Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Dynomax
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)

V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) Driveshafts | Differentials | Gears | Rearends | Clutch | Shifters

Reply
 
Thread Tools
Old 02-02-2010, 02:52 PM   #1
MTI Racing Kevin

 
MTI Racing Kevin's Avatar
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Marietta, GA
Posts: 525
PRESS RELEASE-V6 Camaro Shifters from MTI Racing

Announcing the arrival of the MTI Racing by UUC Six Shooter Shifter for V6 Camaro

The stock Camaro shifter has many rubber components that numb the performance feel. MTI Racing teamed up with manufacturing giant UUC Motorwerks to engineer the V6 Camaro shifter with the best materials, shorter throw, and a better overall feel. Now you can confidently go through the gears with confidence and precision. The throw is reduced by approximately 25% and a HUGE improvement in feel. It feels like 1000% improvement.

The stock OEM shifter is made using a 4-pc shaft that is bushed with rubber, a pressed-on ball joint, and a welded-on pivot that holds a shaft bearing attached to rubber linkage bushings. The new MTI Racing Six Shooter Shifter for V6 Camaro is made of high quality stainless steel with a 1-pc ball machined directly into the lower stick, and a roller bearing at the base shift rod link. The kit also replaces the stock rubber bushings with durable delrin composite bushings, increasing the overall strength and life of the shifter assembly. Our shifter has been designed to perfectly work with the stock transmission self centering mechanism and have better then factory performance. The MTI Racing Six Shooter Shifter requires little to no extra effort when shifting, and instills confidence with its solid structural feel. Mission accomplished.

The MTI Racing Six Shooter shifter kit is not an entire shifter housing replacement. The kit includes all the components to convert the shifter assembly and its internal hardware with the highest quality components, while retaining the factory housing. Installation of the shifter requires the transmission to be lowered slightly to remove and install the shifter assembly. The new shifter is designed to use the stock shift knob or an aftermarket knob. The throw reduction is around 25%. We have tested over and over different throw reductions, and we felt that the final version provided the best overall confidence in shifting. Made in the USA.
You can find this shifter at any of your local MTI Racing parts dealers.



THE ALL NEW MTI RACING V6 CAMARO SHIFTER


Stock self centering mechanism

Last edited by MTI Racing Kevin; 02-10-2010 at 11:08 AM.
MTI Racing Kevin is offline   Reply With Quote
Old 02-02-2010, 06:24 PM   #2
Icefsh
 
Icefsh's Avatar
 
Drives: CGM 2LT/RS M6
Join Date: Jul 2009
Location: Littleton, CO.
Posts: 185
Have heard good things about the six shooter! How much?
Icefsh is offline   Reply With Quote
Old 03-11-2010, 08:28 AM   #3
MTI Racing Kevin

 
MTI Racing Kevin's Avatar
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Marietta, GA
Posts: 525
BUMP
MTI Racing Kevin is offline   Reply With Quote
Old 03-12-2010, 08:31 PM   #4
ckaram

 
ckaram's Avatar
 
Drives: 2011 2SS RS, 1968 ragtop
Join Date: Apr 2009
Location: Indiana
Posts: 1,604
What's the real purpose of the bushings in your kit? Does it make that much a difference in the shifting or the feel? Doesn't seem like it would since these are for the shifter "base" for lack of better term.

Wonder if you just installed the shifter w/o the white bushings, would it feel "softer" like the way the stock one feels now but with the shorter throw?
__________________
1968 Camaro convertible, soon to be LS1 & T56, Magnaflows, 3.42 posi, 17" Torque Thrusts
2011 2SS/RS, LS3, M6, IOM in and out, factory Hurst short throw, GMPP axleback exhaust
ckaram is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Official Camaro Convertible CONCEPT Press Release Tran Camaro Convertible Forum 12 11-18-2009 07:05 PM
MTI Racing Camaro Shifter Now Available MTI Racing V8 Bolt-Ons & Tunes 2 10-12-2009 08:38 AM
MTI Racing TVS1900 601rwhp MTI Racing Forced Induction - V8 36 09-01-2009 07:32 PM
MTI Racing 500ci Dominator Engine Assembly MTI Racing Forced Induction - V8 10 08-28-2009 04:05 PM


All times are GMT -5. The time now is 12:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.