Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
FLOWMASTER
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 08-17-2009, 03:12 PM   #1
Coop

 
Drives: 2010 Camaro 1SS
Join Date: Aug 2009
Location: Lawton/Fort Sill, OK
Posts: 1,633
CAI for 2010 1SS..which one?

Guys is there a list of the manufacturer's who make CAI's for the SS model with price? Was wondering how much the LMR CAI is? Doesn't say on their website or did I miss it.
__________________
2010 Camaro 1SS Inferno Orange Magnusson Supercharger Installed and Tuned by ADM Performance, Roto Fab CAI IOM painted, MBRP Cat Back Exhaust, Barton Industries Short Shifter, Clear Image Headers, Pedders coilovers, BMR Front/Rear sway bars Trailing Arms and End Links, VMax ported TB
Coop is offline   Reply With Quote
Old 08-17-2009, 03:14 PM   #2
thecamaroguy
 
thecamaroguy's Avatar
 
Drives: 2010 Camaro SS/1967 Camaro SS
Join Date: Jul 2008
Location: Kentucky
Posts: 530
I have LMR's...$399 now...but there was a deal for $50 off.

I love my LMR CAI...I would recommend them.
thecamaroguy is offline   Reply With Quote
Old 08-17-2009, 03:38 PM   #3
Van
 
Van's Avatar
 
Drives: 2006 EVO MR - 390 @ wheels
Join Date: Jul 2009
Location: San Antonio
Posts: 384
http://www.camaro5.com/forums/showthread.php?t=14723
__________________
2010 2SS/RS 6spd manual -- Victory Red / Black Leather
1100, Preliminary order accepted 7/27/09
2000, Order accepted by GM 8/13/09
3000, Order accepted by production control 8/18/2009 TPW 9/07/2009
3300, Order scheduled for production 8/24/2009
3400, Order broadcast 9/1/2009
3800, Order produced 9/11/2009
4200, Shipped 9/11/2009
5000, Delivered to the dealer
Van is offline   Reply With Quote
Old 08-17-2009, 06:06 PM   #4
Melson
 
Melson's Avatar
 
Drives: Wild Cherry
Join Date: Nov 2008
Location: Keller, Texas
Posts: 430
You should also talk to Andy at ADM. He has one as well...........and is getting some nice gains..............
__________________

2010 RJT 2SS/RS L99 CAMARO
ARH 1 7/8" LT HEADERS W/ HF CATS
MAGNAFLOW 3" COMP EXHAUST
ADM PERFORMANCE CAI
ADM PERFORMANCE CUSTOM TUNE
ADM PERFORMANCE PORTED THROTTLE BODY
ADM PERFORMANCE TRANS COOLER
3.45 GEARS
BMR TRAILING ARMS
Melson is offline   Reply With Quote
Old 08-17-2009, 06:11 PM   #5
ToddSS
ZZ Motorsports Sales Rep
 
ToddSS's Avatar
 
Drives: 2010 SIM 1SS
Join Date: Jul 2009
Location: moving to Texas
Posts: 149
I would also check out Roto-Fab and New Era.
ToddSS is offline   Reply With Quote
Old 08-17-2009, 08:44 PM   #6
camarossrs2150

 
camarossrs2150's Avatar
 
Drives: abm2ssrs
Join Date: Apr 2009
Location: still out of my mind
Posts: 2,094
lmr for now and maybe vararam when released ..hopefully soon
__________________
[SIGPIC]
camarossrs2150 is offline   Reply With Quote
Old 08-17-2009, 08:46 PM   #7
camarossrs2150

 
camarossrs2150's Avatar
 
Drives: abm2ssrs
Join Date: Apr 2009
Location: still out of my mind
Posts: 2,094
also check out gmpp best looking one so far but not out yet .my opinion only.
Attached Images
 
__________________
[SIGPIC]
camarossrs2150 is offline   Reply With Quote
Old 08-17-2009, 09:22 PM   #8
SShift
 
SShift's Avatar
 
Drives: Only Bowties!
Join Date: Jan 2009
Location: Depths of Hell
Posts: 140
LMR looks like a nice piece.
SShift is offline   Reply With Quote
Old 08-17-2009, 10:23 PM   #9
Roto-fab 1
Account Suspended
 
Drives: 16 Camaro SS w/ Roto-fab CAI
Join Date: May 2009
Location: Arizona
Posts: 2,175
Here's a look at the Roto-fab CAI intake system. It looks good, performs well, sounds great and is very quick and easy to install. No drilling, modifying, relocating components,etc-this intake is made to fit your car properly! The base intake as pictured is $349.95. There are many color combinations available.




Last edited by Roto-fab 1; 08-17-2009 at 10:27 PM. Reason: add price
Roto-fab 1 is offline   Reply With Quote
Old 08-17-2009, 10:46 PM   #10
Late Model Racecraft
 
Late Model Racecraft's Avatar
 
Drives: 98 Camaro Race Car 3.96 @ 202 MPH
Join Date: Mar 2009
Location: Houston, Tx
Posts: 923
Why wait, ours is in stock and ready to ship. Our CAI system was the first on the market. You can view some immitators trying to jump on the band wagaon. You can read other threads to see hp gains and I still stand on trying to lock in a magazine company to do an un bias CAI comparison test to prove ours is the best CAI System on the market bar none! If you have any questions please feel free to email me or just give me a call at the shop. Thanks!



__________________
FIRST C7 Corvette in the 9's
LMR1200HP Twin Turbo C7 Package-9.35@155mph
2 TIME OUTLAW DRAG RADIAL LSX SHOOTOUT CHAMPION 2008/2010
9.47 ZR1 Corvette
FIRST 2010 CAMARO in the 9's
HOME OF THE FASTEST LSx'S IN THE WORLD!!

Late Model Racecraft
713-466-9900
WWW.LATEMODELRACECRAFT.COM
Too many PMs, please call or email instead, thanks!
Late Model Racecraft is offline   Reply With Quote
Old 08-18-2009, 12:06 AM   #11
ADM PERFORMANCE

 
Drives: 2016 CAMARO SS
Join Date: Oct 2008
Location: DfW - Texas
Posts: 4,908
We sold 20 units in 3 days just after announcing these..We gained 18 rwhp and 18 rwtq.

http://www.camaro5.com/forums/showth...ght=adm+intake

We are the only manufacturer that puts the maf/iat sensor in the airbox..isolating it from the engine bays radiant heat.Some may say it tricks the computer into false signals,but it does show an increase in power..PERIOD!(feel free to call me and I can explain or just google and you will see why)

I have a few of our competetors products that we will be testing over the next few weeks,and yes I will lye, cheat, and steal and whatever else it takes to make sure ours comes out better than all the rest - JUST KIDDING!


There is a very good read here about Intakes in general,If your not sure about them just read -

http://www.camaro5.com/forums/showthread.php?t=33172
&highlight=hot+air+intakes+kenne


Andy
www.admperformance.com
214-228-8782
ADM PERFORMANCE is offline   Reply With Quote
Old 08-18-2009, 12:45 AM   #12
JDP Motorsports

 
JDP Motorsports's Avatar
 
Drives: 2011 Camaro SS/ 2016 Camaro SS
Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,412
Airaid intakes from JDP Motorsports

JDP Motorsports will have Airaid intakes in a couple of weeks. Here is some info. The composite intake tube is important to reduce heat soak. I used to work for K&N and they composite intakes always made more HP and were much more consistent!

Click on the image to go to our website.


V6 System but similar


AIRAID® Intake Systems are computer designed to give your engine maximum air flow, which means more horsepower, torque and improved performance. Every AIRAID intake system is dyno tested and tuned to provide maximum performance and efficiency. By utilizing computer-aided design, AIRAID Intake Systems offer unmatched fit, finish and lifetime warranty. Each AIRAID® intake provides superior air filtration, since it comes with an AIRAID Premium Filter featuring our exclusive filter technology.

AIRAID® Premium Filters are constructed using the finest materials available today. All AIRAID® Premium Filters utilize a hand-poured urethane body that won’t crack, curl or shrink like other rubber or plastisol units used by our competitors. Filtration performance is second to none, and at No Extra Cost, thanks to the combination of our proprietary material and multiple cotton gauze layers. All AIRAID® Premium Filters are 100% washable, reusable and feature our Lifetime “No-Hassle” Warranty.

Please feel free to call or email us anytime! We have specials for Camaro5 members and we've already taken a lot of pre-orders!! Please PM me for special pricing.



JP
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Motorsports is offline   Reply With Quote
Old 08-18-2009, 12:52 AM   #13
ADM PERFORMANCE

 
Drives: 2016 CAMARO SS
Join Date: Oct 2008
Location: DfW - Texas
Posts: 4,908
Quote:
Originally Posted by JDP Motorsports View Post
JDP Motorsports will have Airaid intakes in a couple of weeks. Here is some info. The composite intake tube is important to reduce heat soak. I used to work for K&N and they composite intakes always made more HP and were much more consistent!

Click on the image to go to our website.


V6 System but similar


AIRAID® Intake Systems are computer designed to give your engine maximum air flow, which means more horsepower, torque and improved performance. Every AIRAID intake system is dyno tested and tuned to provide maximum performance and efficiency. By utilizing computer-aided design, AIRAID Intake Systems offer unmatched fit, finish and lifetime warranty. Each AIRAID® intake provides superior air filtration, since it comes with an AIRAID Premium Filter featuring our exclusive filter technology.

AIRAID® Premium Filters are constructed using the finest materials available today. All AIRAID® Premium Filters utilize a hand-poured urethane body that won’t crack, curl or shrink like other rubber or plastisol units used by our competitors. Filtration performance is second to none, and at No Extra Cost, thanks to the combination of our proprietary material and multiple cotton gauze layers. All AIRAID® Premium Filters are 100% washable, reusable and feature our Lifetime “No-Hassle” Warranty.

Please feel free to call or email us anytime! We have specials for Camaro5 members and we've already taken a lot of pre-orders!! Please PM me for special pricing.



JP

Once they have them available,I will have these as well....Kinda like us selling Kooks,ARH,Stainlessworks....enough room for everybody.

Andy
ADM PERFORMANCE is offline   Reply With Quote
Old 08-18-2009, 01:19 AM   #14
JDP Motorsports

 
JDP Motorsports's Avatar
 
Drives: 2011 Camaro SS/ 2016 Camaro SS
Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,412
Quote:
Originally Posted by ADM PERFORMANCE View Post
Once they have them available,I will have these as well....Kinda like us selling Kooks,ARH,Stainlessworks....enough room for everybody.

Andy


PM sent!
__________________

Click HERE to send me a PM | Sales@jdpmotorsports.com | www.jdpmotorsports.com | 801-545-4215
JDP Motorsports is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Possible to add Homelink / Auto Dimming Mirror to 1SS shiftz33 Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum 113 11-07-2014 12:12 AM
"Resetting" the MAF vs. CAI install ... where's the hp coming from? LS 1st gen Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 4 07-03-2009 09:42 AM
Would like some input between 2LT and 1SS mc4679 5th Gen Camaro SS LS LT General Discussions 14 05-07-2009 11:47 PM
LS3 goes 11`s Bonestock! GMRULZ Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 28 12-08-2008 10:10 PM


All times are GMT -5. The time now is 03:01 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.