01-04-2010, 05:49 PM | #1 |
Drives: Camaro Join Date: Apr 2009
Location: Texas
Posts: 1,669
|
Texas Speed Long Tube Headers & Exhaust System Sound Clips!!
Finally I had some free time to take a few quick videos for you guys wanting sound clips of the TSP 2010 exhaust system. Hopefully this will help to show you guys how nice the cars can sound when going through a high quality aftermarket muffler. This is the complete system with high flow cats & 3" magnaflow mufflers. The car is a 2SS 2010 M6 car with heads/cam, TSP air intake & TSP exhaust system!
Enjoy! http://www.precisionracecomponents.com/2010wot.wmv http://www.precisionracecomponents.com/driveoff2010.wmv http://www.precisionracecomponents.com/201070mph.wmv http://www.precisionracecomponents.com/2010exhaust.wmv |
01-04-2010, 05:53 PM | #2 |
Drives: Camaro Join Date: Apr 2009
Location: Texas
Posts: 1,669
|
|
01-04-2010, 06:19 PM | #3 |
I've been lost...
Drives: 2010 SW 2SS/RS W/IOM LSA Swap Join Date: Nov 2009
Location: DFW, Texas
Posts: 466
|
lets get a group buy going on these!
|
01-04-2010, 06:25 PM | #4 |
Drives: Camaro Join Date: Apr 2009
Location: Texas
Posts: 1,669
|
we can do if we get a good number of guys wanting to do it...
|
01-04-2010, 07:34 PM | #5 |
|
sounds great put me on the list.
__________________
2010 Hennessey HPE650 2SSRS Blk/Blk
Magnuson TVS2300,ported heads,cam,Hotchkis suspension. Weld 17”s, Mickey Thompson’s. |
01-04-2010, 07:40 PM | #6 |
Drives: 2010 SS/RS M6 Join Date: Nov 2009
Location: Falcon, CO
Posts: 661
|
Wish I had the doe!
Mav
__________________
SS/RS M6, SIM, CGM stripes, Barton S/T, BMR trailing arms, ADM Race intake(no scoop), Texas Speed 1 7/8" headers and full 3" exhaust, RMCR custom tune.
|
01-04-2010, 09:08 PM | #7 | |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Quote:
BTW: what's your take on having the headers Jet Coated? Being T-409 won't they get some surface rust over time?
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
|
01-04-2010, 09:25 PM | #8 |
Drives: 2010 SS Join Date: Nov 2009
Location: Waco, TX
Posts: 186
|
I plan on getting a set this Thursday. Do they come ceramic coated or not? And if not, is this something I should look into? I know ceramic is suppose to cut down on heat, but does it really help that much? Any info on this would be cool. Jason TA 98, I emailed one of your sells reps about the order but haven't gotten a response yet. I was curious about how long it takes to get them. I have about 3 weeks from this Thursday to get them, otherwise I will have to wait. Work has me gone quite a bit. Let me know.
|
01-04-2010, 10:22 PM | #9 |
Drives: 03 Evo 8, 93 KAT S13 Join Date: Jun 2009
Location: Houston
Posts: 50
|
Sounds good
Last edited by gtrpryde; 01-04-2010 at 11:34 PM. Reason: cannot read... |
01-04-2010, 11:15 PM | #10 |
480 HP 2010 2SS
|
I believe that does have a cam in it, listen to the last file.
__________________
Without data you are just another person with an opinion.
1100 :10/15/08 3000:3/2609 3300:4/18/09 3400 (broadcast)April 25, 2009 3800 (produced):May 4, 2009 #7470 4200 (Shipped): June 1, 2009 5000 (At Dealer) June 9,2009 374.9 rwhp & 371.7 rwtq - bone stock @ 85 deg. |
01-04-2010, 11:34 PM | #11 |
Drives: 03 Evo 8, 93 KAT S13 Join Date: Jun 2009
Location: Houston
Posts: 50
|
Lol. Reading owns me, very quiet for being cammed...
|
01-05-2010, 08:56 AM | #12 | |
Drives: Camaro SS Join Date: Dec 2009
Location: TX
Posts: 193
|
Quote:
Correct me if I am wrong. Cheers |
|
01-05-2010, 12:50 PM | #13 |
Drives: 2011 Dodge 3500 dually Mega Cab Join Date: Jul 2009
Location: discovery bay,ca
Posts: 667
|
|
01-05-2010, 06:22 PM | #14 |
Drives: Camaro Join Date: Apr 2009
Location: Texas
Posts: 1,669
|
Wow I didn't expect someone to say they'd expect more from a exhaust swap! LOL I thought 37hp was pretty good! The car in the video with heads/cam makes right at 500rwhp
Abosolutely not on coating the headers. A SLIGHT amount of surface rust after a long time could be seen, but it will in no way cause a failure. Stainless holds up to weather very well. |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
V8 Camaro Performance Upgrades List | Milk 1027 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 93 | 08-30-2021 05:56 PM |
Dynatech's SuperMaxx Long Tube Header Packages On Sale!!! | tbyrne | V8 Bolt-Ons & Tunes | 8 | 01-26-2010 01:31 PM |
Texas Speed Complete Exhaust System Pics FINALLY! Header to Tips!! | Jason 98 TA | V8 Bolt-Ons & Tunes | 35 | 12-31-2009 07:32 PM |
Sneak Peek Texas Speed 1 7/8" Stainless Long Tubes!! | Jason 98 TA | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 36 | 12-19-2009 01:13 PM |