Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
HAVOC
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 10-18-2009, 07:41 PM   #1
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,785
ADM Air Scoop Installed Pic

I wanted to show all here our Intake scoop location.

I also wanted to make mention that it could work with other Intake brands currently on the market that pull air from underneath.







Andy

Last edited by ADM PERFORMANCE; 10-19-2009 at 08:37 PM.
ADM PERFORMANCE is online now   Reply With Quote
Old 10-18-2009, 07:52 PM   #2
Carlos Garza
 
Carlos Garza's Avatar
 
Drives: 2010 Camaro SS RS
Join Date: May 2009
Location: USA
Posts: 236
It looks great, but I would like to see more picks if possible.

Thanks
Carlos Garza is offline   Reply With Quote
Old 10-18-2009, 07:56 PM   #3
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,785
Quote:
Originally Posted by Carlos Garza View Post
It looks great, but I would like to see more picks if possible.

Thanks

There is not much more to take pictures of other than underneath.

Andy
ADM PERFORMANCE is online now   Reply With Quote
Old 10-18-2009, 07:58 PM   #4
Crowley
Okie doke
 
Crowley's Avatar
 
Drives: 2012 GT500
Join Date: Sep 2008
Location: McKinney Texas
Posts: 3,770
Quote:
Originally Posted by ADM PERFORMANCE View Post
There is not much more to take pictures of other than underneath.

Andy
Thanks for posting this Andy .. so it hits the scoop and forces more air up into the intake housing right (that is why there isn't much more to it)?

Crowley
__________________
Crowley is offline   Reply With Quote
Old 10-18-2009, 08:05 PM   #5
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,785
Quote:
Originally Posted by Crowley View Post
Thanks for posting this Andy .. so it hits the scoop and forces more air up into the intake housing right (that is why there isn't much more to it)?

Crowley
Exactly.

It meets the backside of the lower grill vents-top 1.Moves a constant source of fresh air to the bottom of the filter.In other words our airbox gets a constant supply of fresh air ....alot at speed!

Andy
ADM PERFORMANCE is online now   Reply With Quote
Old 10-18-2009, 08:13 PM   #6
Crowley
Okie doke
 
Crowley's Avatar
 
Drives: 2012 GT500
Join Date: Sep 2008
Location: McKinney Texas
Posts: 3,770
Quote:
Originally Posted by ADM PERFORMANCE View Post
Exactly.

It meets the backside of the lower grill vents-top 1.Moves a constant source of fresh air to the bottom of the filter.In other words our airbox gets a constant supply of fresh air ....alot at speed!

Andy
What I like about this too is that unless you are basically under water, there isn't much of a chance you can suck water in since the filter is still up in the engine bay

Crowley
__________________
Crowley is offline   Reply With Quote
Old 10-18-2009, 08:14 PM   #7
monza66mo
Driving daily
 
monza66mo's Avatar
 
Drives: 2SS/RS L99 SIM
Join Date: May 2009
Location: Missouri
Posts: 75
Adam - I didn't see this scoop on your website. Is it available for purchase yet? From the pics here, it looks like a lot of stuff was removed. How hard is the install (i.e. remove front clip)?
__________________
Art in Missouri
2SS/RS (delivered 7/29 vin 123496)
monza66mo is offline   Reply With Quote
Old 10-18-2009, 08:26 PM   #8
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,785
No need to remove the Front end of the car...These pics however were with the front end removed.Only thing you remove is the washer bottle and lines,Fender liner in the wheel well for access.

It bolts to the Washer bottle location and horn bolt.

Hardest part is cutting the plastic..and that is pretty fast if you have an air saw.

Video's here - http://s281.photobucket.com/albums/k...maro%20Intake/


Andy
ADM PERFORMANCE is online now   Reply With Quote
Old 10-18-2009, 09:17 PM   #9
GMRULZ

 
GMRULZ's Avatar
 
Drives: 2010 SS & 2008 C6
Join Date: Mar 2008
Location: VA
Posts: 1,823
Thanks Andy, that gives a good visual of what it looks like installed.
__________________
2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter.

Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s!

Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..
GMRULZ is offline   Reply With Quote
Old 10-19-2009, 01:30 PM   #10
BLACK10

 
BLACK10's Avatar
 
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60'
Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 5,011
very nice
BLACK10 is offline   Reply With Quote
Old 10-19-2009, 03:59 PM   #11
monza66mo
Driving daily
 
monza66mo's Avatar
 
Drives: 2SS/RS L99 SIM
Join Date: May 2009
Location: Missouri
Posts: 75
Quote:
Originally Posted by monza66mo View Post
Adam - I didn't see this scoop on your website. Is it available for purchase yet?

So... when are we going to be able to buy it?
__________________
Art in Missouri
2SS/RS (delivered 7/29 vin 123496)
monza66mo is offline   Reply With Quote
Old 10-19-2009, 04:49 PM   #12
Michael_Js
SoCal C5 Family Member
 
Michael_Js's Avatar
 
Drives: 2010 Camaro SS/RS - Black w/IOM; 6M
Join Date: Jul 2009
Location: San Diego, CA, USA
Posts: 5,317
Send a message via AIM to Michael_Js Send a message via MSN to Michael_Js
Bump

And, where does the washer bottle & lines relocate to?
__________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~
2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; Subthump; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;
Michael_Js is offline   Reply With Quote
Old 10-19-2009, 04:50 PM   #13
Sack Rat 2SS

 
Sack Rat 2SS's Avatar
 
Drives: Silver SS/RS, Man 6
Join Date: Apr 2009
Location: DFW area, Texas
Posts: 825
They are available now. I am going to install mine when I have my car on a lift to change the stabilizer bars and springs to lower one inch overall. At that time I will take off the left front wheel and fender liner and trim the plastic front facia to permit air to enter the ADM scoop which feeds up into the airbox and into the filter. This is where the washer bottle WAS located. Eight or nine fasteners to totally remove the liner in like five minutes.
__________________
Silver 2SS/RS Man/6
CTS-V front 6-Piston Calipers,
ADM Dual Fuel Delivery
GM 3.91 Rear Gears
Sack Rat 2SS is offline   Reply With Quote
Old 10-20-2009, 06:24 AM   #14
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,785
Yes we have inventory and yes we can ship within 24 hrs.

Andy
ADM PERFORMANCE is online now   Reply With Quote
Old 10-20-2009, 07:21 AM   #15
Michael_Js
SoCal C5 Family Member
 
Michael_Js's Avatar
 
Drives: 2010 Camaro SS/RS - Black w/IOM; 6M
Join Date: Jul 2009
Location: San Diego, CA, USA
Posts: 5,317
Send a message via AIM to Michael_Js Send a message via MSN to Michael_Js
Andy, where does the washer bottle relocate to? Does this only work with the Race CAI? I already have the street CAI installed...

Thanks...
__________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~
2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; Subthump; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;
Michael_Js is offline   Reply With Quote
Old 10-20-2009, 08:25 AM   #16
MSG'

 
MSG''s Avatar
 
Drives: 2010 1SS Camaro
Join Date: Aug 2009
Location: Elgin, SC
Posts: 835
wish people wouldnt use photobucket, because i cant see it at work1!!!! lol
MSG' is offline   Reply With Quote
Old 10-20-2009, 09:04 AM   #17
monza66mo
Driving daily
 
monza66mo's Avatar
 
Drives: 2SS/RS L99 SIM
Join Date: May 2009
Location: Missouri
Posts: 75
Quote:
Originally Posted by Michael_Js View Post
Andy, where does the washer bottle relocate to? Does this only work with the Race CAI? I already have the street CAI installed...

Thanks...
Yeah, same here. I have the street version and would like to add just the scoop if possible.
__________________
Art in Missouri
2SS/RS (delivered 7/29 vin 123496)
monza66mo is offline   Reply With Quote
Old 10-20-2009, 09:09 AM   #18
Sack Rat 2SS

 
Sack Rat 2SS's Avatar
 
Drives: Silver SS/RS, Man 6
Join Date: Apr 2009
Location: DFW area, Texas
Posts: 825
Not for sure but you could buy the scoop seperate along with the race lid which does not have 2 inch hole for washer bottle. OR, buy the scoop only and find a black rubber plug to seal off the hole in the street lid. My 2 cents.
__________________
Silver 2SS/RS Man/6
CTS-V front 6-Piston Calipers,
ADM Dual Fuel Delivery
GM 3.91 Rear Gears
Sack Rat 2SS is offline   Reply With Quote
Old 10-20-2009, 09:28 AM   #19
Michael_Js
SoCal C5 Family Member
 
Michael_Js's Avatar
 
Drives: 2010 Camaro SS/RS - Black w/IOM; 6M
Join Date: Jul 2009
Location: San Diego, CA, USA
Posts: 5,317
Send a message via AIM to Michael_Js Send a message via MSN to Michael_Js
Quote:
Originally Posted by Sack Rat 2SS View Post
Not for sure but you could buy the scoop seperate along with the race lid which does not have 2 inch hole for washer bottle. OR, buy the scoop only and find a black rubber plug to seal off the hole in the street lid. My 2 cents.
If that works, where does the washer bottle go??
__________________
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~
2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; Subthump; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;
Michael_Js is offline   Reply With Quote
Old 10-20-2009, 09:34 AM   #20
DrVonkle
 
DrVonkle's Avatar
 
Drives: 2010 Camaro 2SS/RS
Join Date: Oct 2009
Location: SoCal
Posts: 247
Looks great
DrVonkle is offline   Reply With Quote
Old 10-20-2009, 02:09 PM   #21
GMRULZ

 
GMRULZ's Avatar
 
Drives: 2010 SS & 2008 C6
Join Date: Mar 2008
Location: VA
Posts: 1,823
Quote:
Originally Posted by Michael_Js View Post
If that works, where does the washer bottle go??
For me it went into the attic...

All kidding aside you would have to bu an aftermarket universal tank & pump setup to continue to use your squirters.
__________________
2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter.

Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s!

Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..
GMRULZ is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hot air Intakes -By Kenne bell ADM PERFORMANCE Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 66 02-08-2011 08:33 PM
List of Intakes that will work with the TVS-2300 MagnaCharger JJ2010 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 26 03-19-2010 02:11 AM
AirAid Cold Air Intake anyone? Flynnaz Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 12 01-01-2010 09:05 PM
Pic Request: Front Liscense Plate Installed len56 Camaro Photos | Spyshots | Video | Media Gallery 8 07-25-2009 08:13 PM
Intake/ Air Cleaner observations and thoughts... (?V6/V8?) radz28 5th Gen Camaro SS LS LT General Discussions 27 01-23-2009 08:14 PM


All times are GMT -5. The time now is 09:39 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.