New Product! 2010 Camaro StretchBra - Great Protection, install or remove in minutes! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RPI Designs · 12-03-2009, 09:57 AM

2010 Camaro Nylon StretchBra

StretchBratm is a quality nylon bra designed for the front of your Camaro. The best feature is that this bra can be installed and removed within 3 minutes, making great for car show. Simply install it for the drive and remove it for the show!

There are three screws that hold the fender liner in place and we replace those screws with a snap head screw. So the mask snaps in the wheel well area and there are two plastic clips at the top of the mask that hook to the upper grill bar. That is the initial installation. Once that is done, simply snap in place to re-install or remove.

Folds up and can be stored right in your glove box!

This product is "better than Vinyl or Leather and cheaper than Film" ; "Made in the U.S.A".; "backed by the manufacturers warranty and customer satisfaction policy".

We want to point out although the product is new to the Camaro market it has been successfully time-tested in the Corvette market for the last nine years.

These will begin to ship 12/12/2009 as we built inventory.

Pricing: $139.00

Available here: http://www.rpidesigns.com/shop/item.asp?itemid=1780

RPI Designs · 12-03-2009, 05:31 PM

Guys, please remember these will start shipping in about a week. Thanks for the orders!

tjd24 · 12-05-2009, 09:54 AM

A question - wouldn't air flow for the air box and air for the radiator be reduced by this & if so by how much? As the air flow inlet is near the RS perhaps some reduction but this does cover much of the grill.

RPI Designs · 12-08-2009, 02:58 PM

Quote:

Originally Posted by tjd24

A question - wouldn't air flow for the air box and air for the radiator be reduced by this & if so by how much? As the air flow inlet is near the RS perhaps some reduction but this does cover much of the grill.

Thanks for the question. The answer is no. This is nylon, so the air still flows through just fine.

These have been on the market for Corvette for many years. Airflow is not hindered at all.

RPI Designs · 12-25-2009, 07:25 PM

These are ready to ship, thanks!

Camaro21 · 12-25-2009, 07:32 PM

Do you have or can make something similar to this that is good for racing on the track to keep all the rocks and debris from tearing up the front end paint?

Darth_Emma · 12-27-2009, 07:31 PM

whoa rpi has been suspended.

LittleRockCGM · 12-28-2009, 01:56 PM

Quote:

Originally Posted by Darth_Emma

whoa rpi has been suspended.

What does that mean?

Darth_Emma · 12-28-2009, 04:01 PM

Quote:

Originally Posted by LittleRockCGM

What does that mean?

I'm not sure. I don't care to venture a guess as I might be wrong and woudn't want to dis anyone when I don't really know.

I do know I have purchased things from RPI before and emailed with them and they've been very easy to do buisness with.

RPI Designs · 12-30-2009, 09:28 PM

Yes, we posted in the wrong forum. My mistake. Won't happen again. But we are back and ready to go.

Thanks!!!

RPI Designs · 01-08-2010, 08:35 PM

We just received another batch ready to ship out, thanks!

RPI Designs · 02-20-2010, 02:22 PM

We've got more in stock and ready to ship, thanks again!

Brown5150 · 03-11-2010, 07:38 PM

Wow!
Those are really UGLY!!!!

RPI Designs · 04-27-2010, 06:44 PM

We've got more ready to go, thanks!

WCoolBreeze · 04-27-2010, 07:29 PM

Is there a difference in your product between the one for the LT and SS versions of the Camaro. I have a 2LT/RS and your bra is shown on a SS.

Walt B.

RPI Designs · 05-27-2010, 07:58 PM

Quote:

Originally Posted by WCoolBreeze

Is there a difference in your product between the one for the LT and SS versions of the Camaro. I have a 2LT/RS and your bra is shown on a SS.

Walt B.

Same bra is used for both cars. It has enough stretch that it'll fit both really nicely.

RPI Designs · 08-04-2010, 04:23 PM

Reminder for August, thanks!!

RPI Designs · 09-15-2010, 09:37 AM

We've got more available, thank you for the orders!

trudawg660 · 10-03-2010, 03:11 AM

this thing is hideous but I think I will be buying one for the drive to camaro fest.

RPI Designs · 03-02-2011, 06:34 PM

Quote:

Originally Posted by trudawg660

this thing is hideous but I think I will be buying one for the drive to camaro fest.

You can remove it in under 2 minutes. So the only time you need to put it on is when you are on the highway. Remove it and put it in your glove box. Folds up to the size of your fist.

OUR72GTO · 03-02-2011, 10:27 PM

So after a year is there anyone who bought and installed with a comment?

SATXLS3 · 03-03-2011, 09:33 PM

Quote:

Originally Posted by OUR72GTO

So after a year is there anyone who bought and installed with a comment?

Bought mine from west coast camaro about a year ago. Very quick on and off. Can store in the glove box. Throw it in the washer. Does the job it's intended to do. Just makes your car look like a bandito!

OUR72GTO · 03-04-2011, 10:54 AM

I'm thinking for the drive to Fest.

GMteSSted · 03-04-2011, 07:44 PM

Quote:

Originally Posted by OUR72GTO

So after a year is there anyone who bought and installed with a comment?

Bought mine at CF5fest last year. I put it on for all interstate travel. Easy to use, easy to clean and definitely protects most of the front. Well worth the expense.

RPI Designs · 03-15-2011, 03:10 PM

Quote:

Originally Posted by GMteSSted

Bought mine at CF5fest last year. I put it on for all interstate travel. Easy to use, easy to clean and definitely protects most of the front. Well worth the expense.

12-03-2009, 09:57 AM	#1
RPI Designs Camaro Parts Vendor Drives: 2011 2SS - SG - M6 Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 1,654	New Product! 2010 Camaro StretchBra - Great Protection, install or remove in minutes! 2010 Camaro Nylon StretchBra StretchBratm is a quality nylon bra designed for the front of your Camaro. The best feature is that this bra can be installed and removed within 3 minutes, making great for car show. Simply install it for the drive and remove it for the show! There are three screws that hold the fender liner in place and we replace those screws with a snap head screw. So the mask snaps in the wheel well area and there are two plastic clips at the top of the mask that hook to the upper grill bar. That is the initial installation. Once that is done, simply snap in place to re-install or remove. Folds up and can be stored right in your glove box! This product is "better than Vinyl or Leather and cheaper than Film" ; "Made in the U.S.A".; "backed by the manufacturers warranty and customer satisfaction policy". We want to point out although the product is new to the Camaro market it has been successfully time-tested in the Corvette market for the last nine years. These will begin to ship 12/12/2009 as we built inventory. Pricing: $139.00 Available here: http://www.rpidesigns.com/shop/item.asp?itemid=1780 __________________ RPI DESIGNS, LLC. - 2010-2013 Camaro Parts & Accessories Custom Parts & Accessories for 2010-2013 Camaro SS & Camaro RS!! . Like us on Facebook for chance to win $100/month!http://www.facebook.com/rpidesigns Check our Flickr for photos of our work: http://www.flickr.com/photos/92772600@N03/

12-05-2009, 09:54 AM	#3
tjd24 Thank you Oshawa/St.Cats! Drives: 2010 2LT RS 2G1FC1EV4A9103434 Join Date: May 2009 Location: NW NJ Posts: 3,433 View My Garage	A question - wouldn't air flow for the air box and air for the radiator be reduced by this & if so by how much? As the air flow inlet is near the RS perhaps some reduction but this does cover much of the grill. __________________ http://www.hubgarage.com/mygarage/tjd24 http://ny5thgen.com/TJD24.html #3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 & booked for #5

12-25-2009, 07:32 PM	#6
Camaro21 Drives: 2010 2SS/RS M6 Join Date: Jul 2009 Location: DFW, TX Posts: 4,940 View My Garage	Do you have or can make something similar to this that is good for racing on the track to keep all the rocks and debris from tearing up the front end paint? __________________

12-27-2009, 07:31 PM	#7
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 13,303 View My Garage	whoa rpi has been suspended. __________________

12-30-2009, 09:28 PM	#10
RPI Designs Camaro Parts Vendor Drives: 2011 2SS - SG - M6 Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 1,654	Yes, we posted in the wrong forum. My mistake. Won't happen again. But we are back and ready to go. Thanks!!! __________________ RPI DESIGNS, LLC. - 2010-2013 Camaro Parts & Accessories Custom Parts & Accessories for 2010-2013 Camaro SS & Camaro RS!! . Like us on Facebook for chance to win $100/month!http://www.facebook.com/rpidesigns Check our Flickr for photos of our work: http://www.flickr.com/photos/92772600@N03/

12-03-2009, 05:31 PM	#2
RPI Designs Camaro Parts Vendor Drives: 2011 2SS - SG - M6 Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 1,654	Guys, please remember these will start shipping in about a week. Thanks for the orders!

12-25-2009, 07:25 PM	#5
RPI Designs Camaro Parts Vendor Drives: 2011 2SS - SG - M6 Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 1,654	These are ready to ship, thanks!

01-08-2010, 08:35 PM	#11
RPI Designs Camaro Parts Vendor Drives: 2011 2SS - SG - M6 Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 1,654	We just received another batch ready to ship out, thanks! __________________ RPI DESIGNS, LLC. - 2010-2013 Camaro Parts & Accessories Custom Parts & Accessories for 2010-2013 Camaro SS & Camaro RS!! . Like us on Facebook for chance to win $100/month!http://www.facebook.com/rpidesigns Check our Flickr for photos of our work: http://www.flickr.com/photos/92772600@N03/

02-20-2010, 02:22 PM	#12
RPI Designs Camaro Parts Vendor Drives: 2011 2SS - SG - M6 Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 1,654	We've got more in stock and ready to ship, thanks again! __________________ RPI DESIGNS, LLC. - 2010-2013 Camaro Parts & Accessories Custom Parts & Accessories for 2010-2013 Camaro SS & Camaro RS!! . Like us on Facebook for chance to win $100/month!http://www.facebook.com/rpidesigns Check our Flickr for photos of our work: http://www.flickr.com/photos/92772600@N03/

03-11-2010, 07:38 PM	#13
Brown5150 #17,149 Drives: 2010 Camaro 2SS Join Date: Aug 2009 Location: Oakdale, Calif Posts: 125 View My Garage	Wow! Those are really UGLY!!!! __________________

04-27-2010, 06:44 PM	#14
RPI Designs Camaro Parts Vendor Drives: 2011 2SS - SG - M6 Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 1,654	We've got more ready to go, thanks! __________________ RPI DESIGNS, LLC. - 2010-2013 Camaro Parts & Accessories Custom Parts & Accessories for 2010-2013 Camaro SS & Camaro RS!! . Like us on Facebook for chance to win $100/month!http://www.facebook.com/rpidesigns Check our Flickr for photos of our work: http://www.flickr.com/photos/92772600@N03/

04-27-2010, 07:29 PM	#15
WCoolBreeze 2LT/RS RJT Drives: 2010 2LT/RS RJT W/CGM Rally Stripes Join Date: Nov 2008 Location: Imperial, CA Posts: 1,093	Is there a difference in your product between the one for the LT and SS versions of the Camaro. I have a 2LT/RS and your bra is shown on a SS. Walt B. __________________ 2010 2LT/RS (Vin - 7757) 2005 Dodge Magnum R/T (Yes it has a Hemi) 1987 Camaro RS (California Special) Mods Done CGM Gills, "RS" in both headrests, GMPP Exhaust w/ Tips, RJT XM Antenna, RS Foglight/DRL Plug/Play Harness, Stow & Go Front Plate, Leather E-Brake Boot & Auto Boot, HUD Installed, Full ABL doors & Dash, RJT Heritage Grill, T-Rex Lower Grill, Roto-Fab CAI (RJT), W/W Reservoir, V-6 Radiator Cover (RJT), ADM Race Air Scoop, GM Cupholder & Footwell LEDs, Retrofit GM Rearview Mirror (w/video) & Backup Camera, and Conv Spoiler.

08-04-2010, 04:23 PM	#17
RPI Designs Camaro Parts Vendor Drives: 2011 2SS - SG - M6 Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 1,654	Reminder for August, thanks!!

09-15-2010, 09:37 AM	#18
RPI Designs Camaro Parts Vendor Drives: 2011 2SS - SG - M6 Join Date: Jul 2009 Location: Ohio - www.rpidesigns.com Posts: 1,654	We've got more available, thank you for the orders! __________________ RPI DESIGNS, LLC. - 2010-2013 Camaro Parts & Accessories Custom Parts & Accessories for 2010-2013 Camaro SS & Camaro RS!! . Like us on Facebook for chance to win $100/month!http://www.facebook.com/rpidesigns Check our Flickr for photos of our work: http://www.flickr.com/photos/92772600@N03/

10-03-2010, 03:11 AM	#19
trudawg660 Drives: 2006 Dodge Charger / 2SS IOM Join Date: Dec 2008 Location: United Kingdom Posts: 1,644	this thing is hideous but I think I will be buying one for the drive to camaro fest.

03-02-2011, 10:27 PM	#21
OUR72GTO 2010 SIM Beige RS 6M Drives: SIM RS 6M 72 GTO 07 NBS Silverado Join Date: Oct 2008 Location: Kamloops,British Columbia Posts: 4,496	So after a year is there anyone who bought and installed with a comment? __________________ CAMARO.. 2010 The Heart Beat is back in CHEVROLET Now let's put it back in America

03-04-2011, 10:54 AM	#23
OUR72GTO 2010 SIM Beige RS 6M Drives: SIM RS 6M 72 GTO 07 NBS Silverado Join Date: Oct 2008 Location: Kamloops,British Columbia Posts: 4,496	I'm thinking for the drive to Fest. __________________ CAMARO.. 2010 The Heart Beat is back in CHEVROLET Now let's put it back in America

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM