Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
ADM PERFORMANCE
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals

Member Car Journals Want to keep a long term Camaro project journal to share with the community? Use this forum to create a single thread which you can update over time to document the progress.

Reply
 
Thread Tools
Old 07-13-2009, 10:36 PM   #1
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
Daddyo01545's 2SS/RS CGM M6 (Dyno Tuned)

Finally it is here and now we will begin to add some nice enhancements below.
  • Doug Thorley Shorty's - Installed
  • Borla Catback exhaust - sport type - Installed
  • Flat Black Painted tail light bezels - Installed
  • EBrake leather boot from DSV - Installed
  • Roto Fab custom engine cover - polished aluminum etched with Camaro & LS3 with carbon fiber plenum - Installed
  • Black Vinyl for Front and Rear Bowtie - Installed
  • Black Vinyl bowties on wheel caps - Installed
  • Cyber Grey License Plate Frames from TopFlightReproductions - Installed
  • 160 Deg Thermo - Installed
  • Dyno Tuned - DONE
  • Barton Short Throw Shifter - Installed
  • Cold Air Inductions CAI - DONE
  • Eibach pro suspension kit (lowered1") - DONE
  • JBA mid pipe w/high flow cats - DONE

Attached Images
   

Last edited by Daddyo01545; 11-28-2010 at 08:37 PM.
Daddyo01545 is offline   Reply With Quote
Old 07-17-2009, 06:31 PM   #2
CamaroSpike23
Mr. Nitpicky
 
CamaroSpike23's Avatar
 
Drives: anything I can get my hands on
Join Date: Sep 2006
Location: anywhere and everywhere
Posts: 22,930
Send a message via Yahoo to CamaroSpike23
cool. nice pics. I've been wanting to see the underside of the intake.

quick question. does the filter press in? or does the intake have a "surround" that holds it in? I noticed the 2 screws on either side. jw.
__________________
Never race anything you can't afford to light on fire and push off a cliff
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.

Quote:
Originally Posted by Bulldogwinters View Post
Read that link that Spike posted, it'll tell you everything you need to know.
Quote:
Originally Posted by WheelmanSS View Post
Post count is truly an accurate measure of how cool someone is on the Internet.
Quote:
Originally Posted by Greg Norris View Post
I piss excellence
and fart awesomeness
Quote:
Originally Posted by BowtieGuy View Post
Nobody makes CamaroSpike happy. You just disgust him a little less than other people.
"You can think I'm wrong, but that's no reason to quit thinking.”
Quote:
Originally Posted by Overflow View Post
But not all people were born awesome like you, Spike.
CamaroSpike23 is offline   Reply With Quote
Old 07-17-2009, 06:37 PM   #3
GMtothecore
"That Guy"
 
GMtothecore's Avatar
 
Drives: Camaro SS...........what else?
Join Date: Apr 2009
Location: OOOOOOOklahoma where the wind comes sweepin' down the plains.
Posts: 2,402
That intake goes to the mail slot?
__________________
GMtothecore is offline   Reply With Quote
Old 07-17-2009, 07:29 PM   #4
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
Quote:
Originally Posted by CamaroSpike23 View Post
cool. nice pics. I've been wanting to see the underside of the intake.

quick question. does the filter press in? or does the intake have a "surround" that holds it in? I noticed the 2 screws on either side. jw.
There is a "surround" bracket which is held by 4 screws that holds the filter in. It is very well made and sturdy.
Daddyo01545 is offline   Reply With Quote
Old 07-17-2009, 07:30 PM   #5
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
Quote:
Originally Posted by GMtothecore View Post
That intake goes to the mail slot?
It goes in over the radiator...see the link below
http://i2.photobucket.com/albums/y18...esignII004.jpg
Daddyo01545 is offline   Reply With Quote
Old 07-17-2009, 10:13 PM   #6
Flynnaz
Wicked Camaro
 
Flynnaz's Avatar
 
Drives: 2013 IOM 2SS/RS 1LE
Join Date: Apr 2009
Location: Tucson, AZ
Posts: 2,413
Send a message via MSN to Flynnaz Send a message via Yahoo to Flynnaz Send a message via Skype™ to Flynnaz
How much did the intake run, and what type of filter does it use? Can I buy the filter at most auto part stores?
__________________

Mods so far: Ported Throttle Body/Airiad CAI/ Elite Oil Catch Can/Clutch reservoir separation Mod/Subthump/Foot well Lighting/RBG LED behind Grill/LED under Polished Strut Tower Brace/Vinyl Gill Blackouts/Skip Shift Eliminator/DYI Mild to Wild/AAC Plasma DRL's with Plug n Play harness/Blue LED Dome light, white LED trunk and Licence plate light/tinted windows/blacked out side markers and tail lights/Headlight Armor/Clear Bra/splash guards/Black Gorilla Locking Lug Nuts/Plastidipped Bow Ties and rear Tail Light Bezels/Emblem Pros Black Camaro letters/diodedynamics lighted cup holder (SS)
Flynnaz is offline   Reply With Quote
Old 07-17-2009, 10:20 PM   #7
tjbusa
Serious Sleeper
 
tjbusa's Avatar
 
Drives: 2010 CGM 2SS/RS M6
Join Date: Nov 2008
Location: Lexington,SC
Posts: 3,171
Cool stuff
tjbusa is offline   Reply With Quote
Old 07-18-2009, 12:04 PM   #8
Crowley
Okie doke
 
Crowley's Avatar
 
Drives: 2012 GT500
Join Date: Sep 2008
Location: McKinney Texas
Posts: 3,770
does new era offer replacement filters as well? Would be nice for when you are cleaning one

Crowley
__________________
Crowley is offline   Reply With Quote
Old 07-18-2009, 12:08 PM   #9
Croathlete
Danny
 
Croathlete's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Nov 2007
Location: NYC
Posts: 1,657
Send a message via AIM to Croathlete
Quote:
Originally Posted by Daddyo01545 View Post
It goes in over the radiator...see the link below
http://i2.photobucket.com/albums/y18...esignII004.jpg
I wonder how much air is actually coming up over the radiator. Do they have any CFM specs?
__________________
2SS/RS CGM with black rally stripes

DON_RAFA describing my Noweeds cutouts - "Very Strong. When I couldn't see you I still heard you. Sounds like your car is pissed at the world."

Please help me fight back by supporting me in the 2010 American Cancer Society's Relay for Life. Every little bit helps. Click here for more information. Thank you to those that have donated!
Croathlete is offline   Reply With Quote
Old 07-18-2009, 01:07 PM   #10
joerod97
Chevy Man
 
Drives: 2010 2ss -black/black
Join Date: Apr 2009
Location: Folsom,ca
Posts: 434
Yeah , Id like to see the cfm specs too. Also what kind of hp increase...cost,, what kind of replacement cartridge, is it washable/oil like k&n
joerod97 is offline   Reply With Quote
Old 07-18-2009, 02:26 PM   #11
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
Quote:
Originally Posted by joerod97 View Post
Yeah , Id like to see the cfm specs too. Also what kind of hp increase...cost,, what kind of replacement cartridge, is it washable/oil like k&n
All good questions...since it is not a daily driver I was not too concerned about a replacement yet. However, I will check it out in a couple of days and get back to all on this...I am sure we can get the replacement filter number from those guys. For Dyno numbers see their posting under Vendor Classifieds. Numbers are pretty impressive. I will be getting my own numbers once my car is delivered in the next week or so.
Daddyo01545 is offline   Reply With Quote
Old 07-18-2009, 08:51 PM   #12
camaros and vettes
Account Suspended
 
Drives: 2010 IBM Camaro 2008 Corvette
Join Date: Aug 2008
Location: Tiffin,Iowa
Posts: 561
so you got your already?? its not showing available on there website yet.
camaros and vettes is offline   Reply With Quote
Old 07-18-2009, 10:47 PM   #13
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
Quote:
Originally Posted by camaros and vettes View Post
so you got your already?? its not showing available on there website yet.
Yes, I got the very first one! Here is the thread to get one now....http://www.camaro5.com/forums/showthread.php?t=29550
Daddyo01545 is offline   Reply With Quote
Old 07-19-2009, 05:21 PM   #14
1sickta
 
Drives: 91 Camaro, 95 Trans am
Join Date: Jul 2009
Location: Barboursville Wv
Posts: 46
Any Chance to get a pic threw the grill so I can see if it will clear the heat exchanger for the tvs 1900?
1sickta is offline   Reply With Quote
Old 07-20-2009, 05:42 AM   #15
JDBeck23

 
Drives: 2010 Camaro, 2SS/RS
Join Date: May 2009
Location: King George, Va
Posts: 881
I thought the welds were supposed to be "cleaned up" a bit and the final product would be powder coated?? Looks identical to the prototype pics.
__________________

2010 2SS/RS CGM
American Racing Headers, Magnaflow axle back, Roto-Fab CAI, Audio Integrations Sub box, Alpine Type R 10, Alpine MRP-500 amp, Pro Clips iPhone Mount

Last edited by JDBeck23; 07-20-2009 at 05:54 AM.
JDBeck23 is offline   Reply With Quote
Old 07-20-2009, 05:51 AM   #16
TheNetGarage
We Sell Vinyl!
 
TheNetGarage's Avatar
 
Drives: 2010 Camaro
Join Date: Jun 2009
Location: New York
Posts: 272
Not only CFM specs, but how much heat does it pick up being that it is metal and it sits above the radiator. I am not sure, although I love ram air, I think a hood and intake package is in order by the looks of things.
TheNetGarage is offline   Reply With Quote
Old 07-20-2009, 01:43 PM   #17
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
Quote:
Originally Posted by JDBeck23 View Post
I thought the welds were supposed to be "cleaned up" a bit and the final product would be powder coated?? Looks identical to the prototype pics.
Yes, this is the RAW version. And it is identical to the prototype pics as in fact it is the very one depicted.
Daddyo01545 is offline   Reply With Quote
Old 07-20-2009, 07:05 PM   #18
JDBeck23

 
Drives: 2010 Camaro, 2SS/RS
Join Date: May 2009
Location: King George, Va
Posts: 881
gotcha
__________________

2010 2SS/RS CGM
American Racing Headers, Magnaflow axle back, Roto-Fab CAI, Audio Integrations Sub box, Alpine Type R 10, Alpine MRP-500 amp, Pro Clips iPhone Mount
JDBeck23 is offline   Reply With Quote
Old 07-22-2009, 10:26 PM   #19
1sickta
 
Drives: 91 Camaro, 95 Trans am
Join Date: Jul 2009
Location: Barboursville Wv
Posts: 46
I got one in today. After looking at it and seeing the pic of it mounted, I think it will work fine with the TVS 1900 blower. I will try and get you guys some IAT temps before and after. Keep in mind they will be higher temps then a NA motor but atleast we can see if their is a difference from the stock air box to the OTR setup. Hope to have some solid imput by this weekend.
1sickta is offline   Reply With Quote
Old 07-22-2009, 10:55 PM   #20
Massman151
Chevy Fanatic
 
Massman151's Avatar
 
Drives: 2010 RS/SS CAMARO RJT
Join Date: May 2009
Location: Massachusetts
Posts: 331
nice stuff, where did u order from
__________________
2010 2SS/RS L99 Camaro RJT, Ground Effects, Black Hockey Stripes, 21" Rims. - 2G1FK1EJ4A9108441


"Sam Witwicky: Fifty years from now, when you're looking back at your life, don't you want to be able to say you had the guts to get in the car?"

"Sam Witwicky: Um yeah, Satan's Camaro? It's stalking me!"
Massman151 is offline   Reply With Quote
Old 07-25-2009, 07:26 PM   #21
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
Quote:
Originally Posted by Massman151 View Post
nice stuff, where did u order from
Hey Got all the stuff from the classified section on this site, except the Jet and skip shift...both on ebay for cheep. I think I have spent around 2,500 total.
Daddyo01545 is offline   Reply With Quote
Old 07-31-2009, 12:33 PM   #22
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
Pictures tomorrow of the Black Bowtie on front and back. Also, planning to do wheels bowtie in black vinyl. Looks incredible and the installation was a snap. Total 10 minutes for a first timer. Flat black vinyl cost $4 and some change on ebay.
Daddyo01545 is offline   Reply With Quote
Old 07-31-2009, 01:19 PM   #23
SMGSS

 
SMGSS's Avatar
 
Drives: 00 SS, 67 SS
Join Date: Jun 2009
Location: Rochester, NY
Posts: 252
looking forward to some numbers for this beast :tup:
SMGSS is offline   Reply With Quote
Old 08-01-2009, 09:00 PM   #24
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
Updated with new pics
Daddyo01545 is offline   Reply With Quote
Old 08-02-2009, 10:30 PM   #25
Daddyo01545
New England C5 Member
 
Daddyo01545's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Apr 2009
Location: Shrewsbury, MA
Posts: 144
More Pics first post
Daddyo01545 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
"My" CGM 2ss/RS arrives.. mattdancer USA - California 43 08-06-2009 10:39 PM
2SS/RS CGM man... GTAHVIT Camaro Price | Ordering | Tracking | Dealers Discussions 36 08-01-2009 07:03 PM
2SS/RS CGM for sale - $5000 markup TripleB Camaro Price | Ordering | Tracking | Dealers Discussions 13 06-07-2009 05:21 AM
new pics from the Oshawa yard gazers-son Camaro Photos | Spyshots | Video | Media Gallery 168 04-29-2009 11:33 AM
3/26 Constraints CamaroScotty Camaro Price | Ordering | Tracking | Dealers Discussions 25 03-27-2009 11:03 AM


All times are GMT -5. The time now is 03:15 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.