Sidepipes? - Camaro Forum - 2011 Camaro 2010 Camaro / Camaro Z28 SS Forums

Altered · 10-21-2009, 09:58 AM

BOBSS · 10-21-2009, 06:16 PM

YEAH!

I need to do that
Do you have some sort of support just prior to the outlet?

Indpowr · 10-21-2009, 06:18 PM

So do you still have rear exhaust as well? I think side exhaust built into the sideskirts would look killer.

2SSRS · 10-21-2009, 06:25 PM

Now that is old school looks like you got cut outs to the side pipes and the OEM pipes from there, Nice

Altered · 10-22-2009, 07:30 AM

The system consists of ARheaders, QTP Oval cutouts and factory mufflers. Sounds good going through the factory mufflers then sounds real good when the dumps are open and going through the side pipes. They have one bracket at the trans tunel support and are very secure. Still plenty of ground clearance on a non lowered car for speed bumps and what not. No rattles, I wrapped the entire pipe also because it does go along the fuel lines and under the tanks. The fuel lines also have a heat sleave on them.

2SSRS · 10-22-2009, 09:55 AM

Congrats as that looks good.

wrek · 10-22-2009, 09:59 AM

That looks awesome... wish I could get it done as well!

Altered · 10-22-2009, 03:55 PM

I could make some kits up. Would come with everything you need. You would have to have an exhaust shop weld to the exhaust though.

BumbleDs · 10-22-2009, 04:00 PM

Ditto, Im a fan!

metaphysician · 10-22-2009, 04:24 PM

Awesome! Can we see a shot further back to get an idea of how it fits in the whole side profile of the car?

chevyss · 10-22-2009, 04:30 PM

Cost of the kits??

BOBSS · 10-22-2009, 06:00 PM

I have all but the side pipes. what would those cost me?

Altered · 10-22-2009, 07:22 PM

wrek · 10-22-2009, 07:42 PM

Quote:

Originally Posted by Altered

I could make some kits up. Would come with everything you need. You would have to have an exhaust shop weld to the exhaust though.

Give us a price

or just give us a list of parts..

2SSRS · 10-22-2009, 07:43 PM

Can i ask how hard is the install of the QTP Oval cutouts.

wrek · 10-22-2009, 08:13 PM

What size is our exhaust? 3"?
The QTEC66 are out of stock at Summit but I was thinking this might be a good starting point except it appears to want to be installed in a straight section of pipe:
http://www.summitracing.com/parts/CMB-05-0022/
Assuming we don't NEED the lower profile oval..? Though if that's the case we can go with the QTEC round I think.

Altered · 10-22-2009, 09:45 PM

There is no way you are getting anything but the Oval in there. Yes the 2.5" tubing fits but the extra 1" below for the flange would hit the ground pretty major.
I will get a price on full kits or just QTP and side pipe kits for you guys. If you already have the QTP Cutouts installed I don't believe our side pipes will be a direct bolt on. 1" off in these cars and the side pipe will hit floor, Gaslines, etc.

Altered · 10-22-2009, 09:47 PM

The QTP Oval cutouts are very easy to install. Notch the tube suplied with the cutout, place on pipe mark plasma or drill and file hole, Weld on stub. I would like to see QTP use stainless on there pipe and flanges instead of the galvinized steel it would make the weld easier with no risk of corosion but twhat they offer will be fine for many.

wrek · 10-22-2009, 10:08 PM

If I can get the parts I'll take it to a muffler shop to install I think... probably best left to the pros

Altered · 10-22-2009, 10:18 PM

It will be 90% bolt on the only welding it would require is to the Header mid pipe. If someone wanted the whole setup Headers back I aam sure it would be a full bolt on.

wrek · 10-23-2009, 07:47 AM

Quote:

Originally Posted by Altered

It will be 90% bolt on the only welding it would require is to the Header mid pipe. If someone wanted the whole setup Headers back I aam sure it would be a full bolt on.

That would be a good option to price for us. I can weld but it ain't pretty..

Altered · 10-24-2009, 09:51 PM

I want to get another set installed here at the shop before I send any out. Make sure my fitment is dead nuts on. As soon as it happens I will get up complete kit prices.
Josh

zebra · 10-24-2009, 09:58 PM

gotta say...

i'm a fan

2SSRS · 10-25-2009, 12:24 AM

QTP sent me a set of there Oval cutouts to put on the car and i need to see if i can get it done by next Sunday, Can you tell me what the size of the box ix it looks like a gen 4 tip is it.

GQ4Life · 10-25-2009, 02:27 AM

sound clips

10-21-2009, 09:58 AM	#1
Altered Drives: Alot Join Date: Oct 2009 Location: Plainfield CT Posts: 19	Sidepipes?

10-21-2009, 06:16 PM	#2
BOBSS Drives: 2008 TBSS Join Date: Jan 2009 Location: Decatur Illinois Posts: 298	YEAH! I need to do that Do you have some sort of support just prior to the outlet? __________________ 2SS RJT 6MT ARH/QTP/HAI/Tune/Empire Billet

10-21-2009, 06:18 PM	#3
Indpowr Camarostyle.com Drives: Corvette C6 Join Date: May 2008 Location: Florida Posts: 4,645 View My Garage	So do you still have rear exhaust as well? I think side exhaust built into the sideskirts would look killer. __________________ www.camarostyle.com (FULL custom leather interiors/Wheels/Body Kits) *My Garage* http://www.cardomain.com/id/KandyCorvette2

10-21-2009, 06:25 PM	#4
2SSRS 2G1FT1EW4A9103359 Drives: 2010 Camaro 2SS M6 Join Date: Oct 2008 Location: By the lake in AZ Posts: 3,425 View My Garage	Now that is old school looks like you got cut outs to the side pipes and the OEM pipes from there, Nice __________________ 2G1FT1EW4A9103359 came to life on 4-14-09 Delivered 6-2-09 Order # NDKKWX Only 44 Days for delivery My build journal ---->http://www.camaro5.com/forums/showthread.php?t=30587

10-22-2009, 09:55 AM	#6
2SSRS 2G1FT1EW4A9103359 Drives: 2010 Camaro 2SS M6 Join Date: Oct 2008 Location: By the lake in AZ Posts: 3,425 View My Garage	Congrats as that looks good. __________________ 2G1FT1EW4A9103359 came to life on 4-14-09 Delivered 6-2-09 Order # NDKKWX Only 44 Days for delivery My build journal ---->http://www.camaro5.com/forums/showthread.php?t=30587

10-22-2009, 07:30 AM	#5
Altered Drives: Alot Join Date: Oct 2009 Location: Plainfield CT Posts: 19	The system consists of ARheaders, QTP Oval cutouts and factory mufflers. Sounds good going through the factory mufflers then sounds real good when the dumps are open and going through the side pipes. They have one bracket at the trans tunel support and are very secure. Still plenty of ground clearance on a non lowered car for speed bumps and what not. No rattles, I wrapped the entire pipe also because it does go along the fuel lines and under the tanks. The fuel lines also have a heat sleave on them.

10-22-2009, 09:59 AM	#7
wrek 2G1FK1EJ6-9 Drives: 2010 Camaro 2SS RS Transformer Join Date: Oct 2009 Location: Ankeny, IA Posts: 659 View My Garage	That looks awesome... wish I could get it done as well!

10-22-2009, 03:55 PM	#8
Altered Drives: Alot Join Date: Oct 2009 Location: Plainfield CT Posts: 19	I could make some kits up. Would come with everything you need. You would have to have an exhaust shop weld to the exhaust though.

10-22-2009, 04:00 PM	#9
BumbleDs Drives: 2010 Camaro RS/SS TF Edition Join Date: Sep 2009 Location: Des Moines Posts: 635 View My Garage	Ditto, Im a fan! __________________ Love it or hate it, my car can transform and kick your cars @$$!

10-22-2009, 04:24 PM	#10
metaphysician Drives: 2SSRS CGM & Harley 883R Black Join Date: Aug 2009 Location: Delaware Posts: 90	Awesome! Can we see a shot further back to get an idea of how it fits in the whole side profile of the car?

10-22-2009, 04:30 PM	#11
chevyss SS/RS Drives: 2010 SS/RS IOM w/blk stripes A6 Join Date: Jun 2009 Location: Eastern Washington Posts: 649 View My Garage	Cost of the kits??

10-22-2009, 06:00 PM	#12
BOBSS Drives: 2008 TBSS Join Date: Jan 2009 Location: Decatur Illinois Posts: 298	I have all but the side pipes. what would those cost me? __________________ 2SS RJT 6MT ARH/QTP/HAI/Tune/Empire Billet

10-22-2009, 07:22 PM	#13
Altered Drives: Alot Join Date: Oct 2009 Location: Plainfield CT Posts: 19

10-22-2009, 07:43 PM	#15
2SSRS 2G1FT1EW4A9103359 Drives: 2010 Camaro 2SS M6 Join Date: Oct 2008 Location: By the lake in AZ Posts: 3,425 View My Garage	Can i ask how hard is the install of the QTP Oval cutouts. __________________ 2G1FT1EW4A9103359 came to life on 4-14-09 Delivered 6-2-09 Order # NDKKWX Only 44 Days for delivery My build journal ---->http://www.camaro5.com/forums/showthread.php?t=30587

10-22-2009, 08:13 PM	#16
wrek 2G1FK1EJ6-9 Drives: 2010 Camaro 2SS RS Transformer Join Date: Oct 2009 Location: Ankeny, IA Posts: 659 View My Garage	What size is our exhaust? 3"? The QTEC66 are out of stock at Summit but I was thinking this might be a good starting point except it appears to want to be installed in a straight section of pipe: http://www.summitracing.com/parts/CMB-05-0022/ Assuming we don't NEED the lower profile oval..? Though if that's the case we can go with the QTEC round I think.

10-22-2009, 09:45 PM	#17
Altered Drives: Alot Join Date: Oct 2009 Location: Plainfield CT Posts: 19	There is no way you are getting anything but the Oval in there. Yes the 2.5" tubing fits but the extra 1" below for the flange would hit the ground pretty major. I will get a price on full kits or just QTP and side pipe kits for you guys. If you already have the QTP Cutouts installed I don't believe our side pipes will be a direct bolt on. 1" off in these cars and the side pipe will hit floor, Gaslines, etc.

10-22-2009, 09:47 PM	#18
Altered Drives: Alot Join Date: Oct 2009 Location: Plainfield CT Posts: 19	The QTP Oval cutouts are very easy to install. Notch the tube suplied with the cutout, place on pipe mark plasma or drill and file hole, Weld on stub. I would like to see QTP use stainless on there pipe and flanges instead of the galvinized steel it would make the weld easier with no risk of corosion but twhat they offer will be fine for many.

10-22-2009, 10:08 PM	#19
wrek 2G1FK1EJ6-9 Drives: 2010 Camaro 2SS RS Transformer Join Date: Oct 2009 Location: Ankeny, IA Posts: 659 View My Garage	If I can get the parts I'll take it to a muffler shop to install I think... probably best left to the pros

10-22-2009, 10:18 PM	#20
Altered Drives: Alot Join Date: Oct 2009 Location: Plainfield CT Posts: 19	It will be 90% bolt on the only welding it would require is to the Header mid pipe. If someone wanted the whole setup Headers back I aam sure it would be a full bolt on.

10-24-2009, 09:51 PM	#22
Altered Drives: Alot Join Date: Oct 2009 Location: Plainfield CT Posts: 19	I want to get another set installed here at the shop before I send any out. Make sure my fitment is dead nuts on. As soon as it happens I will get up complete kit prices. Josh

10-24-2009, 09:58 PM	#23
zebra resident truck enthusiast Drives: one bad___ truck!! Join Date: Oct 2008 Location: the boro, tn Posts: 8,047 View My Garage	gotta say... i'm a fan __________________ ← what mine'll look like

10-25-2009, 12:24 AM	#24
2SSRS 2G1FT1EW4A9103359 Drives: 2010 Camaro 2SS M6 Join Date: Oct 2008 Location: By the lake in AZ Posts: 3,425 View My Garage	QTP sent me a set of there Oval cutouts to put on the car and i need to see if i can get it done by next Sunday, Can you tell me what the size of the box ix it looks like a gen 4 tip is it. __________________ 2G1FT1EW4A9103359 came to life on 4-14-09 Delivered 6-2-09 Order # NDKKWX Only 44 Days for delivery My build journal ---->http://www.camaro5.com/forums/showthread.php?t=30587

10-25-2009, 02:27 AM	#25
GQ4Life Drives: 2010 Camaro SS LS3 Join Date: Aug 2009 Location: Fishkill, NY Posts: 1,443 View My Garage	sound clips __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"modern" sidepipes...	Blacksunshine	Camaro Photoshops / Renderings Forum	17	10-25-2009 07:37 AM
Exhaust Sidepipes?	ZZcamaro	Cosmetics and Lighting Modification Discussions	16	05-01-2009 08:26 AM
Sidepipes?!?!?!	BigRedCornhead	5th Gen Camaro SS LS LT General Discussions	8	12-18-2006 11:03 AM