Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
BeckyD@RodgersChevrolet
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetics and Lighting Modification Discussions

Cosmetics and Lighting Modification Discussions External and Internal cosmetics modifications.

Reply
 
Thread Tools
Old 01-27-2010, 08:44 PM   #101
HaZe_X

 
HaZe_X's Avatar
 
Drives: Trailblazer SS & Camaro SS
Join Date: Nov 2009
Location: North Jersey
Posts: 759
Quote:
Originally Posted by AACstyle View Post
Due to other vendors "knocking off" our ideas in the past by getting our Installation Guides from the forums we are choosing to not disclose our instructions at this time. We have not posted instructions for any of our Camaro products on the forums but have been more than happy to link customers to other customer DIYs.
Understand that. Can you at least give me some info on the cutting part? Like I said, I REALLY want these. PM me if you have too.
HaZe_X is offline   Reply With Quote
Old 01-28-2010, 02:50 PM   #102
marley.
OCD
 
marley.'s Avatar
 
Drives: A couple Camaros
Join Date: Oct 2009
Location: Paradise Road
Posts: 492
Will the p13w bulbs fit in these aftermarket fogs if you want to run them instead of the halogen that comes with the set?
marley. is offline   Reply With Quote
Old 01-29-2010, 05:15 PM   #103
AuSStinVRCamaro
 
Drives: 2010 Victory Red Camaro
Join Date: Nov 2009
Location: Los Angeles
Posts: 133
Thanks for the Info. Any way you can show us noobs how to install it now? For instance, the relay harness. Thanks
AuSStinVRCamaro is offline   Reply With Quote
Old 01-30-2010, 12:51 PM   #104
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
Quote:
Originally Posted by HaZe_X View Post
Understand that. Can you at least give me some info on the cutting part? Like I said, I REALLY want these. PM me if you have too.
The foglight has a perch in the bumper, that has to go.

Here is a picture to clarify:


Quote:
Originally Posted by marley. View Post
Will the p13w bulbs fit in these aftermarket fogs if you want to run them instead of the halogen that comes with the set?
No, the P13 bulb will only fit in a factory Camaro Foglight. I do not know of any other light out there that would accept that bulb.

Quote:
Originally Posted by AuSStinVRCamaro View Post
Thanks for the Info. Any way you can show us noobs how to install it now? For instance, the relay harness. Thanks
The relay harness simply connects to the 2 foglights then gets powered from the battery and triggered from the source that you want to activate the lights (ie: parking lights, toggle switch, etc).
AACstyle is offline   Reply With Quote
Old 01-31-2010, 11:13 PM   #105
Alain

 
Alain's Avatar
 
Drives: 2010 SS, RS, Manual. 2012 F150, FX4
Join Date: Dec 2009
Location: Northern NJ
Posts: 1,489
when you order this kit with the halo option can you have just the halos on?

Last edited by Alain; 02-01-2010 at 08:55 PM.
Alain is offline   Reply With Quote
Old 02-01-2010, 08:55 PM   #106
Alain

 
Alain's Avatar
 
Drives: 2010 SS, RS, Manual. 2012 F150, FX4
Join Date: Dec 2009
Location: Northern NJ
Posts: 1,489
any chance we can see this thing installed and in action?
Alain is offline   Reply With Quote
Old 02-02-2010, 10:21 AM   #107
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
Quote:
Originally Posted by Alain View Post
when you order this kit with the halo option can you have just the halos on?
Yes, they can be connected to a switch. Add this:
http://www.automotivelightstore.com/...kerswitch.aspx

Quote:
Originally Posted by Alain View Post
any chance we can see this thing installed and in action?
AACstyle is offline   Reply With Quote
Old 02-03-2010, 01:44 AM   #108
pureh2o2
 
Drives: 2010 Camaro LS Coupe
Join Date: Jan 2010
Location: Escondido CA
Posts: 32
Upgrades?

OK..I have the LS coupe V6 and need to add the fog lights like right now. What kit? cost? install tim? location? Ready to pull the trigger on this..it will be the part that finally makes it not stodk,,,,lets bargain if appropriate!
Attached Images
   

Last edited by pureh2o2; 02-03-2010 at 01:47 AM. Reason: Ad stock LS coupe V6 pics
pureh2o2 is offline   Reply With Quote
Old 02-03-2010, 11:20 AM   #109
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
Quote:
Originally Posted by pureh2o2 View Post
OK..I have the LS coupe V6 and need to add the fog lights like right now. What kit? cost? install tim? location? Ready to pull the trigger on this..it will be the part that finally makes it not stodk,,,,lets bargain if appropriate!
The only additional modificaiton you would need to make on the LS is either cutting the bezel or getting new bezels from Chevy for the fog light to go into.

AACstyle is offline   Reply With Quote
Old 02-03-2010, 11:21 AM   #110
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
This is a picture of the fog light installed with the hole-cut bezel:
AACstyle is offline   Reply With Quote
Old 02-03-2010, 11:57 AM   #111
Alain

 
Alain's Avatar
 
Drives: 2010 SS, RS, Manual. 2012 F150, FX4
Join Date: Dec 2009
Location: Northern NJ
Posts: 1,489
Quote:
Originally Posted by AACstyle View Post
This is a picture of the fog light installed with the hole-cut bezel:
We can then put an LED halo around that bezel correct?
Alain is offline   Reply With Quote
Old 02-03-2010, 11:59 AM   #112
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
Quote:
Originally Posted by Alain View Post
We can then put an LED halo around that bezel correct?
No, the Halo can only be added to this type of projector:
http://www.automotivelightstore.com/CamaroFogKit.aspx

This foglight has a glass lens for the ring to sit behind.
AACstyle is offline   Reply With Quote
Old 02-03-2010, 12:28 PM   #113
Alain

 
Alain's Avatar
 
Drives: 2010 SS, RS, Manual. 2012 F150, FX4
Join Date: Dec 2009
Location: Northern NJ
Posts: 1,489
Ok thanks. I'm gonna have to call you guys to order just to make sure I don't screw up the order.
Alain is offline   Reply With Quote
Old 02-21-2010, 11:17 PM   #114
MotorCityTransplant
 
MotorCityTransplant's Avatar
 
Drives: 2010 LS Camaro CGM 6M
Join Date: Jan 2010
Location: Burbank, CA
Posts: 41
I see how you cut the existing LS bezel to fit the Hella projector fog lights in, but I have a few questions before I purchase. I am getting my car in about a little over a week and I want to make this the first mod I make.

1) What size hole was cut to allow for the Hella fog lights to fit through?

2) What did you use to connect the four mounting bolts to? I don't see anything on the existing bezel that you can connect the bolts to.

3) Will this method for putting in the hella lights also work for the foglights you have availble on your site? (http://www.automotivelightstore.com/CamaroFogKit.aspx)

4) If I bought either of these light setups and got "new bezels from Chevy for the fog light to go into" would there be any modifications needed to the bezels? I am not concerned with the wiring on these, but more the placement and fit of the foglights into the bezels.

Thanks in advance for the help.
MotorCityTransplant is offline   Reply With Quote
Old 02-22-2010, 09:12 AM   #115
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
Quote:
Originally Posted by MotorCityTransplant View Post
I see how you cut the existing LS bezel to fit the Hella projector fog lights in, but I have a few questions before I purchase. I am getting my car in about a little over a week and I want to make this the first mod I make.

1) What size hole was cut to allow for the Hella fog lights to fit through?

2) What did you use to connect the four mounting bolts to? I don't see anything on the existing bezel that you can connect the bolts to.

3) Will this method for putting in the hella lights also work for the foglights you have availble on your site? (http://www.automotivelightstore.com/CamaroFogKit.aspx)

4) If I bought either of these light setups and got "new bezels from Chevy for the fog light to go into" would there be any modifications needed to the bezels? I am not concerned with the wiring on these, but more the placement and fit of the foglights into the bezels.

Thanks in advance for the help.
1) The size and info is included in the instructions.

2) Parts and instructions included with the kit.

3) That is the kit for sale in this thread.

4) No, they will fit with no modification.

LH: GM PART # 92194282
RH: GM PART # 92194283
$12.38/ea. www.gmpartsdirect.com
AACstyle is offline   Reply With Quote
Old 02-23-2010, 12:17 AM   #116
travisplusdunks
 
travisplusdunks's Avatar
 
Drives: 2010 Camaro LS Victory Red
Join Date: Aug 2009
Location: New York
Posts: 62
thanks for posting those part numbers, i don't trust myself to do a good job of trimming the bezels once i get the foglights.
Quote:
Originally Posted by AACstyle View Post
1) The size and info is included in the instructions.

2) Parts and instructions included with the kit.

3) That is the kit for sale in this thread.

4) No, they will fit with no modification.

LH: GM PART # 92194282
RH: GM PART # 92194283
$12.38/ea. www.gmpartsdirect.com
__________________
im from a younger generation, the 2010 camaro will be the one i remember when im old.

2010 camaro was my first car!
travisplusdunks is offline   Reply With Quote
Old 02-23-2010, 11:32 AM   #117
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
Quote:
Originally Posted by travisplusdunks View Post
thanks for posting those part numbers, i don't trust myself to do a good job of trimming the bezels once i get the foglights.
Travis, you were one of the first to ship (per our conversation) if you did not get instructions please let me know so I can send them to you.
AACstyle is offline   Reply With Quote
Old 02-25-2010, 12:58 AM   #118
xpanda305x
Banned
 
Drives: Dark Knight
Join Date: Nov 2009
Location: Gunshine State
Posts: 3,162
Hey Justin I have a few question.

I'm planning to order these fog lights for my camaro ls. I was wondering if I had to go thru firewall or not? Also what is the chepest u can sell them for fogs n switch? Any military discount or birthday discount ? Lol march 19 l
xpanda305x is offline   Reply With Quote
Old 02-25-2010, 08:50 AM   #119
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
Quote:
Originally Posted by xpanda305x View Post
Hey Justin I have a few question.

I'm planning to order these fog lights for my camaro ls. I was wondering if I had to go thru firewall or not? Also what is the chepest u can sell them for fogs n switch? Any military discount or birthday discount ? Lol march 19 l
No, there is no need to go through the firewall unless you want to use a switch with these lights. The pricing on the site is up to date, we have no active discounts at this time.
AACstyle is offline   Reply With Quote
Old 02-25-2010, 09:49 AM   #120
xpanda305x
Banned
 
Drives: Dark Knight
Join Date: Nov 2009
Location: Gunshine State
Posts: 3,162
okay but i would like to use a switch to be able to control the fog lights and such......

how hard would it be able to go thru the firewall? have you guys ever done it? please let me know asap!!!
xpanda305x is offline   Reply With Quote
Old 02-25-2010, 11:36 AM   #121
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
Quote:
Originally Posted by xpanda305x View Post
okay but i would like to use a switch to be able to control the fog lights and such......

how hard would it be able to go thru the firewall? have you guys ever done it? please let me know asap!!!
Yes, we do it every day. There is a grommet to pass wire through.
AACstyle is offline   Reply With Quote
Old 02-25-2010, 08:39 PM   #122
xpanda305x
Banned
 
Drives: Dark Knight
Join Date: Nov 2009
Location: Gunshine State
Posts: 3,162
Iiight! Can someone do it themself or not?
xpanda305x is offline   Reply With Quote
Old 02-25-2010, 11:33 PM   #123
hairzee
 
hairzee's Avatar
 
Drives: 2010 SS Camaro
Join Date: Sep 2009
Location: Orange County, CA
Posts: 178
projector lights

Justin,

I recieved my projector lights tonight for my RS and I have a couple of isues.

1. They dont plug into the stock plugs.
2. They are smaller than the stock lights so they are going to look like crap because there is going to be a gap.
3. You shipped with no instructions.
4. You shipped with no hardware to mount them.

What is your suggestion?
hairzee is offline   Reply With Quote
Old 02-26-2010, 02:50 AM   #124
MotorCityTransplant
 
MotorCityTransplant's Avatar
 
Drives: 2010 LS Camaro CGM 6M
Join Date: Jan 2010
Location: Burbank, CA
Posts: 41
Quote:
Originally Posted by AACstyle View Post
1) The size and info is included in the instructions.

2) Parts and instructions included with the kit.

3) That is the kit for sale in this thread.

4) No, they will fit with no modification.

LH: GM PART # 92194282
RH: GM PART # 92194283
$12.38/ea. www.gmpartsdirect.com

Thanks for the info Justin. This sounds like what I want to go with. For $12 per bezel it is well worth it to not make any modifications.
MotorCityTransplant is offline   Reply With Quote
Old 02-26-2010, 11:01 AM   #125
AACstyle

 
AACstyle's Avatar
 
Drives: www.CamaroLighting.com
Join Date: Jul 2009
Location: New Orleans, LA
Posts: 6,586
Quote:
Originally Posted by hairzee View Post
Justin,

I recieved my projector lights tonight for my RS and I have a couple of isues.

1. They dont plug into the stock plugs.
2. They are smaller than the stock lights so they are going to look like crap because there is going to be a gap.
3. You shipped with no instructions.
4. You shipped with no hardware to mount them.

What is your suggestion?
1) The stock plugs are P13W or 5202 depending on your model, you are correct, they will not plug into these lights or any other lights. That is why the fog lights are shipped with wiring adapters.
2) These look great on the Camaro, I have the same lights on mine. I am sure you looked at the pictures I posted before you purchased correct?
3) Yes, see post #117.
4) If you need additional help further than the instructions provide please give us a call 1(800)407-5776 and we can wlk you through it.
AACstyle is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs! RPI Designs Cosmetics and Lighting Modification Discussions 32 06-27-2014 08:44 AM
CAMARO WIKI Tran Wiki 47 02-19-2014 03:23 PM
Motorgen LA Invasion Videos (58) and Pics Thread SeanPlunk USA - California 5 05-31-2009 01:23 AM


All times are GMT -5. The time now is 03:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.