List of Intakes that will work with the TVS-2300 MagnaCharger - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JJ2010 · 07-18-2009, 09:21 PM

I have e-mailed and called so many CAI people trying to find out if there product will work with the MagnaCharger TVS-2300.I have gotten a few to say it should work.I purchased a LMR CAI and realized it want flex enough to fit up to a MagnaCharger TVS-2300.I am going to be doing a TVS-2300 install on my SS in just a few weeks and still haven't found much out there that will work for sure.Please chime in if you know of a CAI that will work with the TVS-2300....

*mlee* · 07-18-2009, 09:39 PM

I bought the Hennessey CAI for exactly that reason....

Crowley · 07-18-2009, 09:40 PM

Subscribing ... I'll be in the same boat in a few weeks ..

Crowley

JJ2010 · 07-18-2009, 09:53 PM

Quote:

Originally Posted by mlee

I bought the Hennessey CAI for exactly that reason....

How do you like it ???

The intake itself looks nice,but the heat shield looks like there isn't much to it....

The Hennessey CAI is about the only one I see that will work for sure....

ADM PERFORMANCE · 07-18-2009, 10:08 PM

Quote:

Originally Posted by Crowley

Subscribing ... I'll be in the same boat in a few weeks ..

Crowley

I can just build you one if need be.....Don't go spend any money just yet.

- with factory cover

- cover removed picture

Andy

*mlee* · 07-18-2009, 10:11 PM

I'm pretty happy with it... sounds great too. The shield is pretty much like all the rest. I've seen quite a few different shrouds and most are just a piece of sheetmetal or plastic bolted to the fender well. I think everyone is starting to refine their shrouds to look better than the prototypes...

I'll take a photo of mine tomorrow and post it here. In the meantime I took some photos a while back at some prototypes... check out post#29
http://www.camaro5.com/forums/showthread.php?t=19716

Crowley · 07-18-2009, 10:41 PM

Quote:

Originally Posted by ADM PERFORMANCE

I can just build you one if need be.....Don't go spend any money just yet.

- with factory cover

- cover removed picture

Andy

We will figure it out .. .we can run the stock intake until you come up with something

Crowley

JM10 · 07-19-2009, 05:04 PM

What about the vararam intake?

10aSSee D · 07-19-2009, 06:56 PM

Doesn't magnacharger have one as well?

JJ2010 · 07-19-2009, 09:01 PM

Quote:

Originally Posted by JM10

What about the vararam intake?

Can't get a answer from them.....

JJ2010 · 07-19-2009, 09:04 PM

Quote:

Originally Posted by 10aSSee D

Doesn't magnacharger have one as well?

What they send in there kit is a tuned tube and a K&N filter to replace the stock filter....

You use your stock air box....

They recommend using there set up and I have had several tuners say use there set up....

JM10 · 07-19-2009, 09:13 PM

I like the stock look of the magnacharger setup:

usmcjlp · 07-19-2009, 09:25 PM

I agree. I like the stock look. I don't put much faith in cold air intakes. The tvs2300 has twin rotors pulling a ton of air. It wasn't designed to need one of those things, why bother?

JJ2010 · 07-19-2009, 09:28 PM

Quote:

Originally Posted by JM10

I like the stock look of the magnacharger setup:

I don't know if there will be a great difference between what MagnaCharger provides in there kit verses most CAI.....

JM10 · 07-19-2009, 09:45 PM

Im going with the vararam intake while I save $$$ for the blower

hot ss · 07-19-2009, 10:00 PM

i bet gmpp will work

JJ2010 · 07-19-2009, 10:07 PM

Quote:

Originally Posted by hot ss

i bet gmpp will work

I have my doubts that the GMPP intake will be much more then just a pretty option......

We just don't have much info on the GMPP intake......

Chrome doesn't impress me as much as HP.......

hot ss · 07-19-2009, 10:10 PM

GMPP have dry, high flow filters, and typically draw from the cold air in the fender, as opposed to drawing air from under the hot hood. the box appears to be in same spot, so the few i have bought have perfect fitment, and work without getting oiled up maf sensor.

pharmd · 07-20-2009, 01:52 PM

We will be testing a popular intake for use with the TVS on mine later this week...Me or the Manufacturer will be keeping you up to date with the results...It will be interesting to see how much additional power this intake makes on a forced induction application like this one.

JJ2010 · 07-20-2009, 02:20 PM

Quote:

Originally Posted by pharmd

We will be testing a popular intake for use with the TVS on mine later this week...Me or the Manufacturer will be keeping you up to date with the results...It will be interesting to see how much additional power this intake makes on a forced induction application like this one.

Keep us posted.....

RPM will be installing mine in a couple weeks...

Sales@Hennessey · 07-21-2009, 11:30 AM

Our induction system will work with the TVS2300. A different coupler is needed as the pipe comes off the Throttle body and we do sell these individually to customers who have purchased the intake before buying the blower.

Speak to you soon,
James

http://www.hennesseyperformancestore...upgrades4.html

GM4lyfe · 07-21-2009, 12:46 PM

If you use your stock set up people will think it came factory supercharged. Ask me how I know

racer778 · 03-18-2010, 12:32 PM

Bringing this thread to the top... can we get more answers on what CAI to use for the TVS2300 magnacharger. I have one installed with the stock Airbox and what Magnuson provided. Please let me know why you chose the CAI as well. Thanks in Advance

Buffnshine · 03-18-2010, 12:57 PM

I thought the ADM Performance box would mate up to it, isnt that one of their selling points

brAnd7onX · 03-18-2010, 03:18 PM

I read somewhere in another thread recently that someone tried using the cold air induc. intake with the maggie and it didnt fit right but he got it to fit somehow. If I find it ill edit this post.

07-18-2009, 09:21 PM	#1
JJ2010 Drives: 2010 Camaro SS Join Date: Oct 2008 Location: Smithfield,NC Posts: 1,229	List of Intakes that will work with the TVS-2300 MagnaCharger I have e-mailed and called so many CAI people trying to find out if there product will work with the MagnaCharger TVS-2300.I have gotten a few to say it should work.I purchased a LMR CAI and realized it want flex enough to fit up to a MagnaCharger TVS-2300.I am going to be doing a TVS-2300 install on my SS in just a few weeks and still haven't found much out there that will work for sure.Please chime in if you know of a CAI that will work with the TVS-2300....

07-18-2009, 09:40 PM	#3
Crowley Okie doke Drives: 2012 GT500 Join Date: Sep 2008 Location: McKinney Texas Posts: 3,772 View My Garage	Subscribing ... I'll be in the same boat in a few weeks .. Crowley __________________

07-18-2009, 10:11 PM	#6
mlee H-Town Camaro Club Drives: Number Twenty-Three Join Date: Oct 2008 Location: Conroe, TX Posts: 18,788 View My Garage	I'm pretty happy with it... sounds great too. The shield is pretty much like all the rest. I've seen quite a few different shrouds and most are just a piece of sheetmetal or plastic bolted to the fender well. I think everyone is starting to refine their shrouds to look better than the prototypes... I'll take a photo of mine tomorrow and post it here. In the meantime I took some photos a while back at some prototypes... check out post#29 http://www.camaro5.com/forums/showthread.php?t=19716 __________________ .

07-19-2009, 06:56 PM	#9
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 1,213	Doesn't magnacharger have one as well? __________________ MODS: Whipple 2.9L SUPERCHARGER 666RWHP 562TQ ADM Stage 2 Cam ADM Dual Fuel Pump System ADM CAI ADM Boost & Air Fuel Ratio Gauges Patriot Performance Dual Valve Springs Hurst Short Throw Shifter KW V1 Coilovers Stainless Works Full Length Headers & Full Exhaust Elite Engineering Catch Can Forgeline GA3 Satin black wheels 20x9.5-20x11

07-20-2009, 01:52 PM	#19
pharmd Master of Medicine Drives: 2012 VW GTI, 2007 TBSS, 2002 Camaro Join Date: Oct 2008 Location: Morehead, Kentucky Posts: 782	We will be testing a popular intake for use with the TVS on mine later this week...Me or the Manufacturer will be keeping you up to date with the results...It will be interesting to see how much additional power this intake makes on a forced induction application like this one. __________________

07-18-2009, 09:39 PM	#2
mlee H-Town Camaro Club Drives: Number Twenty-Three Join Date: Oct 2008 Location: Conroe, TX Posts: 18,788 View My Garage	I bought the Hennessey CAI for exactly that reason.... Attached Images __________________ .

07-19-2009, 05:04 PM	#8
JM10 Se habla español Drives: 2010 Camaro SS/RS VR Join Date: Jun 2009 Location: Arizona/Sonora Posts: 591	What about the vararam intake?

07-19-2009, 09:13 PM	#12
JM10 Se habla español Drives: 2010 Camaro SS/RS VR Join Date: Jun 2009 Location: Arizona/Sonora Posts: 591	I like the stock look of the magnacharger setup:

07-19-2009, 09:25 PM	#13
usmcjlp Drives: 2SS/RS LS3 RJT Join Date: Jun 2009 Location: Northern Virginia Posts: 756	I agree. I like the stock look. I don't put much faith in cold air intakes. The tvs2300 has twin rotors pulling a ton of air. It wasn't designed to need one of those things, why bother?

07-19-2009, 09:45 PM	#15
JM10 Se habla español Drives: 2010 Camaro SS/RS VR Join Date: Jun 2009 Location: Arizona/Sonora Posts: 591	Im going with the vararam intake while I save $$$ for the blower

07-19-2009, 10:00 PM	#16
hot ss Drives: aqua 2ss l99 Join Date: Jun 2009 Location: Edmonton Posts: 1,222	i bet gmpp will work

07-19-2009, 10:10 PM	#18
hot ss Drives: aqua 2ss l99 Join Date: Jun 2009 Location: Edmonton Posts: 1,222	GMPP have dry, high flow filters, and typically draw from the cold air in the fender, as opposed to drawing air from under the hot hood. the box appears to be in same spot, so the few i have bought have perfect fitment, and work without getting oiled up maf sensor.

07-21-2009, 11:30 AM	#21
Sales@Hennessey Hennessey Performance Drives: 2010 Camaro Join Date: May 2009 Location: Houston, TX Posts: 622	Our induction system will work with the TVS2300. A different coupler is needed as the pipe comes off the Throttle body and we do sell these individually to customers who have purchased the intake before buying the blower. Speak to you soon, James http://www.hennesseyperformancestore...upgrades4.html __________________ Blake Didier Hennessey Performance - Sales Manager Office: 713-650-5326 Email: blake@hennesseyperformance.com Website: www.hennesseyperformance.com Follow Me on Facebook

07-21-2009, 12:46 PM	#22
GM4lyfe A GM nut-swinger! Drives: A Car Join Date: May 2009 Location: United Kingdom Posts: 261	If you use your stock set up people will think it came factory supercharged. Ask me how I know __________________ 2004 GTO Quicksilver 2009 G8 Liquid Red 2005 CTS-V Black Raven

03-18-2010, 12:32 PM	#23
racer778 camaro under construction Drives: 2010 camaro 2SS/RS Join Date: Jan 2010 Location: San Antonio Texas Posts: 898 View My Garage	Bringing this thread to the top... can we get more answers on what CAI to use for the TVS2300 magnacharger. I have one installed with the stock Airbox and what Magnuson provided. Please let me know why you chose the CAI as well. Thanks in Advance

03-18-2010, 12:57 PM	#24
Buffnshine So Cal Camaro5 Race Team Drives: '10 SS/RS, '06 HHR, '70 El Camino Join Date: Sep 2009 Location: Huntington Beach, CA Posts: 2,657 View My Garage	I thought the ADM Performance box would mate up to it, isnt that one of their selling points __________________ TEAM L99 - So Cal Camaro5 Race Team #27 9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels

03-18-2010, 03:18 PM	#25
brAnd7onX Team L99 Drives: 2012 Camaro SS IOM Join Date: Oct 2009 Location: SoCal Posts: 1,535	I read somewhere in another thread recently that someone tried using the cold air induc. intake with the maggie and it didnt fit right but he got it to fit somehow. If I find it ill edit this post.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
This site is like crack. You know you're addicted to Camaro5 when...	GameOver620	5th Gen Camaro SS LS LT General Discussions	465	01-03-2011 02:28 PM
Magnacharger TVS 2300 in stock @ Haddad Motorsports	HaddadMotorsports	Forced Induction	6	10-20-2009 12:08 PM
WHO WANTS A MAGGIE??? PACKAGE DEAL FOR THE TVS 2300 INSTALLED	east TX Muscle cars	USA - Texas	10	06-11-2009 10:26 AM
Dealer installed TVS2300 supercharger should be OEM OPTION. Especially if Z28 dead.	TT C6	Forced Induction - V8	14	03-31-2009 10:05 AM