Door handles mod discussion

[Xanthos]

So, I was walking down the walmart parking lot today, and my eye was caught by a door handle - one I've seen before, but that drew my eye in particular today. The door handle was this one.

From a C6 corvette, for those who didn't already know.

Now, I was already debating on doing shaved door handles, but this made me think... how awesome looking would these be? So... do you agree? I was planning on getting my car in Silver Ice with Cyber Gray stripes. Would these handles look good on the new camaro? How much do you think it would cost to have them installed, since I'd have to have the body work done custom?
- Xanthos

[EllwynX]

I wish these types of door handles were more common. I've liked them since way back when the Lumina and Beretta had them in the early 90's.

[nUcLeArEnVoY]

You would not only need to modify the door but it's also possible the door jamb hitch would need to be changed too. It sounds expensive, but anything is possible if you got the money. I am thinking about chroming my door handles to compliment the RS package's chrome trim on the tail lights. Gives it all the more of an oldschool look.

[kamisxy]

I love the door handles on the concept....theyre chrome and retro...and look hot...thats what iam planning to do,

[Supermans]

Originally Posted by kamisxy

I love the door handles on the concept....theyre chrome and retro...and look hot...thats what iam planning to do,

If they were real metal, they would be "HOT" to the touch when trying to open the door.. They look nice, but I prefer plastic..

[Mindz]

The problem with those handles are that they're very small and narrow. Try fitting your key into the hole. If you're not very precise, it will lead to several small scratches on the door...I can see why they changed them. I'd rather have the old school door handles (a button on the bottom of the car) but those C6 handles look hot.

[Skyman 08]

Originally Posted by Mindz

The problem with those handles are that they're very small and narrow. Try fitting your key into the hole. If you're not very precise, it will lead to several small scratches on the door...I can see why they changed them. I'd rather have the old school door handles (a button on the bottom of the car) but those C6 handles look hot.

I had an 88 Grand Prix with those handles and never had any problem "Hitting the hole" Plus where they were located on the door window frame hid them very well,. Anyway I would say Keyless entry will be standard on the Camaro or at least 90 percent of them will have it so the key may never be used to unlock the car.

But I have no problem with the Handles on the New Camaro. They look just like the ones on my HHR and Sky, I wonder if they can be swapped, because my HHR and Sky both have Chrome handles.

[kanys]

Yeah I agree the concept's handle's look amazing but if they were metal that would be bad. Down here in Texas it gets pretty darn steamy, which is the reason I plan to get a light color like Silver as oppose to the Black, which would be my first choice.

[willisit]

The new Nissan GTR and the Aston Martin V8 both have those kind of "blade" door handles and they work very well - I wish the Camaro had kept them as they really worked well - now they just look like most other manufacturer's do - still, it's a minor thing so I won't moan.

[zebra]

i always liked the concept handles. it'd be like watching people trying to solve a puzzle the first time they try to open the door. they just had a smoother look to them, but i'd imagine they'd cost a bit more to incorporate into the production car i'd say there's some heavy-enough-duty plastics out there to make them out of, so you avoid the heat issue.

too late now

[Never2LowChevy]

I am going to shave the handles on my car also. The new vette handles are pretty hard to do unless its the c5 handles so those arent anything but a little body work. The plastic chrome handles make a car look cheap so if your gonna do those then go ahead and get some chrome fender trim, chrome side mirror covers, chrome stick on fender vents, chrome vent visors, chrome gas cap, and some stick on chrome trim on the edge of the door to match.

[Xanthos]

Originally Posted by Never2LowChevy

I am going to shave the handles on my car also. The new vette handles are pretty hard to do unless its the c5 handles so those arent anything but a little body work. The plastic chrome handles make a car look cheap so if your gonna do those then go ahead and get some chrome fender trim, chrome side mirror covers, chrome stick on fender vents, chrome vent visors, chrome gas cap, and some stick on chrome trim on the edge of the door to match.

The C5 door handles aren't anything like I wanted - Oh well though...

After seeing the car in person, I'll probably just stick with the stock handles, although I'll probably get a filler piece for the keyhole since I'll just be using the button.
- Xanthos

[Never2LowChevy]

Originally Posted by XanthosV6

The C5 door handles aren't anything like I wanted - Oh well though...

After seeing the car in person, I'll probably just stick with the stock handles, although I'll probably get a filler piece for the keyhole since I'll just be using the button.
- Xanthos

Yeah, C5 handles are pretty much a regular handle. As far as the key hole goes, if you just want to get rid of that and make it look better then a filler piece then when it come available just order a passenger side handle and install it on the driver door. Most of the time the handles are the same and all you have to do is flip them. Ive done this with several trucks. I got a suburban handle from the rear doors, painted them and put them on the driver side. It gives the appearance of a shved handle from a distance but the functionality of the handle.

[TheClassicCarKid]

Originally Posted by Never2LowChevy

Yeah, C5 handles are pretty much a regular handle. As far as the key hole goes, if you just want to get rid of that and make it look better then a filler piece then when it come available just order a passenger side handle and install it on the driver door. Most of the time the handles are the same and all you have to do is flip them. Ive done this with several trucks. I got a suburban handle from the rear doors, painted them and put them on the driver side. It gives the appearance of a shved handle from a distance but the functionality of the handle.

There are little color-matched caps you can buy for like 5 bucks that you stick over the keyhole. They're on the site somewhere, I remember a post from a long time ago where someone was selling them.

[Xanthos]

Originally Posted by TheClassicCarKid

There are little color-matched caps you can buy for like 5 bucks that you stick over the keyhole. They're on the site somewhere, I remember a post from a long time ago where someone was selling them.

Yep - thats the ones I was talking about. That way if the battery died on my remote, I'd still be able to get the door open by just popping the cap out and using the key.
- Xanthos

[patriotpa]

I've been searching this site, and I can't find where to get these little color-matched caps for the door handles. Anyone?

[Red Hot SS]

I love these handles, my dad's '07 Z06 has them.

I think they would look great on the Camaro, I just think its a pretty substantial mod that might be a little to time consuming and costly to be worth it.

Awesome idea though

[Camaro_Corvette]

Originally Posted by patriotpa

I've been searching this site, and I can't find where to get these little color-matched caps for the door handles. Anyone?

There was two threads on the issue. One got deleted because fights broke out n the thread. How? IDK.. That was the flush fitting one. The second was a set that are not as good, but they do the job. Here is the second one.



http://www.camaro5.com/forums/showth...hlight=keyhole

[patriotpa]

I liked the other one much better

[Bentley78]

Xanthos if you dont do this then let me be the first, i searched for this topic and upset to see someone else had the idea, i still want to give it a try.