Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Flowmaster Exhaust
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 07-26-2009, 06:12 PM   #1
Ltdodge

 
Ltdodge's Avatar
 
Drives: 2008 Z06
Join Date: Apr 2009
Location: Oviedo, Florida
Posts: 893
Borla S type catback video

I found this video on youtube as trhe engineers were testing the Borla s type catback exhaust...

__________________
Ltdodge is offline   Reply With Quote
Old 07-27-2009, 12:32 AM   #2
Doc
Dances With Mustangs
 
Doc's Avatar
 
Drives: 2010 1SS/RS MT
Join Date: May 2009
Location: California
Posts: 3,583
Man that sounds good...I think I've found my exhaust hehe, (sorry LoudMouth II).
__________________

Blue Angel is here!!
1SS/RS LS3 M6 IBM
Doc is offline   Reply With Quote
Old 07-27-2009, 01:04 AM   #3
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,066
Did I read during the video that it said it was in combination with LT headers? So, is that sound with or with out LT?

Sounds pretty good I must admit. I would strongly consider this one. However, you can get an SLP LM II for about $550 and then another $100 for the maganaflow x-pipe. Now grant it the system would be kinda pieced together system but still your talking $650 vs $1,500.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 07-27-2009, 01:44 AM   #4
Gentry78
HOOK'EM
 
Gentry78's Avatar
 
Drives: 97 c1500/92 olds
Join Date: Oct 2008
Location: Texas
Posts: 5,283
Quote:
Originally Posted by caverman View Post
Did I read during the video that it said it was in combination with LT headers? So, is that sound with or with out LT?

Sounds pretty good I must admit. I would strongly consider this one. However, you can get an SLP LM II for about $550 and then another $100 for the maganaflow x-pipe. Now grant it the system would be kinda pieced together system but still your talking $650 vs $1,500.
it doesn't look like there are LT on there they have the stock cats and i don't see a collector

i think they are just saying they are developing them as well


sounds great i wanna hear it under load
Gentry78 is offline   Reply With Quote
Old 07-27-2009, 02:52 AM   #5
Paperer
Ragin' Cajun
 
Paperer's Avatar
 
Drives: '02 Camaro SS - '10 CGM 2SS/RS
Join Date: Jul 2008
Location: Texas/Oklahoma
Posts: 1,170
Quote:
Originally Posted by Doc View Post
Man that sounds good...I think I've found my exhaust hehe, (sorry LoudMouth II).

Hhaha, I think I agree. I'll have to check out the SLP video again.
__________________
http://img.photobucket.com/albums/v202/paper2302/Siggy.jpg
Paperer is offline   Reply With Quote
Old 07-27-2009, 10:31 AM   #6
Shurenuff

 
Shurenuff's Avatar
 
Drives: 2002 Nissan Altima
Join Date: Jul 2008
Location: Chicago, IL
Posts: 2,056
I hope they do an axle back Borla S type system. I'd be all over that. $1200-1500 is a little too steep for me for the cat back version.

Anyone know if they'll offer an axle back version?
Shurenuff is offline   Reply With Quote
Old 07-27-2009, 10:54 AM   #7
jpsuperman81
That's Right 478whp450tq!
 
jpsuperman81's Avatar
 
Drives: 2010 2SS/RS Rally Yellow
Join Date: Mar 2009
Location: Indian Trail, NC
Posts: 2,334
Quote:
Originally Posted by Shurenuff View Post
I hope they do an axle back Borla S type system. I'd be all over that. $1200-1500 is a little too steep for me for the cat back version.

Anyone know if they'll offer an axle back version?
They already have one and mine is already on order.http://www.lmperformance.com/53588/119.html
I have the ARH headers/exhaust here already and the borla on the way, so that will be my setup ARH with borla mufflers. Hopefully installed as soon as car is here.
__________________
I would like to apoligize ahead of time if any of my posts bother you, I am quite a large smartass and very expressive of my opinion!
I came here to chew bubble gum and kick ass and I'm all out of bubble gum!
Ordered Feb. 13 2009: 2SS/RS/M6/Sunroof/ Rally Yellow built 8/7 Vin# 33534, Delivered 8/26/09!
jpsuperman81 is offline   Reply With Quote
Old 07-27-2009, 05:16 PM   #8
ChevyBoiSS
 
ChevyBoiSS's Avatar
 
Drives: 2011 2SS/RS RJT
Join Date: Oct 2008
Location: Chicago, IL
Posts: 302
by far the best sounding to me
__________________

Thinking bout Victory Red 1SS/RS with Matte Black Custom Stripes. Automatic Transmission (L99)
and apparently a $900 dollar whole in my roof.


OHH.. DID I MENTION 24" off THE GROUND?!
ChevyBoiSS is offline   Reply With Quote
Old 07-27-2009, 06:46 PM   #9
Ltdodge

 
Ltdodge's Avatar
 
Drives: 2008 Z06
Join Date: Apr 2009
Location: Oviedo, Florida
Posts: 893
Quote:
Originally Posted by caverman View Post
Did I read during the video that it said it was in combination with LT headers? So, is that sound with or with out LT?

Sounds pretty good I must admit. I would strongly consider this one. However, you can get an SLP LM II for about $550 and then another $100 for the maganaflow x-pipe. Now grant it the system would be kinda pieced together system but still your talking $650 vs $1,500.

where can you get an x pipe for $100?
__________________
Ltdodge is offline   Reply With Quote
Old 07-27-2009, 06:47 PM   #10
SwiftCat
Get me my meds!
 
SwiftCat's Avatar
 
Drives: 2010 SS/RS M6 & solid black, baby!
Join Date: Jun 2009
Location: Maple Valley, Wa.
Posts: 279
Quote:
Originally Posted by jpsuperman81 View Post
They already have one and mine is already on order.http://www.lmperformance.com/53588/119.html
I have the ARH headers/exhaust here already and the borla on the way, so that will be my setup ARH with borla mufflers. Hopefully installed as soon as car is here.
I'm with ya, buddy. I've got the same setup (Borla axle-back w/ ARH headers) ordered and hopefully on the way sometime soon. Maybe we can load some video on a common thread once we both have everything installed. I'll have Blood enterprises here in Auburn, Wa. do a baseline dyno and then another right after. I'll wait to tune it...that'll come after I add the Vararam CAI sometime in the near-future.
SwiftCat is offline   Reply With Quote
Old 07-27-2009, 08:10 PM   #11
BLACK10

 
BLACK10's Avatar
 
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60'
Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 5,032
Quote:
Originally Posted by Ltdodge View Post
where can you get an x pipe for $100?


http://www.summitracing.com/parts/MPE-10791/
BLACK10 is offline   Reply With Quote
Old 07-27-2009, 08:41 PM   #12
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,066
Quote:
Originally Posted by BLACK10 View Post
Yep...that's the one. Another OP on 5thGen.org said he could definatley feel the difference when he replaced the factory H-pipe for the magnaflow x-pipe. Can't find the post right now but it sounded very promising and for $100 you can't go that wrong.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 07-27-2009, 08:48 PM   #13
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,066
Just looked at the link from LMP for the Borla axle-back. Man...that's going to be a tuff decision between the Borla and SLP. I wonder what size the Borla tips are going to be. Whoever gets the Borla axleback system, please post pics and video once it's on. I still have about 6 mths or so before I get an SS so I hope I can hear them in person sometime.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 07-27-2009, 09:02 PM   #14
Ltdodge

 
Ltdodge's Avatar
 
Drives: 2008 Z06
Join Date: Apr 2009
Location: Oviedo, Florida
Posts: 893
Quote:
Originally Posted by caverman View Post
Just looked at the link from LMP for the Borla axle-back. Man...that's going to be a tuff decision between the Borla and SLP. I wonder what size the Borla tips are going to be. Whoever gets the Borla axleback system, please post pics and video once it's on. I still have about 6 mths or so before I get an SS so I hope I can hear them in person sometime.
I think they are 4.5" outside tips and 4" inside...

the factory SS comes with 3.5" inside and 3.75" outside
__________________
Ltdodge is offline   Reply With Quote
Old 07-27-2009, 09:07 PM   #15
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,066
Looking at the Borla closer compared to the SLP I definately like the way the tips already come attached as apposed to the SLP which require the tips to be clamped on. Not that I'm really complaining but that might be another possible place for an exhaust leak. Nit picky....I know...but they both look like a good system.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 07-27-2009, 09:31 PM   #16
Ltdodge

 
Ltdodge's Avatar
 
Drives: 2008 Z06
Join Date: Apr 2009
Location: Oviedo, Florida
Posts: 893
Quote:
Originally Posted by caverman View Post
Yep...that's the one. Another OP on 5thGen.org said he could definatley feel the difference when he replaced the factory H-pipe for the magnaflow x-pipe. Can't find the post right now but it sounded very promising and for $100 you can't go that wrong.
I found one at JEGS that is more like the Borla setup.....and $65.00

http://www.jegs.com/p/JEGS/JEGS-Narr...30498/10002/-1

__________________
Ltdodge is offline   Reply With Quote
Old 07-27-2009, 11:14 PM   #17
carfansince73

 
carfansince73's Avatar
 
Drives: Carefully
Join Date: Mar 2008
Location: Florida
Posts: 1,030
This does sound good. I can't wait for someone to get one on so they can report that there's hopefully no drone when cruising.

LMP has a good sale too. Will this go lower once the car has been out a while?

Did I read that right, 43lbs in weight savings over stock!!??
__________________
2010 1SS RS, LS3, SIM/Black, painted rally stripes, AAC sidemarkers, Sunroof, B.A. sound sys; 20x9.5 & 20x11 SV1-C5's; Hotchkis Track Pack; Corsa catback; Kooks 1 7/8"; ADM Street; TVS2300 - 548rwhp/512rwtq
1100- 2/18/09; 3800- 6/15/09 VIN#18308; Delivered 6/29/09!!!!! I wonder if the state would allow this vanity plate---> KISSMYSS
carfansince73 is offline   Reply With Quote
Old 08-21-2009, 09:57 PM   #18
ravensjeff
100% Chevy & Harley Man
 
Drives: 650 HP Forged Internals-549 HP rear
Join Date: Feb 2009
Location: Eldersburg,MD
Posts: 2,057
Being installed tomorrow @ 10am. I'll get daughter to do some audio/video
__________________
Forged & Tuned by Lingenfelter!
ravensjeff is offline   Reply With Quote
Old 08-21-2009, 11:03 PM   #19
Andro
NOICE!!! ™
 
Andro's Avatar
 
Drives: Force Fed 427
Join Date: Jan 2009
Location: GOT BOOST?
Posts: 5,216
Cool Vid
__________________
Andro is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:24 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.