|03-25-2014, 02:07 PM||#1|
Drives: 2010 1LT v6 Twin Turbo
Join Date: Jun 2010
Location: Geneva, Ohio
DIY LED Side Marker Kit
Ohio Speed now offers a LED DIY Kit for the 5th gen. Side Marker Lights.
Kits are for those of us who like to work on ours cars and show off a job well done and of course save big bucks doing it ourselves.
DIY Kit Includes:
2 = Amber 40ct. Arrays
2 = Red 40ct. Arrays
American made and mfg. with a lifetime warranty against LED failure.
You will have to split your stock side markers with this kit.
Turn wheels either right or left and it will allow you to get to the 3 T25 (believed) Torx screws holding the inner fender in place in front of the tire. Pull that back and you will see a white tab inside of a black box holding the light in place. Grab a screwdriver, push the tab in and towards the outside of the car. That is the only tab holding the light in place. The front of the marker has a piece that slides into a slot. (Think of how the battery cover of a remote control works)
Open the trunk and remove the 6 cargo net screw/hooks. Pull out the plastic piece they held in place. Pull the carpet down from the sides. There is one pushpin holding the carpet at the top. Once the carpet is pulled down, you will see a black rectangle that is probable 8 inches long and 4 inches tall that has flaps in it in front of where the side markers should be. If you look at the top of it you will see two extensions that click to hold that in place. push those down and carefully push and twist the black piece to negotiate it out. I say careful because I don't know if it can drop. Once that is out of the way you can reach through the hole and feel the rear markers. Theses are held in place the same way the fronts were(ie remote control battery cover) The tabs that you can push in are towards the front of the car.
100% USA Custom made per order.
Please allow 2 to 10 business days for delivery.
PM FOR C5 MEMBERS ONLY PRICING!
|06-30-2014, 09:26 PM||#5|
Drives: 2010 Black 2LT Camaro
Join Date: Apr 2010
I would also like a PM with pricing. Does it have all connectors that will be needed? What did you use to "paint" the outside of the markers?
Order # NXKCRB
2010 Black/Black 2LT with RS package
04-29-2010 - 1100
05-03-2010 - 2000
05-04-2010 - 2500
05-05-2010 - 3000 TPW 05-31-2010
05-06-2010 - 3300
05-20-2010 - 3400
06-02-2010 - 3800 VIN: 2G1FC1EV4A9228305
06-04-2010 - Ready for transport from Oshawa.
06-08-2010 - In-Transit from Oshawa. Railroad Rail # ETTX820674.
06-17-2010 - Delivered
|09-28-2014, 09:33 PM||#9|
Living Life in MPH.
Drives: '14 Black 2LT RS
Join Date: Dec 2013
http://www.ohio-speed.com/p-3795-201...r-diy-kit.aspx here's the link guys. DOES NOT fit 14 it looks like.
Support all LEO
|camaro, led, side marker, sidemarker|