Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Night Owl LED
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis

Suspension / Brakes / Chassis All suspension, brakes and chassis discussions.

Reply
 
Thread Tools
Old 03-25-2014, 10:47 PM   #1
rjames
 
rjames's Avatar
 
Drives: 2012 45th 2ss
Join Date: Aug 2013
Location: Iowa
Posts: 92
Confused on tourque specs. BMR/PEDDERS??

Ok I did my 1" BMR spring kit last week and i am now confused on the specs. In the instructions it has all the specs for the bolts for when timing the bushings. But.... in doing this it seemed to me that the specs were way to light in spec. so i pulled out my pedders tourque spec sheet and they are both different. Pedders says to put an extra 120 deg after initial tq on some of the bolts. Now this seems better to me. as for example the tq spec from bmr for the lower control arm bushings is 32 ft lbs for both bushings, and pedders says it is 85 ft lbs for the inner and 30 ft lbs for the outer with an extra 120 deg. Makes me wonder who to believe?
Any thoughts?

Thanks Rob
__________________
2012 45th M6 Coupe, Stock internals,Cam/springs,ARH 1 7/8 cat delete,Flowmaster american thunder Cat back, 3:91 gears and K&N Cold air kit. 464 RWHP 434 TQ.Acs body kit,Bmr 1" springs,Vfn copo hood going on soon! Tuned by Speed Inc.
rjames is offline   Reply With Quote
Old 03-26-2014, 01:44 AM   #2
JCunningham

 
JCunningham's Avatar
 
Drives: 2012 SIM 2SS/RS
Join Date: Jun 2013
Location: Attica, NY
Posts: 1,996
the Peddlers specs are if you are using new GM bolts. these are torque to yield bolts. The BMR specs are for if you are using the old bolts. Its best to use new bolts. there cheap to buy. The GM bolts stretch on when you degree them.
__________________
2012 2SS/RS M6 SIM, Painted Carbon Flash rally stripes, Elite CC, 3.91 gears, New Era ported TB, OTR, and Dyno Tune, Heritage Grill, Night Fury cam, 25%Fluidampr, Melling 296 Oil pump, Katech CR-5 chain, Cloyes LS2 HD tensioner, PAC 1205x springs and Comp Cams trunions. ARH 1 7/8" LT headers w/cats, TWM full Shifter, BMR sways, trailing arms, toe rods, delrin cradle bushings, BK039 rear control bushings, front bushings. Solo Mach-XL exhaust
JCunningham is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:32 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.