Front and Rear Bow Ties - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ac223mal · 07-16-2009, 01:37 PM

Can anyone point me in the right direction? I am looking for replacement front and rear bow tie emblems. I have searched online and haven't been able to find them. I want to get a set to paint.

Thank you

PonyMan · 07-16-2009, 01:54 PM

Try GMpartsdirect.com, the front bowtie part#92194260. You can search the forum for the rear bowtie part number or call/email GMpartsdirect, they will tell you. Also, make sure they have them in, a lot of the exterior trim parts have been on backorder, unless you don't mind the wait!!!

Just asking, why don't you paint the ones on your car now?

ac223mal · 07-17-2009, 01:08 AM

Thanks PonyMan for the part number. I want to keep the original ones, just in case I decide to go back or I screw up the paint job.

19K3SS · 07-17-2009, 02:35 AM

you will not be able to reuse the rear bowtie. it goes on w/ 3M automotive tape. so once you remove it, the tape's done for.

your dealership's parts dept can order them, should run about $35 for the front, $15 for the rear... they are cheaper on gmpartsdirect.com, but their shipping fees then raise the cost higher than if you just get the parts thru your dealership.

jakemaxx · 07-17-2009, 02:58 AM

oh and the 3m tape is a B!tch to remove. i de badged my buddys sti and another's
silverado wow that sucks to do

ac223mal · 07-18-2009, 01:10 PM

Thanks guys, but why are there holes under the rear bow tie then, if it's stuck on by 3M tape?

VenomZ302 · 07-18-2009, 01:45 PM

Quote:

Originally Posted by ac223mal

Thanks guys, but why are there holes under the rear bow tie then, if it's stuck on by 3M tape?

Used for support and proper alignment, I believe.

Wikedwil · 07-18-2009, 05:35 PM

Quote:

Originally Posted by ac223mal

Can anyone point me in the right direction? I am looking for replacement front and rear bow tie emblems. I have searched online and haven't been able to find them. I want to get a set to paint.

Thank you

Try E-bay also.

SRFnSNO · 07-18-2009, 05:52 PM

Fishing line to get rear BowTie off.
And some new 3-M tape to put it back on.

GooGon for the stickey stuff, Clay bar the paint, new emblem then Wax.

fee5fofum · 07-18-2009, 08:39 PM

Try here :

http://www.defenderworx.com/index.ph...=28&Itemid=22#

ac223mal · 07-18-2009, 11:56 PM

I like those Defenderworx, but I would have to powder coat them for the color I like. Plus I can only imagine how expensive those would be. I tried ebay a couple of days ago and they only listed bow ties for other vehicles. I wonder if the tahoe bow ties will fit the camaro, as they have them listed on ebay?

Wikedwil · 07-19-2009, 11:29 AM

Quote:

Originally Posted by ac223mal

I like those Defenderworx, but I would have to powder coat them for the color I like. Plus I can only imagine how expensive those would be. I tried ebay a couple of days ago and they only listed bow ties for other vehicles. I wonder if the tahoe bow ties will fit the camaro, as they have them listed on ebay?

http://cgi.ebay.com/ebaymotors/2009-...O_W0QQitemZ230

Look here

*TAG UR IT* · 07-19-2009, 11:42 AM

Make sure to post pix of the newly painted bow ties.

faninc · 07-20-2009, 08:22 PM

Is there any chance of pulling or damaging the paint work when you remove an emblem with 3M tape? Are there tricks to removing? Hair dryer and fishing line is what I have read so far...

thanks
J

ac223mal · 07-20-2009, 10:12 PM

Faninc, I used the methods you listed above to remove the GM badge on the lower fender, hair dryer, fishing line, a little goo-gone washed off right away after the left over adhesive was gone. Then I went over with a clay bar and wax. Can't tell they were ever there.

Defenderworx · 07-21-2009, 03:55 PM

Bowties are available and we have the GM Official Licensing. Black or chrome are your choices, or if you want to order it raw and have it painted your own color, that is possible as well. Can be seen and purchased at http://stores.shop.ebay.com/Addicted-Auto-Accessories . Let us know how else we can help!

07-16-2009, 01:37 PM	#1
ac223mal Drives: 1997 30th SS/2010 SIM 2SS/RS Join Date: Nov 2008 Location: El Paso Posts: 395 View My Garage	Front and Rear Bow Ties Can anyone point me in the right direction? I am looking for replacement front and rear bow tie emblems. I have searched online and haven't been able to find them. I want to get a set to paint. Thank you __________________ Definitely Worth the Wait!

07-16-2009, 01:54 PM	#2
PonyMan Drives: 2009 C6 4lt Vert, 2011 Camaro Vert Join Date: Feb 2009 Location: Texas Posts: 877	Try GMpartsdirect.com, the front bowtie part#92194260. You can search the forum for the rear bowtie part number or call/email GMpartsdirect, they will tell you. Also, make sure they have them in, a lot of the exterior trim parts have been on backorder, unless you don't mind the wait!!! Just asking, why don't you paint the ones on your car now? __________________ Last edited by PonyMan; 07-17-2009 at 07:36 AM.

07-17-2009, 01:08 AM	#3
ac223mal Drives: 1997 30th SS/2010 SIM 2SS/RS Join Date: Nov 2008 Location: El Paso Posts: 395 View My Garage	Thanks PonyMan for the part number. I want to keep the original ones, just in case I decide to go back or I screw up the paint job. __________________ Definitely Worth the Wait!

07-17-2009, 02:35 AM	#4
19K3SS Drives: 2010 Camaro SS/RS Join Date: Feb 2009 Location: Lincoln Park, MI Posts: 237	you will not be able to reuse the rear bowtie. it goes on w/ 3M automotive tape. so once you remove it, the tape's done for. your dealership's parts dept can order them, should run about $35 for the front, $15 for the rear... they are cheaper on gmpartsdirect.com, but their shipping fees then raise the cost higher than if you just get the parts thru your dealership. __________________ Delivered 29May09: 2SS/RS Black w/ CGM Rally Stripes, Black Int, 6spd, 20" Polished VIN: 2G1FT1EW2A9108883

07-17-2009, 02:58 AM	#5
jakemaxx Drives: 1969 impala Join Date: Jan 2009 Location: stanwood, wa Posts: 236	oh and the 3m tape is a B!tch to remove. i de badged my buddys sti and another's silverado wow that sucks to do __________________ ordering 1SS, IOM, White Stripes, Sunroof, BA Sound System, RS Package, LS3 6M :5thgenvert:

07-18-2009, 01:10 PM	#6
ac223mal Drives: 1997 30th SS/2010 SIM 2SS/RS Join Date: Nov 2008 Location: El Paso Posts: 395 View My Garage	Thanks guys, but why are there holes under the rear bow tie then, if it's stuck on by 3M tape? __________________ Definitely Worth the Wait!

07-18-2009, 05:52 PM	#9
SRFnSNO Drives: Blown & Flamed Join Date: Feb 2009 Location: Jerzy Posts: 650 View My Garage	Fishing line to get rear BowTie off. And some new 3-M tape to put it back on. GooGon for the stickey stuff, Clay bar the paint, new emblem then Wax.

07-18-2009, 08:39 PM	#10
fee5fofum Drives: 2012 CTS-V Coupe & 2SS/RS Join Date: May 2009 Location: U.S.A. Posts: 379	Try here : http://www.defenderworx.com/index.ph...=28&Itemid=22#

07-18-2009, 11:56 PM	#11
ac223mal Drives: 1997 30th SS/2010 SIM 2SS/RS Join Date: Nov 2008 Location: El Paso Posts: 395 View My Garage	I like those Defenderworx, but I would have to powder coat them for the color I like. Plus I can only imagine how expensive those would be. I tried ebay a couple of days ago and they only listed bow ties for other vehicles. I wonder if the tahoe bow ties will fit the camaro, as they have them listed on ebay? __________________ Definitely Worth the Wait!

07-19-2009, 11:42 AM	#13
TAG UR IT www.Camaro5store.com Drives: THRSS #2 / CGM#1 Join Date: Jul 2006 Location: SA, Texas Posts: 24,575 View My Garage	Make sure to post pix of the newly painted bow ties. __________________

07-20-2009, 08:22 PM	#14
faninc Drives: 2010 Camaro RS in SIM Join Date: May 2009 Location: NJ Posts: 480 View My Garage	Is there any chance of pulling or damaging the paint work when you remove an emblem with 3M tape? Are there tricks to removing? Hair dryer and fishing line is what I have read so far... thanks J

07-20-2009, 10:12 PM	#15
ac223mal Drives: 1997 30th SS/2010 SIM 2SS/RS Join Date: Nov 2008 Location: El Paso Posts: 395 View My Garage	Faninc, I used the methods you listed above to remove the GM badge on the lower fender, hair dryer, fishing line, a little goo-gone washed off right away after the left over adhesive was gone. Then I went over with a clay bar and wax. Can't tell they were ever there. __________________ Definitely Worth the Wait!

07-21-2009, 03:55 PM	#16
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 517 View My Garage	Bowties are available and we have the GM Official Licensing. Black or chrome are your choices, or if you want to order it raw and have it painted your own color, that is possible as well. Can be seen and purchased at http://stores.shop.ebay.com/Addicted-Auto-Accessories . Let us know how else we can help! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V6 Camaro Performance Upgrades	rtcat600man	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	297	04-21-2013 05:38 PM
Help with pricing please	raif_21	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	11	06-26-2009 07:55 PM
No confirmation number?	jamesc1123	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	12	02-21-2009 08:49 PM
1SS standard equipment and options	Tran	Wiki	1	11-05-2008 02:34 PM
1LS standard equipment and options	Tran	Wiki	0	10-18-2008 08:13 PM