Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis

Suspension / Brakes / Chassis All suspension, brakes and chassis discussions.

Reply
 
Thread Tools
Old 03-20-2014, 04:48 PM   #26
Pro Stock John
Writer
 
Pro Stock John's Avatar
 
Drives: 2010 SS / 1951 Mercury
Join Date: May 2009
Location: Chicago, IL
Posts: 4,687
Bump.... after all this time nobody has done 1.0 front drop, and 1.4 rear drop?

Too much rake here!
__________________
PROJECT HEAVY CHEVY: 2010 Camaro SS/RS |Mods for the Masses Articles
13.15@106 1.95 | 100% Stock
12.37@112 1.85 | Headers, Cats | 555R DR | CAI | UDP | Tune
12.06@113 1.70 | +NT05R 18s | + Circle D 3200
11.90@112 1.60 | + 3.91s | +Race Star 17x7s
Mods: GPI Tune | Bo's PTB | Kooks LTs | Hooker Maxflows | Circle D 3200 | New Era OTR | RCR AirRam Manifold | Powerbond UDP | 3.91s
Pro Stock John is online now   Reply With Quote
Old 03-20-2014, 05:11 PM   #27
Colt
 
Colt's Avatar
 
Drives: 2010 Camaro 1LT/RS Victory Red
Join Date: Jun 2009
Location: Knoxville, TN
Posts: 277
I don't have exactly what you're looking for since mine's a v6, but it's close. The split drop offered for the v6 comes with a 1.2" rear. I'll try to get some better pictures up tomorrow on my summer wheels.


__________________
Colt is offline   Reply With Quote
Old 03-20-2014, 05:26 PM   #28
BATMOB1LE
• HT •
 
BATMOB1LE's Avatar
 
Drives: 2013 2SS/RS 1LE
Join Date: Nov 2012
Location: Canada
Posts: 752
Quote:
Originally Posted by chaseroesner View Post
What tire set up are you running?? Just got my camaro and thinking of going this route. It looks awesome!
Yea seriously... I love 22s but that is an awesome stance! What tire/wheel combo is that?
__________________
2013 Camaro 2SS/RS/1LE - 402 of 451
"BATMOB1LE"
- Xpel Stealth Wrap - ZL1 Rockers - 18% Tint - Custom Badges - Heritage Grille - BMR 1.4" Springs - Solo Performance Axel-Back Exhaust
BATMOB1LE is offline   Reply With Quote
Old 03-20-2014, 07:05 PM   #29
Pro Stock John
Writer
 
Pro Stock John's Avatar
 
Drives: 2010 SS / 1951 Mercury
Join Date: May 2009
Location: Chicago, IL
Posts: 4,687
Actually those pics are very helpful, doesn't matter if V8 or V6.

So 1.0 front and 1.2 rear?

Your car looks great!
__________________
PROJECT HEAVY CHEVY: 2010 Camaro SS/RS |Mods for the Masses Articles
13.15@106 1.95 | 100% Stock
12.37@112 1.85 | Headers, Cats | 555R DR | CAI | UDP | Tune
12.06@113 1.70 | +NT05R 18s | + Circle D 3200
11.90@112 1.60 | + 3.91s | +Race Star 17x7s
Mods: GPI Tune | Bo's PTB | Kooks LTs | Hooker Maxflows | Circle D 3200 | New Era OTR | RCR AirRam Manifold | Powerbond UDP | 3.91s
Pro Stock John is online now   Reply With Quote
Old 03-20-2014, 11:05 PM   #30
Colt
 
Colt's Avatar
 
Drives: 2010 Camaro 1LT/RS Victory Red
Join Date: Jun 2009
Location: Knoxville, TN
Posts: 277
Quote:
Originally Posted by Pro Stock John View Post
Actually those pics are very helpful, doesn't matter if V8 or V6.

So 1.0 front and 1.2 rear?

Your car looks great!
Thanks, and yeah, BMR mentioned something about the rear v6 struts being different and that's why they offer the 1.2" for the the v6. I was able to get the 1" v8 springs for the front though to help remove the "raked" look.

I'll have some pictures up tomorrow on the factory SS/RS wheels that should look a lot better.
__________________
Colt is offline   Reply With Quote
Old 03-21-2014, 06:45 PM   #31
rjames
 
rjames's Avatar
 
Drives: 2012 45th 2ss
Join Date: Aug 2013
Location: Iowa
Posts: 94
So i started this thread some time ago and I ended up just doing the 1" all the way around for the time being. I did get a full 1" with the bmr springs and now that i did I do love the look just going that route. The rake is not as noticible dropping 1" f & r as I thought it would be. As for now this is the way it will stay.


__________________
2012 45th M6 Coupe, Stock internals,Cam/springs,ARH 1 7/8 cat delete,Flowmaster american thunder Cat back, 3:91 gears and K&N Cold air kit. 464 RWHP 434 TQ.Acs body kit,Bmr 1" springs,Vfn copo hood going on soon! Tuned by Speed Inc.
rjames is offline   Reply With Quote
Old 03-21-2014, 08:32 PM   #32
Colt
 
Colt's Avatar
 
Drives: 2010 Camaro 1LT/RS Victory Red
Join Date: Jun 2009
Location: Knoxville, TN
Posts: 277
Just an update for Pro Stock John, here's a better picture.

__________________
Colt is offline   Reply With Quote
Old 03-21-2014, 09:31 PM   #33
ClawSS
High-tech Redneck
 
ClawSS's Avatar
 
Drives: '10 CGM SS, '02 2500HD, '09 300SRT8
Join Date: Nov 2010
Location: Lexington, KY
Posts: 361
BMR Springs? 1.4"/1"

PSJ, not BMR, but Pfadt...the color may help you decide. Note the splitter. With these I was barely and I mean BARELY by less than 1/4" clearance able to pull onto the Hunter alignment rack this morning. Sorry, kinda dark.

__________________
"My friends call me Chris. Are you my friend?"

2010 CGM L99 2SS/RS - CAI, Elite catch-can, Magnaflow 3", Pfadt springs, BMR LCAs, BMR toelinks, BMR trailing arms, BMR cradle bushings, BMR sway bars w/ endlinks, Vitesse paddles, heritage grille, and an eBay splitter

Last edited by ClawSS; 03-23-2014 at 06:41 AM.
ClawSS is offline   Reply With Quote
Old 03-21-2014, 09:34 PM   #34
Pro Stock John
Writer
 
Pro Stock John's Avatar
 
Drives: 2010 SS / 1951 Mercury
Join Date: May 2009
Location: Chicago, IL
Posts: 4,687
Thanks guys!!!

Colt, those tires stock size on those black 20's?

Claw, looks awesome.

RJames, also too.

Looks like 1.0 front and back can't go wrong but I'd still like a little lower in back.
__________________
PROJECT HEAVY CHEVY: 2010 Camaro SS/RS |Mods for the Masses Articles
13.15@106 1.95 | 100% Stock
12.37@112 1.85 | Headers, Cats | 555R DR | CAI | UDP | Tune
12.06@113 1.70 | +NT05R 18s | + Circle D 3200
11.90@112 1.60 | + 3.91s | +Race Star 17x7s
Mods: GPI Tune | Bo's PTB | Kooks LTs | Hooker Maxflows | Circle D 3200 | New Era OTR | RCR AirRam Manifold | Powerbond UDP | 3.91s
Pro Stock John is online now   Reply With Quote
Old 03-21-2014, 10:44 PM   #35
Btrbimmer
 
Drives: 2SS 1LE Silver w/Recaro NPP
Join Date: Feb 2014
Location: Chester county, PA
Posts: 45
Quote:
Originally Posted by Pro Stock John View Post
Thanks guys!!!

Colt, those tires stock size on those black 20's?

Claw, looks awesome.

RJames, also too.

Looks like 1.0 front and back can't go wrong but I'd still like a little lower in back.
I agree that 1" drop F & R will not level out the car. I am considering the 1" drop up front and the 1.4" BMR springs for my 1LE, but I'm concerned about ride quality since its mostly a street car. I've also considered Eibach progressive springs (claimed 1" drop f & r), hoping the ride quality would be better than linear springs. All the linear springs seem to be 210-230 LBS/inch vs 165 LBS/inch for stock.
It seems like the progressive would ride closer to stock, yet not likely to bottom out either.

I'd like to hear more regarding folks that have installed any of these springs specifically about ride quality. OEM springs are often set higher for many reasons such as crash worthiness, headlight height, liability for damage from clearance issues, etc...

The BMR springs are claimed to be "dual rate springs with a linear working rate", but I'm still trying to determine how thats different than a progressive rate spring.
__________________
-BtrBimmer
'14 2SS 1LE NPP Recaros - bone stock for now

"Well, opinions are like a$$holes... everybody has one" -Harry Callahan

Btrbimmer is offline   Reply With Quote
Old 03-22-2014, 12:59 AM   #36
Colt
 
Colt's Avatar
 
Drives: 2010 Camaro 1LT/RS Victory Red
Join Date: Jun 2009
Location: Knoxville, TN
Posts: 277
John,

Yes those are still the stock 245/45 & 275/40 Pirellis.
__________________
Colt is offline   Reply With Quote
Old 03-22-2014, 01:03 AM   #37
Colt
 
Colt's Avatar
 
Drives: 2010 Camaro 1LT/RS Victory Red
Join Date: Jun 2009
Location: Knoxville, TN
Posts: 277
Quote:
Originally Posted by Btrbimmer View Post
I agree that 1" drop F & R will not level out the car. I am considering the 1" drop up front and the 1.4" BMR springs for my 1LE, but I'm concerned about ride quality since its mostly a street car. I've also considered Eibach progressive springs (claimed 1" drop f & r), hoping the ride quality would be better than linear springs. All the linear springs seem to be 210-230 LBS/inch vs 165 LBS/inch for stock.
It seems like the progressive would ride closer to stock, yet not likely to bottom out either.

I'd like to hear more regarding folks that have installed any of these springs specifically about ride quality. OEM springs are often set higher for many reasons such as crash worthiness, headlight height, liability for damage from clearance issues, etc...

The BMR springs are claimed to be "dual rate springs with a linear working rate", but I'm still trying to determine how thats different than a progressive rate spring.
I can't give you a comparison from BMR to another aftermarket company, just OEM. The ride is noticeably stiffer now, you can feel every dip/bump you hit, but IMO it feels much more like a sports car now. My car does have the original suspension and it's not a 1LE of course, so it was a lot "worse" to start with.
__________________
Colt is offline   Reply With Quote
Old 03-22-2014, 08:50 AM   #38
MDcarnut
 
Drives: 2013 IOM 2LT RS
Join Date: Feb 2014
Location: MD
Posts: 106
Looking for advice...I have a 2013 2LT RS and my goals:

Lower the car a little
Gain a little rake (I like the raked looked of slightly higher in the rear)
Soften the ride (the stock ride is a little stiff for me)
Cost is not an issue

Appreciate any input
MDcarnut is offline   Reply With Quote
Old 03-22-2014, 10:05 AM   #39
CamaroLS

 
CamaroLS's Avatar
 
Drives: 2011 Yellow Chevy Camaro LS
Join Date: Feb 2012
Location: Indiana
Posts: 1,166
Quote:
Originally Posted by Pro Stock John View Post
1.4 in front or back?

I had lunch with a car guy yesterday, and he said "nice rake you got going there." That noticeable. :(

How long does it take to do springs with impact?
Here is a quick video on installing the lowering springs. I bought a set of Eibach springs and I want a level ride also.

__________________
Roto-Fab intake, Vmax throttle body, Painted engine and fuse covers, Strut brace, Elite catch can, Custom yellow vinyl dash and door inserts, Center console gauges, Kicker stereo system, ZL1 pedals, ZL1 Rockers, Rear spoiler, SS Brembo brakes, Russell S.S. brake lines, 20" staggered Foose Legend wheels with Nitto Invo tires.
CamaroLS is online now   Reply With Quote
Old 03-22-2014, 10:44 AM   #40
Colt
 
Colt's Avatar
 
Drives: 2010 Camaro 1LT/RS Victory Red
Join Date: Jun 2009
Location: Knoxville, TN
Posts: 277
Quote:
Originally Posted by MDcarnut View Post
Looking for advice...I have a 2013 2LT RS and my goals:

Lower the car a little
Gain a little rake (I like the raked looked of slightly higher in the rear)
Soften the ride (the stock ride is a little stiff for me)
Cost is not an issue

Appreciate any input
If cost isn't an issue, then you would want to either go with coilovers or air ride. I don't have experience with either, but I'm sure someone will chime in about it.


As for the install time on the springs, the Camaro springs are not under too much pressure, therefor a spring compressor is not needed. The hardest part is reaching a few of the bolts. Make sure you get the tools recommended. After getting everything ready, it was about a 3 hour install for 2 of us.
__________________
Colt is offline   Reply With Quote
Old 03-22-2014, 12:25 PM   #41
Pro Stock John
Writer
 
Pro Stock John's Avatar
 
Drives: 2010 SS / 1951 Mercury
Join Date: May 2009
Location: Chicago, IL
Posts: 4,687
Thanks again Colt on the info!!

I'll ask the BMR guys if they offer 1.2 [rear] that would fit on my car too.
__________________
PROJECT HEAVY CHEVY: 2010 Camaro SS/RS |Mods for the Masses Articles
13.15@106 1.95 | 100% Stock
12.37@112 1.85 | Headers, Cats | 555R DR | CAI | UDP | Tune
12.06@113 1.70 | +NT05R 18s | + Circle D 3200
11.90@112 1.60 | + 3.91s | +Race Star 17x7s
Mods: GPI Tune | Bo's PTB | Kooks LTs | Hooker Maxflows | Circle D 3200 | New Era OTR | RCR AirRam Manifold | Powerbond UDP | 3.91s
Pro Stock John is online now   Reply With Quote
Old 03-23-2014, 04:56 PM   #42
Rctreece
 
Drives: 2013 SS/RS
Join Date: Jul 2013
Location: Caledonia, MS
Posts: 157
I love the rake.

1.4 front 1 rear
Attached Images
 
Rctreece is offline   Reply With Quote
Old 03-23-2014, 06:27 PM   #43
ClawSS
High-tech Redneck
 
ClawSS's Avatar
 
Drives: '10 CGM SS, '02 2500HD, '09 300SRT8
Join Date: Nov 2010
Location: Lexington, KY
Posts: 361
Rctreece...love that stance! But I couldn't go anywhere in this state and keep the splitter intact. Absolutely awesome look!
__________________
"My friends call me Chris. Are you my friend?"

2010 CGM L99 2SS/RS - CAI, Elite catch-can, Magnaflow 3", Pfadt springs, BMR LCAs, BMR toelinks, BMR trailing arms, BMR cradle bushings, BMR sway bars w/ endlinks, Vitesse paddles, heritage grille, and an eBay splitter
ClawSS is offline   Reply With Quote
Old 03-23-2014, 08:17 PM   #44
Rctreece
 
Drives: 2013 SS/RS
Join Date: Jul 2013
Location: Caledonia, MS
Posts: 157
Got the same problem down here. Damn curb jumped out in front of me. Messed up the chin spoiler. I fix it but it still needs paint. I ordered a mdp1 hood about a month ago and I am just waiting for it then I will get both painted along with mail slot filler panel. When I pull into the base and the guy ask about it I just tell to never let your wife drive. Lol
Attached Images
 
Rctreece is offline   Reply With Quote
Old 03-24-2014, 10:00 AM   #45
Pro Stock John
Writer
 
Pro Stock John's Avatar
 
Drives: 2010 SS / 1951 Mercury
Join Date: May 2009
Location: Chicago, IL
Posts: 4,687
I already have a ton of rake, this thread is about leveling out the car.
__________________
PROJECT HEAVY CHEVY: 2010 Camaro SS/RS |Mods for the Masses Articles
13.15@106 1.95 | 100% Stock
12.37@112 1.85 | Headers, Cats | 555R DR | CAI | UDP | Tune
12.06@113 1.70 | +NT05R 18s | + Circle D 3200
11.90@112 1.60 | + 3.91s | +Race Star 17x7s
Mods: GPI Tune | Bo's PTB | Kooks LTs | Hooker Maxflows | Circle D 3200 | New Era OTR | RCR AirRam Manifold | Powerbond UDP | 3.91s
Pro Stock John is online now   Reply With Quote
Old 03-25-2014, 06:31 AM   #46
Brazensol
 
Brazensol's Avatar
 
Drives: 2011 2SS/RS 2010 Silverado WT+
Join Date: Mar 2014
Location: Southern VA
Posts: 87
Quote:
Originally Posted by Pro Stock John View Post
Bump.... after all this time nobody has done 1.0 front drop, and 1.4 rear drop?

Too much rake here!
I'm looking at doing that very stance right now. I have .5" difference between the front and the rear and want to level it out. I have the dealer installed 21" wheel/tire so as soon as I find out if this combo will work I will be ordering me some springs!
Brazensol is offline   Reply With Quote
Old 03-25-2014, 12:49 PM   #47
honor first
MURICA!
 
honor first's Avatar
 
Drives: 2014 2SS 1LE
Join Date: Sep 2013
Location: RGV, Texas
Posts: 464


so this car is before lowering, right? and i still dont understand how 1.4 front and 1 rear like the OP (not pro street john's pic) can make it even remotely level. mind blown.
__________________
Pro Amore Patriae
God gave three gifts to man; dogs, women, and the LS motor.
2014 Camaro 2SS 6MT RS 1LE Black on Black
AFE Intake, Stainless Power Headers + HFC, BadlanzHPE Electric Cutouts. 315/275 Nittos, Wheels. Debadged, Cosmetic Mods, Sound System, More
honor first is offline   Reply With Quote
Old 03-25-2014, 12:52 PM   #48
Pro Stock John
Writer
 
Pro Stock John's Avatar
 
Drives: 2010 SS / 1951 Mercury
Join Date: May 2009
Location: Chicago, IL
Posts: 4,687
That is my before pic.

She is too high in the butt.

__________________
PROJECT HEAVY CHEVY: 2010 Camaro SS/RS |Mods for the Masses Articles
13.15@106 1.95 | 100% Stock
12.37@112 1.85 | Headers, Cats | 555R DR | CAI | UDP | Tune
12.06@113 1.70 | +NT05R 18s | + Circle D 3200
11.90@112 1.60 | + 3.91s | +Race Star 17x7s
Mods: GPI Tune | Bo's PTB | Kooks LTs | Hooker Maxflows | Circle D 3200 | New Era OTR | RCR AirRam Manifold | Powerbond UDP | 3.91s
Pro Stock John is online now   Reply With Quote
Old 03-25-2014, 12:55 PM   #49
honor first
MURICA!
 
honor first's Avatar
 
Drives: 2014 2SS 1LE
Join Date: Sep 2013
Location: RGV, Texas
Posts: 464
Quote:
Originally Posted by Pro Stock John View Post
That is my before pic.

She is too high in the butt.

so have you already done a drop? was it the 1.4 front , 1 rear ? pics if so please. sorry if theyre in the thread, im just overall confused who has what drop
__________________
Pro Amore Patriae
God gave three gifts to man; dogs, women, and the LS motor.
2014 Camaro 2SS 6MT RS 1LE Black on Black
AFE Intake, Stainless Power Headers + HFC, BadlanzHPE Electric Cutouts. 315/275 Nittos, Wheels. Debadged, Cosmetic Mods, Sound System, More
honor first is offline   Reply With Quote
Old 03-25-2014, 01:00 PM   #50
Pro Stock John
Writer
 
Pro Stock John's Avatar
 
Drives: 2010 SS / 1951 Mercury
Join Date: May 2009
Location: Chicago, IL
Posts: 4,687
I have not lowered the car yet.
__________________
PROJECT HEAVY CHEVY: 2010 Camaro SS/RS |Mods for the Masses Articles
13.15@106 1.95 | 100% Stock
12.37@112 1.85 | Headers, Cats | 555R DR | CAI | UDP | Tune
12.06@113 1.70 | +NT05R 18s | + Circle D 3200
11.90@112 1.60 | + 3.91s | +Race Star 17x7s
Mods: GPI Tune | Bo's PTB | Kooks LTs | Hooker Maxflows | Circle D 3200 | New Era OTR | RCR AirRam Manifold | Powerbond UDP | 3.91s
Pro Stock John is online now   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:16 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.