Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
autoguy
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals

Member Car Journals Want to keep a long term Camaro project journal to share with the community? Use this forum to create a single thread which you can update over time to document the progress.

Reply
 
Thread Tools
Old 10-18-2013, 03:44 PM   #1
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
Arrow 2013 VR 1LE Livernois Build - "Scorpion" [COTW 2/17/14]

Hey everyone!

Thought I would get started on my build journal. I am starting with a Victory Red 1LE (2SS) I purchased on June 1, 2013. I've had to slightly delay my build out of a promise to my wife I would at least wait until the first of the year.

I've built many cars and a custom Jeep was my last project from 2012/13. I have started few changes with her blessing and I will document those over the next few days to catch up!

In the mean time here was the very first pic the day I took delivery.
Attached Images
 

Last edited by elarson5757; 01-30-2014 at 10:34 PM.
elarson5757 is offline   Reply With Quote
Old 10-18-2013, 03:46 PM   #2
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
Mod List

Held for a complete list of the car's modifications.


Exterior
Night Shades NS-1 Graphics in Matte Black and Carbon Fiber
Blacked out tail light trim rings
Technostalgia Tail Lights w/Big Worm Graphix Tint and RP100 Remote for Show Mode
Tinted Windows
Custom License Plate
Emblem Pros 1LE Emblems (Cowl and Deck Lid)
Custom Scorpion Supercharged Emblems
Halo Supercars Reverse Hood
Heritage Grill in Victory Red w/Custom Scorpion Badge
ZL-1 Rocker Panels (Victory Red)
ZL-1 Splash Guards
ACS Rear Decklid Liner in Carbon Fiber w/LED's
CFD Strut Tower Covers in Flat Black
ACS T-10 Hood Insert w/Window
Anvil Carbon Fiber Spoiler
Rear end blackout in matte black w/custom painted bow tie
VDI Verticle Doors
ACS Rear Quarter Functional Ports
Custom Oracle Bi-Xenon Headlights in Matte Black with ColorShift Halos
ACS T3/S Ports in Matte Black with Eagle LEDs as DRL's

Interior
AEM Boost/AFR Gauges in A-Piller Pod
Custom Red Gauge Faces
Custom embroidered Scorpion headrests
Custom Scorpion Badging
Custom painted interior trim including door panel inserts, speedo bezel, dash trim, full console, and seat sides all in black and Victory Red

Chassis/Drivetrain
Hurst Roll Control
BMR Trailing Arms w/bushings
DSS 1000HP Axles
BMR Toe Rods w/bushings
BMR Outer Control Arm Bushings
BMR Solid Subframe Bushings
Slotted and Drilled Rotors
Stainless Brake Lines
Hawk Race Pads
Motul 600 Fluid

Engine/Mechanical
2.9L Whipple Supercharger (polished) with 4" Pulley @ 9PSI
RotoFab Cold Air Intake
Livernois Stage 2 CNC Heads (upgraded head bolts and other related improvements)
Stage 2C-Hi Lift Livernois Custom Grind Cam
Livernois Dual Fuel Pump Setup
Kooks Long Tube Headers with Hi Flow Cats
Corsa Exhaust
MSD Plug Wires
McLeod RXT Twin Disk Clutch with Aluminum Flywheel
NGK Plugs
3 BAR MAP
160 Thermostat
Elite Catch Can
JDP Clutch Res Seperator


Engine Dress
RPI Victory Red Fuse Box Cover
CBM Chrome Coil Pack Covers
Showstopper Accessories Covers in Victory Red
Polished Billet Fluid Caps
Custom Painted Whipple Drive Shaft Cover
ACS Hood Liner for the T-10 Hood Insert

Last edited by elarson5757; 04-18-2014 at 09:30 PM.
elarson5757 is offline   Reply With Quote
Old 10-18-2013, 03:53 PM   #3
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
As of today my build had simply been cosmetic. So far I have completed:

Tinted Windows
ZL1 Rockers (top body color matched)
Nite Shades NS-1 Graphics
Blacked out front quarter CAMARO badging and added the SS
Blacked out front/rear bow ties
Removed SS from front grill
Emblem Pros 1LE hood badges
Emblem Pros 1LE trunk badge

Here it is today!! If someone would like a closer pic of something or feedback on a product as I go feel free to ask!
Attached Images
 
elarson5757 is offline   Reply With Quote
Old 10-18-2013, 03:59 PM   #4
Camaro_Corvette
36.833283,-76.021958
 
Camaro_Corvette's Avatar
 
Drives: Team 1LE
Join Date: Mar 2008
Location: Earth
Posts: 23,115
Looks great I need to get cracking on some mods.
__________________
I hate parking threads...
Camaro_Corvette is offline   Reply With Quote
Old 10-18-2013, 04:53 PM   #5
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
My new personalized license plate.

Forgot to note that I also painted the taillight surrounds as you can see in this pic!
Attached Images
 
elarson5757 is offline   Reply With Quote
Old 10-18-2013, 06:47 PM   #6
Sky
 
Sky's Avatar
 
Drives: 2011 Camaro 2LT RSky Edition
Join Date: Jan 2013
Location: Gainesville
Posts: 296
I like your choice in going with stripes instead of the blacked out hood. Looks very nice! Also the rockers are a great touch. I'm gonna be honest I haven't looked at the LE much, does it come stock with a CAI? If not I do say that gets my vote for next mod .
__________________
Sky is offline   Reply With Quote
Old 10-18-2013, 07:13 PM   #7
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
Ok just a couple more for catch up sake!

I added the Hurst roll control mounting the power and activation switches in easy reach. Also installed the ZL-1 splash guards.
Attached Images
 
elarson5757 is offline   Reply With Quote
Old 10-18-2013, 07:16 PM   #8
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
Lastly before I move on to this winters engine build up I got an Elite catch can, CAI, and a body match fuse box cover done.
Attached Images
 
elarson5757 is offline   Reply With Quote
Old 10-18-2013, 07:17 PM   #9
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
CAI
Attached Images
 
elarson5757 is offline   Reply With Quote
Old 10-18-2013, 07:19 PM   #10
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
Catch Can
Attached Images
 
elarson5757 is offline   Reply With Quote
Old 10-19-2013, 11:09 AM   #11
45TH RS
 
45TH RS's Avatar
 
Drives: 2012 45TH 2LT RS
Join Date: Jul 2012
Location: Michigan
Posts: 268
Nice job ... looks great!
__________________
45TH RS is offline   Reply With Quote
Old 10-19-2013, 08:55 PM   #12
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
OK..time to lay out the winter engine build up!! I have been working with Andy Ricketts over at Livernois in Metro Detroit. Frankly they are the ONLY company in Michigan I want doing this. They have an amazing reputation, unbelievable shop, and have hundreds, maybe thousands of cars under their belt.

Andy if you see this feel free to weigh in!!


Here is the plan. Clearly it will include before/after dyno testing and as many pics and videos as I can talk Andy and his team into taking! My intentions is to have them pick it up for these upgrades after the first of the year as the car will be stored anyway.

-Whipple 2.9 Supercharger
-RotoFab intake (have CAI now but Andy is suggesting better flow at these HP with RotoFab)
-Kooks Long Tube Headers w/Hi Flow Cats
-Corsa Exhaust
-Livernois 2C Hi Lift Blower Cam
-Livernois Stage 2 Heads
-McLeod RTX Twin Disk Clutch/Aluminum Flywheel
-Livernois Dual Fuel Pump Setup
-MSD Plug Wires
-NGK TR6 Plugs
-ARP Cam Bolts
-7.425" 5/16" Pushrods
-ARP Head Bolts
-LS9 Head Gasket
-ARP Flywheel bolts
-BMR Trailing Arms
-DSS 1000HP Axles
-Boost and AFR Gauges with A-Pillar Mount


Andy is expecting between 680-700HP to the rear wheels....should be a BEAST!!! In their opinion this is a safe and reliable combination all be it the top end of the range on the stock bottom end. If I get bored with this after time a forged bottom end from Livernois will be the next step along with bumping up the boost.

The wait for spring will kill me.... More to follow after the first of the year....

elarson5757 is offline   Reply With Quote
Old 10-28-2013, 08:45 PM   #13
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
Well based on recommendations from Livernois I have removed and sold the CAI intake temporarily putting it back to stock until the engine build. Their suggestion was based on what I was having done and the power I would be pushing I should go with a Roto-Fab unit.

The car itself has now been stored for winter so for the most part this thread will be pretty inactive until it comes out after the first of the year to go to Livernois.

The other major change was I just sold my Jeep. This move will free up future funds as well as smooth out my daily commute!
elarson5757 is offline   Reply With Quote
Old 10-28-2013, 09:09 PM   #14
PYROLYSIS
Remember the Charleston 9
 
PYROLYSIS's Avatar
 
Drives: 2004 KME PREDATOR, 2014 2SS/RS/1LE
Join Date: Nov 2008
Location: Summerv1LE SC
Posts: 4,570
Sweet build you've got going here, definitely jealous. Subscribed.
__________________
BRING BACK THE B4C POLICE CAMARO!
2002 V-6 5 speed rally red (current camaro) Also driven:1992 Z-28 305 auto Red w/ black stripes (anniversary), 2001 V-6 auto light pewter metallic,1991 RS V-6 auto Black
PYROLYSIS is offline   Reply With Quote
Old 10-29-2013, 08:17 AM   #15
SSTG

 
SSTG's Avatar
 
Drives: 2014 Z51 Corvette
Join Date: Apr 2011
Location: Ofallon, Mo.
Posts: 5,544
Car looks great!
I just purchased a 2014 1LE and love it.
Thanks for supporting us also!
SSTG is offline   Reply With Quote
Old 11-03-2013, 05:36 PM   #16
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
With the car in storage and me waiting for the engine build after the first of the year I will be starting to order up many of the planned cosmetic changes for installation when it comes out of storage in late March.

In preparation for that I have ordered the following today:

River City Reverse Hood Hinge Set
Technostalgia Tail Lights

Tomorrow I will be adding a set of Victory Red Ghosted Led Side Markers from AAC as well!
elarson5757 is offline   Reply With Quote
Old 11-03-2013, 06:17 PM   #17
zandron263

 
zandron263's Avatar
 
Drives: 2011 2LT RS IOM Convertible
Join Date: Dec 2010
Location: Buffalo, NY
Posts: 1,704
Your Camaro is going to be a beast when you get it out in the spring. Good luck with the build.
__________________
zandron263 is offline   Reply With Quote
Old 11-07-2013, 08:06 PM   #18
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
Just added a set of VDI vertical door hinges to the mix!!
elarson5757 is offline   Reply With Quote
Old 11-15-2013, 12:21 PM   #19
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
I really like the thought of several carbon fiber pieces on the car as long as I don't go overboard with changing everything back to fiber. With a months long waiting list I ordered a carbon fiber Anvil spoiler today. Any thoughts on what other exterior accent pierces would compliment it well without going overboard on the exterior? I do think t can't be the only piece of carbon fiber on the outside I'm just not sure yet what else to do.
elarson5757 is offline   Reply With Quote
Old 11-25-2013, 10:04 PM   #20
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
well...my car has been stored for three or four weeks and I thought I could do it. I don't want nor will I drive it thru the winter, however I have decided when I get the right day of weather I am moving it back to my home garage. At least I can get started on some of my planned mods working on it in the garage in my spare time.

Once its moved... I will get started with the Technostalgia tail lights first. Today I ordered some light tint for the tail lights and will see how I like it for a while in the spring before I decide on permanently tinting them. I also ordered the same tint for the reverse lights.

My AAC ghosted side markers will also be here this week, so those will go on as well as soon as I move the car back.

Also ready by the time I get it moved back will be the reverse hood setup and the VDI vertical doors. I will tackle the hood project myself and make arrangements (again based on weather) to have the VDI kit installed.

I ordered a rear blackout graphics set and intend to paint the rear bow-tie Victory Red when that's complete.

Maureen at Rodgers will be getting me a color matched heritage grill with NO bow-tie, etc.

Ordered RGB halos for the headlights, strips for the grill, and interior RGB floor well strips. I will also pickup a white led bar for the mail slot when they are back in stock.

Ordering a set of ACS T3/S composite ports with the 3 led light pods each to be painted Victory Red (or I may leave black I'm not sure yet) as well and installed. My intent is that the lights in the ports and the white led bar will all be my DRL's and the halos, grill, etc. will all be via a remote.

Lastly working with Ivan on a custom set of red gauge faces.

In the spirit of my passion for this car I gave the project a theme or name...Scorpion or Rise of the Scorpion for fun!

Sorry for the long update and thanks to those of you who have showed interest. I just wish I didn't have to deal with winter as I really want to be outside in the sun getting my hands dirty.

Last edited by elarson5757; 11-30-2013 at 08:31 PM.
elarson5757 is offline   Reply With Quote
Old 12-01-2013, 05:44 PM   #21
scottc
Central PA Camaro5 Club
 
scottc's Avatar
 
Drives: 13 HWSE, Veloster Turbo
Join Date: Apr 2009
Location: pa
Posts: 1,851
Nice job!
__________________
2013 HWSE, Veloster Turbo
scottc is offline   Reply With Quote
Old 12-01-2013, 06:44 PM   #22
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
Quote:
Originally Posted by scottc View Post
Nice job!
Thanks! Good looking car there in your signature! Looks very familiar!

Eric
elarson5757 is offline   Reply With Quote
Old 12-02-2013, 04:40 PM   #23
elarson5757
Obsessed and Loving It...
 
Drives: 2013 1LE-SS
Join Date: Jun 2013
Location: Saginaw, MI
Posts: 417
Finalized details with Andy over at Livernois today on the Engine build up! I can't wait. I will schedule with them near the end of the month to have the car picked up! Couple weeks later I should have the beast back!

I switched the Whipple over to the polished version as well as added gauges, etc.
elarson5757 is offline   Reply With Quote
Old 12-02-2013, 06:03 PM   #24
CamaroI


 
Drives: 2010 IOM Camaro
Join Date: Aug 2012
Location: DFW
Posts: 2,913
I would suggest going away from the reverse hood. You will thank me later on this one. The kit is flimsy and causes integrity issues with hood. You have to guide the hood down with each closing or you could destroy your fenders. While the hood is up you can actually wobble the hood from side to side. It the flemsy shocks they provide that cause the issue. Plus many who own have issue with passenger side closing correctly with hood lines. My fenders had to be modified to allow closer lines. As stated several others have had similiar issues.

Also to note...Will not work well with after market hoods unless revolution in style.

It does look great at shows, but just know the above. When I take anywhere Ie oil changes or dealer always list instructions on what to do or stay with the car. Other wise taking the chance of dinging up fenders.
CamaroI is offline   Reply With Quote
Old 12-02-2013, 06:09 PM   #25
CamaroI


 
Drives: 2010 IOM Camaro
Join Date: Aug 2012
Location: DFW
Posts: 2,913
As for black on the outside...I did stripe down along with Black Carbon Fiber mirrors. Less than 15 of these mirrors in production. Black Gills also

CamaroI is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:12 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.