Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vitesse Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8

Forced Induction - V8 V8 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 01-06-2014, 04:53 PM   #1
BullF-16
USAF retired! Thank God!
 
BullF-16's Avatar
 
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28
Join Date: Jul 2011
Location: North Texas
Posts: 2,629
Woot! Im next

My shop, SNL performance/Monster Clutch Co just finished the major portion of a twin turbo custom install. Its a CTS-V with LSX 434, and Mast heads. so pretty much an identical setup to what im going with. This is on a 4L80 vs my M6.

1309/1306 rwhp/tq......on a stingy ass Dynocomm dyno. I know this dyno well and it is indeed stingy.



This is on E85 however and 28psi. Same car made 998 on 18.5psi. Im shooting for 20 psi as my goal is only 1000-1100. I will be running 96 octane (Torco blended in to 93) and ALKY meth, Squash dual 400LPH return style. PTE6766 turbos T4 housings with .96 A/R covers

My car is next up and i should have it there in a week or so....Right Steve?

SNL has been cranking out some Monsters lately....Texas/OK 5th gens should take note of this shop.
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: STUPID SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates setup by JusticePete! :Gforce 9" 35spline S-Trac, 300M axles, 3.5"alum DS, MCLeod RXT clutch, 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
BullF-16 is offline   Reply With Quote
Old 01-06-2014, 05:18 PM   #2
Steve@SNL/Monster Clutch
Owner SNL/Monster Clutch

 
Drives: 2014 SS
Join Date: Jan 2011
Location: Haslet, TX
Posts: 692
Thanks for the post Jim, we've got an edited video that is out there. Now that I've got our account here straight (small misunderstanding with mods) I'll post more information and pictures.

We were going to bump this to around 35 psi, but, the customer said that 1300+ is enough STD numbers were 1354 for those that use that correction.

We have two other cars that will be putting out over 1450 rwhp, both in CTSV's. These builds are becoming more and more prevalent and we're starting to get quite the waiting list for these setups.

I'm excited and blessed to have customers give us an opportunity to do these types of things, not to mention - as an owner - I'm blessed to have a competent crew that can get these done.
__________________
We've got the clutch you need for your 5th Gen! If you have any questions just give us a shout, or, take a look at our site - http://monsterclutches.com/gen-5-cam...eet-multi-disc
Steve@SNL/Monster Clutch is offline   Reply With Quote
Old 01-06-2014, 05:18 PM   #3
Bo White



 
Bo White's Avatar
 
Drives: 2010 Summit White 1SS
Join Date: Feb 2012
Location: Vance Alabama
Posts: 2,957
Nice, build boost and the tires will look over at each other and scream on the street
Bo White is offline   Reply With Quote
Old 01-06-2014, 05:20 PM   #4
Steve@SNL/Monster Clutch
Owner SNL/Monster Clutch

 
Drives: 2014 SS
Join Date: Jan 2011
Location: Haslet, TX
Posts: 692
Quote:
Originally Posted by Bo White View Post
Nice, build boost and the tires will look over at each other and scream on the street
LOL, yes they do!
__________________
We've got the clutch you need for your 5th Gen! If you have any questions just give us a shout, or, take a look at our site - http://monsterclutches.com/gen-5-cam...eet-multi-disc
Steve@SNL/Monster Clutch is offline   Reply With Quote
Old 01-06-2014, 08:14 PM   #5
thebeast916

 
Drives: Blown G8 GT
Join Date: Apr 2010
Location: Orlando, FL
Posts: 931
Sick Cadillac. Nice work
__________________
2008 G8 GT
TSP Forged LS3-TSP Ported L92's-219/231 RCR Cam-Procharger-Kooks-Solo 3in Exhaust-SS Wheels-Brembo-Demon8 Designs Triple Gauge Pod-Kicker CVX10-BMR-BC Racing Coilovers-Squash Pump-Coolingmist Meth Injection
???rwhp ??? Rwtq
11.2 at 131 1.9 60ft
thebeast916 is offline   Reply With Quote
Old 01-06-2014, 08:22 PM   #6
Padre
Only drives on Sundays
 
Padre's Avatar
 
Drives: 11 2SS/RS, Black/Inferno, L99 A6
Join Date: Feb 2011
Location: Dalton, GA
Posts: 2,394
Good luck!

Padre
__________________

The "Heretic": '11 2SS/RS L99 A6 Black/Inferno. Build Journal, Videos
D1SC GT9 JBA-LT = 720/680 | 10.330 @ 133.61, 1.546 sixty... Camaro King at ECS V, Darlington.
Padre is offline   Reply With Quote
Old 01-06-2014, 09:50 PM   #7
STSL
Account Suspended
 
Drives: 2010 ZR1 Camaro
Join Date: Dec 2012
Location: Everywhere, USA
Posts: 164
Any tech ? LOL
STSL is offline   Reply With Quote
Old 01-06-2014, 09:54 PM   #8
BullF-16
USAF retired! Thank God!
 
BullF-16's Avatar
 
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28
Join Date: Jul 2011
Location: North Texas
Posts: 2,629
Quote:
Originally Posted by Street Slayer View Post
Any tech ? LOL
elaborate please
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: STUPID SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates setup by JusticePete! :Gforce 9" 35spline S-Trac, 300M axles, 3.5"alum DS, MCLeod RXT clutch, 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
BullF-16 is offline   Reply With Quote
Old 01-06-2014, 10:04 PM   #9
STSL
Account Suspended
 
Drives: 2010 ZR1 Camaro
Join Date: Dec 2012
Location: Everywhere, USA
Posts: 164
Its a tech section right? you first lol been thinking over turbos
STSL is offline   Reply With Quote
Old 01-06-2014, 10:13 PM   #10
BullF-16
USAF retired! Thank God!
 
BullF-16's Avatar
 
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28
Join Date: Jul 2011
Location: North Texas
Posts: 2,629
Quote:
Originally Posted by Street Slayer View Post
Its a tech section right? you first lol been thinking over turbos
Do you speak English or are you just drunk? Really difficult to understand what you are trying to convey. Are you wanting details on the CTS-V?
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: STUPID SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates setup by JusticePete! :Gforce 9" 35spline S-Trac, 300M axles, 3.5"alum DS, MCLeod RXT clutch, 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
BullF-16 is offline   Reply With Quote
Old 01-06-2014, 10:20 PM   #11
Steve@SNL/Monster Clutch
Owner SNL/Monster Clutch

 
Drives: 2014 SS
Join Date: Jan 2011
Location: Haslet, TX
Posts: 692
Quote:
Originally Posted by Street Slayer View Post
Its a tech section right? you first lol been thinking over turbos
434 LSx, LS7 heads, twin 6766 Precisions, custom twin turbo setup from us, RPM 4L80, a/w intercooler, etc. The car came to us with twin gt35's making a lot less than what was promised. We made changes to it then and put it back to 1100 rwhp on E85 (car made 1100 on race gas before, it made considerably less on our dyno) and the customer wasn't satisfied after another one of our customers made 1160 through a TH400. That said, we met his goal of 1300 rwhp.

Do you need more? Even though we're competitors I'd be more than happy to help you with selections on turbos, we've got quite a bit of experience.
__________________
We've got the clutch you need for your 5th Gen! If you have any questions just give us a shout, or, take a look at our site - http://monsterclutches.com/gen-5-cam...eet-multi-disc

Last edited by Steve@SNL/Monster Clutch; 01-07-2014 at 10:23 AM.
Steve@SNL/Monster Clutch is offline   Reply With Quote
Old 01-06-2014, 10:52 PM   #12
BullF-16
USAF retired! Thank God!
 
BullF-16's Avatar
 
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28
Join Date: Jul 2011
Location: North Texas
Posts: 2,629
Quote:
Originally Posted by Steve@SNL/Monster Clutch View Post
434 lsx, LS7 heads, twin 6766 Precisions, custom twin turbo setup from us, RPM 4L80, a/w intercooler, etc. The car came to us with twin gt35's making a lot less than what was promised. We made changes to it then and put it back to 1100 rwhp on E 85 (car made 1100 on race gas before, it made considerably less on our dyno) and the customer wasn't satisfied after another one of our customers made 1160 through a TH400. That said, we met his goal of 1300 rwhp.

Do you need more? Even though we're competitors I'd be more than happy to help you with selections on turbos, we've got quite a bit of experience.
Thanks Steve. Didn't want to post details since it's not my car.
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: STUPID SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates setup by JusticePete! :Gforce 9" 35spline S-Trac, 300M axles, 3.5"alum DS, MCLeod RXT clutch, 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
BullF-16 is offline   Reply With Quote
Old 01-06-2014, 10:54 PM   #13
Steve@SNL/Monster Clutch
Owner SNL/Monster Clutch

 
Drives: 2014 SS
Join Date: Jan 2011
Location: Haslet, TX
Posts: 692
Quote:
Originally Posted by BullF-16 View Post
Thanks Steve. Didn't want to post details since it's not my car.
Not a problem, I appreciate that.
__________________
We've got the clutch you need for your 5th Gen! If you have any questions just give us a shout, or, take a look at our site - http://monsterclutches.com/gen-5-cam...eet-multi-disc
Steve@SNL/Monster Clutch is offline   Reply With Quote
Old 01-09-2014, 12:03 AM   #14
luckynuts

 
luckynuts's Avatar
 
Drives: 10 ABM 1SS/00 Z28 Conv/14 SumWh 2LT
Join Date: Apr 2009
Location: Kingston, ON
Posts: 834
Hurry the hell up on this build guys!!!!!!!
__________________
1 SS/RS 6Sp White Rally Stripes
luckynuts is offline   Reply With Quote
Old 01-10-2014, 12:33 PM   #15
Steve@SNL/Monster Clutch
Owner SNL/Monster Clutch

 
Drives: 2014 SS
Join Date: Jan 2011
Location: Haslet, TX
Posts: 692
Quote:
Originally Posted by luckynuts View Post
Hurry the hell up on this build guys!!!!!!!
It's done... there are two others behind it that will make more power.

Oh, and we scheduled Jim's build...
__________________
We've got the clutch you need for your 5th Gen! If you have any questions just give us a shout, or, take a look at our site - http://monsterclutches.com/gen-5-cam...eet-multi-disc
Steve@SNL/Monster Clutch is offline   Reply With Quote
Old 01-10-2014, 01:04 PM   #16
BullF-16
USAF retired! Thank God!
 
BullF-16's Avatar
 
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28
Join Date: Jul 2011
Location: North Texas
Posts: 2,629
Quote:
Originally Posted by Steve@SNL/Monster Clutch View Post
It's done... there are two others behind it that will make more power.

Oh, and we scheduled Jim's build...
I think he's referring to my car. He wants his D1SC and other goodies.

__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: STUPID SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates setup by JusticePete! :Gforce 9" 35spline S-Trac, 300M axles, 3.5"alum DS, MCLeod RXT clutch, 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
BullF-16 is offline   Reply With Quote
Old 01-10-2014, 01:22 PM   #17
Steve@SNL/Monster Clutch
Owner SNL/Monster Clutch

 
Drives: 2014 SS
Join Date: Jan 2011
Location: Haslet, TX
Posts: 692
Quote:
Originally Posted by BullF-16 View Post
I think he's referring to my car. He wants his D1SC and other goodies.

Reading comprehension owns me sometimes. LOL
__________________
We've got the clutch you need for your 5th Gen! If you have any questions just give us a shout, or, take a look at our site - http://monsterclutches.com/gen-5-cam...eet-multi-disc
Steve@SNL/Monster Clutch is offline   Reply With Quote
Old 01-10-2014, 01:53 PM   #18
BullF-16
USAF retired! Thank God!
 
BullF-16's Avatar
 
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28
Join Date: Jul 2011
Location: North Texas
Posts: 2,629
Quote:
Originally Posted by Steve@SNL/Monster Clutch View Post
Reading comprehension owns me sometimes. LOL
Seeing how busy you guys are I dont doubt it!

See you on the 18th for drop off
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: STUPID SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates setup by JusticePete! :Gforce 9" 35spline S-Trac, 300M axles, 3.5"alum DS, MCLeod RXT clutch, 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
BullF-16 is offline   Reply With Quote
Old 01-11-2014, 11:38 AM   #19
Steve@SNL/Monster Clutch
Owner SNL/Monster Clutch

 
Drives: 2014 SS
Join Date: Jan 2011
Location: Haslet, TX
Posts: 692
Quote:
Originally Posted by BullF-16 View Post
Seeing how busy you guys are I dont doubt it!

See you on the 18th for drop off
True story!

Thanks again!
__________________
We've got the clutch you need for your 5th Gen! If you have any questions just give us a shout, or, take a look at our site - http://monsterclutches.com/gen-5-cam...eet-multi-disc
Steve@SNL/Monster Clutch is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.