Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Grabiak Performance Center
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Vendor and Seller review / feedback / experiences

Vendor and Seller review / feedback / experiences Share review & feedback on vendors and sellers

Reply
 
Thread Tools
Old 02-24-2010, 10:44 PM   #1
mrray13


 
mrray13's Avatar
 
Drives: 2010 1LT RS Rally Yellow
Join Date: Oct 2009
Location: southern Illinois
Posts: 3,059
ARH LTs, Trifecta and nallen00

I gotta say when we looked at the ARH headers, my jaw dropped! They are beautiful! When compared to the JBAs that were on the car, you can see where the price difference comes from. From the fully smooth, polished flange to the primaries being machine shrunk instead of crimped pressed to fit the oval ports, smooth welds and polished internal tubes at the welds, the ARH headers are in a different league. Not dogging the JBA shorites at all, they are a great header for the price, but damn, the ARH lts are a cut above!! Thanks abunch to Nick @ ARH for helping making this happen.

Quickly, the cats were smooth and small, and all pipes fit together like a glove. Couple of issues we discovered, The flanges (we attacked the factory heat shields) need to be cut like the JBAs to clear the heat shields. No biggie, as we modded the heat shields. The o2 extensions plugs were wrong on the car side, again an easy fix. But those were the only issues with the ARH products, and might be due to the prototype status of the headers and extensions that I had.

Vince and Trifecta responded fast and pulled some decent numbers out of the car, with the mods. I look forward to another local dyno run and some more data logging to see how the tune and ECM get along with a few days working together, lol. Thanks Vince for helping making this happen.

Nate, aka nallen00, a big thanks goes out to you as well. The communication between you and Vince really helped make this work. Also, getting this setup and arranged, and pulled off, was a job well done. Thanks for helping pull this together and allowing me to be the "victim", lol.

All in all, don't be afraid to work with any of these folks! Great products backed by really good people, what more do ya need?

Will get some pics up soon of the headers, cats and install.
__________________
PacMan
mrray13 is offline   Reply With Quote
Old 03-30-2010, 11:17 PM   #2
RyanDenos89
RyanDenos89
 
Drives: 2010 Red LT1 RS
Join Date: Jun 2009
Location: rancho santa margarita ca
Posts: 160
u have a dyno sheat want to see some #s like the build
RyanDenos89 is offline   Reply With Quote
Old 03-31-2010, 09:49 PM   #3
mrray13


 
mrray13's Avatar
 
Drives: 2010 1LT RS Rally Yellow
Join Date: Oct 2009
Location: southern Illinois
Posts: 3,059
http://www.camaro5.com/forums/showth...&highlight=ARH


There ya go!
__________________
PacMan
mrray13 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:04 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.