Headlight Armor Lighting Protection and Smoked Taillight Kits Available

[woolfman72]

I got mine installed today ... Looks great!

[SSMOKINHOT]

Originally Posted by woolfman72

I got mine installed today ... Looks great!

Looks AWESOME woolfman!!

[HeadlightArmor]

Originally Posted by TaylorRyanSS

I know you guys say not to use aftermarket lighting with the headlight armor because it can melt it. If I did the foglight blackouts with these fog lights: http://www.automotivelightstore.com/P13W.aspx would that cause any problems?

I looked at the link - for LED plug ins - they should not be a problem as most LED's I am aware of run cooler on the front side than a halogen or standard incandescent bulbs. The main issue with heat is to the adhesive. We have tested the adhesive to applied surface temps just over 200 F without issue. Some 'hi output' bulbs run way to hot - producing a lot more incremental heat than incremental light. Get the lens too hot and the adhesive we use will burn. This is not an issue with stock bulbs, or LED's that we are aware of.

We have a lot of Porsche 997 customers that protect the bumper LED bar without issue.

[HeadlightArmor]

Originally Posted by SSMOKINHOT

Looks AWESOME woolfman!!

+2, Looks great! Thanks for posting!

[TaylorRyanSS]

Originally Posted by HeadlightArmor

I looked at the link - for LED plug ins - they should not be a problem as most LED's I am aware of run cooler on the front side than a halogen or standard incandescent bulbs. The main issue with heat is to the adhesive. We have tested the adhesive to applied surface temps just over 200 F without issue. Some 'hi output' bulbs run way to hot - producing a lot more incremental heat than incremental light. Get the lens too hot and the adhesive we use will burn. This is not an issue with stock bulbs, or LED's that we are aware of.

We have a lot of Porsche 997 customers that protect the bumper LED bar without issue.

Ok thanks! Do you have any pics of the fog light stealth smoke with the lights on?

[HeadlightArmor]

Sorry for the delay, sorry no photos available with the lights on. The Stealth Smoke on the DRL's will block most of their output though.

[HeadlightArmor]

For those who missed it, headlight Armor's March Photo Contest Finalists are up. One will win $75 for our choice, and the one with the most 'likes' will win the $25 Fan Choice Prize, tell your friends. Click "Like" on Your Favorite Photo to Vote for Your Fan Favorite by 7PM Pacific 10PM Eastern on April 8, 2011

Click to vote for your favorite.

Have something from Headlight Armor installed? Need some extra Cash? Get out and take some interesting photos, and Enter April's Contest!

Thanks to all those who entered and good luck to the finalists!

[kbeast]

Just placed my order. Do you know if I will get them in before the weekend?

[HeadlightArmor]

kbeast, thanks for the order. It is going out today, so you should see it by Thursday or maybe Friday.

[HeadlightArmor]

We have a few Microfiber towel specials going on now, just in time for Spring Cleaning!



Soft medium weight microfiber with a medium pile and a fully sewn edge. Measures ~16" x 16" (40cm x 40cm).

Available as singles $1.75

and

Available as 10 Packs $13.95

We also have our Premium Suede like Microfiber towels. Professional grade microfiber detail cloths. Measures ~15" x 15" (38cm x 38cm). Highly recommended for DIY installation of all of our Headlight Protection kit and Smoked Taillight kits. (A two pack is included for free on all lighting protection kit orders over $99)



Available as a 12 Pack $39.95

All are great on their own or as a way to hit the Free Domestic Priority Shipping for orders over $75

[HeadlightArmor]

Congratulations to an Audizine member for his winning photo!


The winner picks up $75 for being selected Headlight Armor's First Place and an additional $25 for being the Fan Choice in our Facebook voting!

Getting some nice entries so far this month, have you submitted yours?

A few things to keep in mind:

• Size - minimum size is 900 px by 675 px.
• Aspect Ratio - All photos will be cropped to fit a 4:3 standardized template

[HeadlightArmor]

Headlight Armor's April Photo Contest Finalists are up. One will win $75 for our choice, and the one with the most 'likes' will win the $25 Fan Choice Prize, tell your friends. Click "Like" on Your Favorite Photo to Vote for Your Fan Favorite by 7PM Pacific 10PM Eastern on May 8, 2011

Click to vote for your favorite.

Have something from Headlight Armor installed? Need some extra Cash? Get out and take some interesting photos, and Enter May's Contest!

Thanks to all those who entered and good luck to the finalists!

Chevrolet Camaro RS - Headlight Armor Smoke Taillight & Side Marker Kit


Ford F150 - Headlight Armor HID Blue Headlight, Fog Light, and Aftermarket Driving Light Protection Kits - Some on the bike too!


Kia Forte Sedan - Headlight Armor Stealth Smoke Taillight Kit

[CamaroHutch]

That RJT SS is mine... Vote for me!

[HeadlightArmor]

CamaroHutch, the US Flag reflection in the window was a nice touch Sorry for needing to crop it horizontal to fit our template.

[HeadlightArmor]

Happy Mother's Day to all the Mom's out there! Hope you have a great day!

[CamaroHutch]

Yeah I figured you might have to crop it, but hey, it still looks good ;D

[HeadlightArmor]

Congratulations to a Camaro5 forum member for winning Headlight Armor's first place in the April install photo contest, and on winning the Facebook Fan choice! Great photo,
thanks to all those who entered.

Chevrolet Camaro RS - Headlight Armor Smoke Taillight & Side Marker Kit

[rdblan2]

Looks like mine shipped today. Apparently, it was sent signature required. Really? Sigh. Now I have to take an hour off work to go pick up a $40 package.

[HeadlightArmor]

Yes all orders more than a set of fog light protection kits are sent signature as the CC companies require a signature. Anybody placing an order has the option of sending it to their office. If doing so just make sure the billing address and shipping address are in the correct spot - a lot of people tend to mix it up and have a declined charge attempt.

[HeadlightArmor]

Adding some additional customer photos to the site today including this one

Headlight Armor Smoke front turn signals and Light Smoke Headlight Protection Kit in direct sun:

[HeadlightArmor]

Headlight Armor Smoke Headlight, Signal Lights, Fog Light Protection Kits:

[HeadlightArmor]

Chevrolet Camaro RS with Headlight Armor Smoke Taillight, Side Markers, and Reverse Lights - Direct Sun



Smoke Camaro in the shade

[modawg2k]

Any update on the brake light for the vert? I have the front and back lights all in my shopping cart on the website ready to ring out but this will leave my brake light still a regular red color compared to the darkest tint that I want.

[HeadlightArmor]

We had hoped to take a look at one but have yet to find one. Hopefully we will be able to take a look at adding it in June.

[ChadG]

Originally Posted by ChadG

I picked up some Plexus at the local Harley shop, thank you for the tip. I am doing the install for the entire car in sections as my two-year old son allows me to have the time.

I did my side markers a few weeks ago and I did them wet. It took a couple of weeks but now all of the bubbles have dissipated and they look great.

I did the front signal markers and headlights today and have some general comments.

1. The signal markers were a little tedious to get under the grill and floated correctly but overall were fairly easy to install and look fantastic.

2. The headlight pieces were considerably more involved. The pieces were about 1/2" too short in the vertical direction. I heated the material using a hair dryer and stretched it considerably but in the end I still have about 1/4" of the upper part of the headlight not covered. This is not a big deal because you have to literally stoop in front of the car and look upward into the grill to see this.

3. With the headlights off they look AMAZING. There are no noticeable bubbles with the lights off. With the headlights on; however, there is considerable hazing in the light which I assume will go away over time as the adhesive sets and cures and the vinyl shrinks.

Here are some pictures on my install, you can see the hazing that I mentioned in the pictures with the headlights on. Please let me know what you think.

So checking in a year after installation. The side marker, reverse light and tail light vinyl has held up very well and still looks as good as the initial install. I keep the vehicle very clean and clean the vinyl with Plexus for maintenance. The headlight and turn signal vinyl; however, is starting to separate and form small bubbles around the edges. Is this normal, and is there anything that can be done to fix it? Once I get the car cleaned up I'll take some photos and post.