherSS View Post
Did you get yours yet.

Bitch please......


It's already at American Racing Headers so they can develop a C7 header back system.


I had it 36 hours. That's a record for not touching the car.
Attached Images
 
Supercharged SS is offline   Reply With Quote
Old 10-03-2013, 07:15 PM   #25
VanquisherSS
Hasbin of Stock Bottom HP
 
Drives: CTS-V Coupe, 04 TT Viper
Join Date: May 2011
Location: NJ
Posts: 2,560
Quote:
Originally Posted by Supercharged SS View Post
Bitch please......


It's already at American Racing Headers so they can develop a C7 header back system.


I had it 36 hours. That's a record for not touching the car.
Nice!! White looks awesome man and LOL well its gonna getting some bolt ons from ARH when its done? Then straight to the rollers I assume? I got my bike yesterday not too happy with my dealer experience but oh well. I got the first '14 Comp hitting the streets in the NE.
VanquisherSS is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.