Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Dyno Max
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetics and Lighting Modification Discussions

Cosmetics and Lighting Modification Discussions External and Internal cosmetics modifications.

Reply
 
Thread Tools
Old 11-10-2013, 09:08 PM   #1
C-redfly

 
C-redfly's Avatar
 
Drives: 2012 completely Red Camaro
Join Date: Aug 2012
Location: Los Angeles
Posts: 874
2014 zl1 rear splash guards

Has anyone installed the '14s yet. They look awesome, the way they extend up to the quarter panel and rear bumper line oppose to the '12-13' which stop about 8 inches shorter

Sent from my SM-N900P using Tapatalk
C-redfly is offline   Reply With Quote
Old 11-11-2013, 05:21 AM   #2
Trunz150
 
Drives: 2014 2SS/RS Drop Top
Join Date: Sep 2013
Location: Long Island NY
Posts: 179
Bump would love to order these as well if they fit the 14
Trunz150 is offline   Reply With Quote
Old 11-11-2013, 12:14 PM   #3
C-redfly

 
C-redfly's Avatar
 
Drives: 2012 completely Red Camaro
Join Date: Aug 2012
Location: Los Angeles
Posts: 874
I'm gonna just order them. Hopefully they will be under $100 like the '12 zl1 splash guards. I'm going to the dealer today

Sent from my SM-N900P using Tapatalk
C-redfly is offline   Reply With Quote
Old 11-13-2013, 12:42 AM   #4
Egon
 
Egon's Avatar
 
Drives: 2014 2SS/RS 1LE
Join Date: May 2013
Location: San Diego
Posts: 366
I have them installed on my 2014 1LE. They fit without much issue but you will have to drill out a rivet along the bottom of the fender to remove an L shaped plastic bracket since the splash guard has this part integral to it. It fits between the fender and the inner wheel house quite nicely but I would recommend dismounting your tire before doing it. I did it with the tire on and there wasn't a lot of room to maneuver a wrench or ratchet. The screws also use torx bit which I already had from the RPI Designs front splash guard kit that fit without issue on the 2014. The part #’s are 22829497 for the left and 22829496 for the right, they are $57.18 each.
Attached Images
   
Egon is offline   Reply With Quote
Old 11-13-2013, 11:30 AM   #5
Buffman
1LE FTW
 
Buffman's Avatar
 
Drives: 2014 Camaro 2SS/RS 1LE Recaros NPP
Join Date: Sep 2013
Location: Mile High
Posts: 424
Sorry where did you buy them? These are the ZL1 2014 splash guards right?
Buffman is offline   Reply With Quote
Old 11-13-2013, 01:54 PM   #6
Egon
 
Egon's Avatar
 
Drives: 2014 2SS/RS 1LE
Join Date: May 2013
Location: San Diego
Posts: 366
Quote:
Originally Posted by Buffman View Post
Sorry where did you buy them? These are the ZL1 2014 splash guards right?
I just ordered them from my dealerships parts department, the part numbers are listed there if you want to order them yourself. (took us some time to find the part numbers initially)
Egon is offline   Reply With Quote
Old 11-13-2013, 02:00 PM   #7
C-redfly

 
C-redfly's Avatar
 
Drives: 2012 completely Red Camaro
Join Date: Aug 2012
Location: Los Angeles
Posts: 874
They look great. A lot better then the '12-'13. Thanks for the pics, install info, and part numbers.

Sent from my SM-N900P using Tapatalk
C-redfly is offline   Reply With Quote
Old 12-25-2013, 07:58 PM   #8
WiredAVS
 
WiredAVS's Avatar
 
Drives: '13 Cadillac ATS '14 Camaro 1LE
Join Date: Oct 2013
Location: Louisiana
Posts: 117
Quote:
Originally Posted by Egon View Post
…...already had from the RPI Designs front splash guard kit that fit without issue on the 2014.
I have the Factory zl1's on the rear of my 14 as well. How close is the material match on the RPI Designs compared to the OEM splash shields?
WiredAVS is offline   Reply With Quote
Old 12-25-2013, 11:15 PM   #9
Egon
 
Egon's Avatar
 
Drives: 2014 2SS/RS 1LE
Join Date: May 2013
Location: San Diego
Posts: 366
The RPI front guards are not the same material as the ZL1 factory parts. I don't have any really good pictures of them to show but they are a textured plastic on one side the other side is smooth. I just got the unpainted ones, they look fine but wont knock your socks off but they aren't really supposed to I think. If you want I will try to take some better pictures of them in the next few days.
Egon is offline   Reply With Quote
Old 12-26-2013, 02:28 PM   #10
olblue75

 
olblue75's Avatar
 
Drives: Inferno Orange 2SS/RS LS-3
Join Date: Dec 2009
Location: Qandahar, Afghanistan.
Posts: 983
Will they work on 10 to 13s??
olblue75 is offline   Reply With Quote
Old 12-27-2013, 12:23 PM   #11
jksynergy
 
jksynergy's Avatar
 
Drives: 11 SW SYNERGY SERIES/14 1SS 1LE
Join Date: May 2012
Location: Missouri
Posts: 703
Quote:
Originally Posted by olblue75 View Post
Will they work on 10 to 13s??
You'll have to get the 12-13 ZL1 guards, different rear bumper cover vs. the 14.

Thanks Egon, for part #'s, need to order these while the 1LE is being built so I can have them before the car arrives.
__________________
2011 Summit White Synergy Series Edition, the hot innocent woman named Ava that we show off around town, dressed in white complete with angel's wings.

2014 1SS 1LE. Bama, sporting Red Rock Metallic demon's horns, when we are ready to get naughty and open a can of whoopass!
jksynergy is offline   Reply With Quote
Old 01-13-2014, 01:54 PM   #12
RedRaider2014
 
RedRaider2014's Avatar
 
Drives: 2014 Camaro RS 2LT
Join Date: Dec 2013
Location: Waco, TX
Posts: 186
Are the RPI ones the same as the factory set?
RedRaider2014 is offline   Reply With Quote
Old 01-13-2014, 08:58 PM   #13
SGDM
Scorched Dark Earth
 
SGDM's Avatar
 
Drives: 2014 2SS RS 1LE
Join Date: Nov 2011
Location: North Texas
Posts: 868
I installed em on front and rear and it was easy. Got em from Showstopper for $189 shipped and worth every penny.
__________________


Who Dares...Wins

Vini, Vidi, Nates, Calce Concidi!
SGDM is offline   Reply With Quote
Old 01-14-2014, 08:28 AM   #14
Trex_47e
Horsepower Therapy
 
Trex_47e's Avatar
 
Drives: 2014 2SS, RS, 1LE, NPP with LSA
Join Date: Oct 2013
Location: Huntsville, AL
Posts: 271
Quote:
Originally Posted by SGDM View Post
I installed em on front and rear and it was easy. Got em from Showstopper for $189 shipped and worth every penny.
Agree!!
__________________

http://www.camaro5.com/forums/showthread.php?t=325814
Like my Facebook Page - Horsepower Therapy
Trex_47e is online now   Reply With Quote
Old 01-16-2014, 07:35 PM   #15
RedRaider2014
 
RedRaider2014's Avatar
 
Drives: 2014 Camaro RS 2LT
Join Date: Dec 2013
Location: Waco, TX
Posts: 186
These are the RPI front ones installed. They aren't special but they are practical. Tons better than the square ones that the dealer tried to sell me. I am supposed to get the rear ones in sometime next week. cant wait
Attached Images
  
__________________
Billet Bowtie Replacement Insert
Rpi Splash Guards
Factory Zl1 Rear Splash guards
ZL1Rockers
RedRaider2014 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:37 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.