Documenting the PEDDERS CAMARO BUILD

[Info@PeddersUSA.com]

Pedders Gets ProCharged

Pete shipped the Pedders Camaro off to ProCharger last week. They will be using the bone stock engine and exhaust to create a final tune to ship with the retail ready kit. Because the Pedders Camaro gets around to many shows and on the web we will have our blower and hardware highly polished. Is is SOP for us, looks great but takes a lot of work to stay that way.

PEDDERS CAMARO ON THE SHOWROOM

This is the first step in our build. When we get it back it will get a full Revolution body kit, 305/30 19 Bridgestone RE11 mounted on the lightest weight ZX3 wheel that Forgeline can make including titanium hardware. We will install headers, exhaust cutouts, chambered exhaust, electric water pump, header coating, oil coolers, special brake pads and a custom tune. Then the Pedders eXtreme Track Kit.When we are done we expect to have 600 RWHP on a dyno certified accurate for SCCA work. We should be able to pull over 1G on the skid pad and expect to run laps faster than a C6 Z06 stock Corvette.

Pete picks up the Pedders ProCharged Camaro from ATI this Friday and will drive it back to Michigan. By the time they get to Backstreet Performance for the final tune he will have about 4,000 miles on it or put another way close enough to break it in and get good numbers and performance on the street and dyno. This is just the start of the thread. We will get pictures of the Pedders Camaro starting this weekend and throughout the build. It will debut at the Berger All Chevy Show on the 29th of this month.

Revolution Body Kits
bodydrop45@aol.com

Back Street Performance
650 W. Smith Rd. Unit 12
Medina, OH 44256
http://www.backstreetper.com
Rich Johnson
440.655.7677
rich@backstreetper.com

Berger Chevrolet
2525 28th Street SE
Grand Rapids, MI, 49512
616) 828-5916
http://www.bergerchevrolet.com/

thanks,
mike
dms__________________

[ShnOmac]

Got my attention!

[2SSRS]

I know it will be drop dead fast and look like a killer with Revolution Body Kits.

[Info@PeddersUSA.com]

Originally Posted by 2SSRS

I know it will be drop dead fast and look like a killer with Revolution Body Kits.

RevolutionSS is a true artist! I have sent him an invitation to show us what he is going to do to the Camaro. There is stuff we are doing to the Pedders Camaro that we are not even talking about yet It is great to have a test car for sure! We are still working on a 700rear hp motor that weill require a motor switch. The 600hp motor is a interrum test setup.

Thanks
mike
dms

[JusticePete]

I'll get the baseline dyno numbers up along with the initial ProCharger numbers posted as soon as possible.

[ShnOmac]

Originally Posted by JusticePete

I'll get the baseline dyno numbers up along with the initial ProCharger numbers posted as soon as possible.

[Info@PeddersUSA.com]

PETE FLEW IN TONIGHT TO PICK UP IS CAMARO WITH THE PRO CHARGER BLOWER ON IT. NEXT TO BACK STREET PERFORMANCE FOR A BUNCH OF UPGRADES!

THANKS
MIKE
DMS