Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 08-18-2009, 10:14 AM   #1
Scott@Bjorn3D


 
Scott@Bjorn3D's Avatar
 
Drives: Kami, 2013 2SS LS3 Luvin
Join Date: Oct 2008
Location: Eufaula, Alabama
Posts: 6,360
Send a message via MSN to Scott@Bjorn3D
Who All is thinking of getting ADM CAI?

I am really thinking of getting this one from Andy. I like that the MAF is actually inside the box and right behind the filter.

What are others thoughts on this intake? I just sold some ads for my website and it will cover getting something like this for the car. I was thinking of the Varamm or how ever you spell it one but the GM engineers said moving the raditior good by warranty for sure.

Let me know your thoughts!!

Thanks

Scott

PS We go to the radiation doctor tomorrow for Steph. He will have all the results of the test ran yesterday on her and will give us the game plan. Good thing is he and this hospital take our insurance where the other one did not on alot of stuff.
Scott@Bjorn3D is offline   Reply With Quote
Old 08-18-2009, 10:23 AM   #2
TXISKING
 
TXISKING's Avatar
 
Drives: '13 ZL1 725 rwhp / 700 ft lb tq
Join Date: Jul 2009
Location: Andrews, Texas
Posts: 164
I'll be praying for good news for your family.
__________________
'13 Black Manual trans , Heads, Cam, Injectors, Ported Snout, Vmax throttle body, RotoFab, Headers, No Cats, 9.55 lower pulley, D3PE heat exchanger, - 725 rwhp/700 tq
TXISKING is offline   Reply With Quote
Old 08-18-2009, 10:26 AM   #3
Doc
Dances With Mustangs
 
Doc's Avatar
 
Drives: 2010 1SS/RS MT
Join Date: May 2009
Location: USA
Posts: 3,635
Interesting info about the warranty and moving the radiator. For me it's a toss-up between the Vara and ADM's. I'm waiting to see the final results and price. Theoretically the Vara has more potential, but the guys at ADM seem to be quite talented and skilled at working with performance and I liked what I've seen so far; a lot.

If all else is equal, the warranty issue would be the decider for me. Was it the GM team that came down to check your car that told you that?

Oh yes and I did in fact put in some prayers for Steph.
__________________

Blue Angel is here!!
1SS/RS LS3 M6 IBM
Doc is offline   Reply With Quote
Old 08-18-2009, 10:28 AM   #4
Melson
 
Melson's Avatar
 
Drives: Wild Cherry
Join Date: Nov 2008
Location: Keller, Texas
Posts: 430
I will be getting the one from ADM in the next week or so..........
__________________

2010 RJT 2SS/RS L99 CAMARO
ARH 1 7/8" LT HEADERS W/ HF CATS
MAGNAFLOW 3" COMP EXHAUST
ADM PERFORMANCE CAI
ADM PERFORMANCE CUSTOM TUNE
ADM PERFORMANCE PORTED THROTTLE BODY
ADM PERFORMANCE TRANS COOLER
3.45 GEARS
BMR TRAILING ARMS
Melson is offline   Reply With Quote
Old 08-18-2009, 10:29 AM   #5
Croathlete
Danny
 
Croathlete's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Nov 2007
Location: NYC
Posts: 1,655
Send a message via AIM to Croathlete
Waiting on Vararam to compare.
__________________
2SS/RS CGM with black rally stripes

DON_RAFA describing my Noweeds cutouts - "Very Strong. When I couldn't see you I still heard you. Sounds like your car is pissed at the world."

Please help me fight back by supporting me in the 2010 American Cancer Society's Relay for Life. Every little bit helps. Click here for more information. Thank you to those that have donated!
Croathlete is offline   Reply With Quote
Old 08-18-2009, 11:10 AM   #6
thecamaroguy
 
thecamaroguy's Avatar
 
Drives: 2010 Camaro SS/1967 Camaro SS
Join Date: Jul 2008
Location: Kentucky
Posts: 530
Won't moving the MAF cause bad readings?
thecamaroguy is offline   Reply With Quote
Old 08-18-2009, 11:26 AM   #7
Scott@Bjorn3D


 
Scott@Bjorn3D's Avatar
 
Drives: Kami, 2013 2SS LS3 Luvin
Join Date: Oct 2008
Location: Eufaula, Alabama
Posts: 6,360
Send a message via MSN to Scott@Bjorn3D
Quote:
Originally Posted by Doc View Post
Interesting info about the warranty and moving the radiator. For me it's a toss-up between the Vara and ADM's. I'm waiting to see the final results and price. Theoretically the Vara has more potential, but the guys at ADM seem to be quite talented and skilled at working with performance and I liked what I've seen so far; a lot.

If all else is equal, the warranty issue would be the decider for me. Was it the GM team that came down to check your car that told you that?

Oh yes and I did in fact put in some prayers for Steph.
Yep GM guys did. That would really be changing how the car is ment to be cooled and could cause warranty issues.
Scott@Bjorn3D is offline   Reply With Quote
Old 08-18-2009, 11:31 AM   #8
chevyboy221
 
chevyboy221's Avatar
 
Drives: 2011 black w/IOM stripes
Join Date: Aug 2009
Location: Sarasota FL
Posts: 63
I will be building rpepka's car and we got all his parts from andy at adm he is probably the nicest and easyest guy to work with if talk to him on the phone he talks to you like a human not a 2yr old i would encourage every one to buy from adm his stuff is made with quality and looks in mind he is great and im sure his cai will be one of the best on the market!!!!
chevyboy221 is offline   Reply With Quote
Old 08-18-2009, 03:12 PM   #9
Bentley78
Rice Cooker
 
Bentley78's Avatar
 
Drives: Avalanche Z/71, 2010 Camaro2SS
Join Date: Jun 2008
Location: Hawaii/Phoenix
Posts: 593
What you talking bout?! Already ordered my ADM CAI, hopefuly they ship them out this week. Nothing seems to come close in design and build quality. Quite genious on there part for placing the MAF where they did.....cant wait to install it.
Bentley78 is offline   Reply With Quote
Old 08-18-2009, 03:26 PM   #10
Gen5SSRS
 
Gen5SSRS's Avatar
 
Drives: Black 2010 1SS RS,
Join Date: Jul 2009
Location: Edgewood, NM
Posts: 52
Will have to do a comparison with Vararam. Don't care much about warranty issue, as I doubt my dealer will give me grief. I like the looks of the ADM more and if the performance and price is close, I will choose the ADM rather than the hassle of installing the Square-pants butt look.

PS: I will say a prayer for Stephanie
Gen5SSRS is offline   Reply With Quote
Old 08-18-2009, 04:04 PM   #11
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,112
As of now I would go ADM for sure.

I haven't seen the price but I would bet it will be within reason of the others. I like the design of having the MAF in the box and I know Andy knows his stuff.

It's even better for me because his shop is only about 15 min from me. I'm sure I'll be doing most my performance stuff with him.

I think LMR would be a good second choice. But I don't think LMR's current design will be able to touch ADM's race CAI since there will be a scoop to make it more of a RAM Air type CAI. It would be nice to do a dyno comparison between all three...LMR, ADM street, and ADM race.

Whoever gets their ADM installed first please post some pics. Preferrable pics or video during the whole install.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 08-18-2009, 04:10 PM   #12
Crowley
Okie doke
 
Crowley's Avatar
 
Drives: 2012 GT500
Join Date: Sep 2008
Location: McKinney Texas
Posts: 3,569
ADM all the way here .. .. As of yesterday, here was my car from him:

__________________
Crowley is offline   Reply With Quote
Old 08-18-2009, 04:19 PM   #13
caverman


 
caverman's Avatar
 
Drives: '69 SS Convertible
Join Date: May 2009
Location: DFW, TX
Posts: 7,112
SWEETNESS......

Can't wait to see this finished project. Surely you'll be putting on Andy's CAI.

When that things done you need to take it up to the Denton track and get some good time slips. Let me know if you go and I'll bring a video camera!

BTW: I'm assuming the lighting is jacking with the color on your car but isn't yours an SIM? Looks like some kind of teal or something in the pic.

Edit: NM...I see it's some kind of protection plastic he put around your car.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal
caverman is offline   Reply With Quote
Old 08-18-2009, 06:30 PM   #14
GMRULZ

 
GMRULZ's Avatar
 
Drives: 2010 SS & 2008 C6
Join Date: Mar 2008
Location: VA
Posts: 1,823
Weighing this one vs the Vararam. Depends on final numbers, price and what will work or not work w/ the upcoming Whipplecharger. I don`t mind changing the connection tubing or modifying said tubing, but one of these might not work at all.
__________________
2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter.

Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s!

Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..
GMRULZ is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ADM Performance Stage 1 Cam/Downpipes package ADM PERFORMANCE V8 Bolt-Ons & Tunes 19 09-21-2009 08:08 PM
CAI Comparison at LMR Dyno day mlee Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 41 08-17-2009 10:31 PM
CAI question Rob53 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 7 08-03-2009 12:08 PM
"Resetting" the MAF vs. CAI install ... where's the hp coming from? LS 1st gen Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 4 07-03-2009 08:42 AM
LS3 goes 11`s Bonestock! GMRULZ Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 28 12-08-2008 09:10 PM


All times are GMT -5. The time now is 12:22 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.