Ok, I now have my wheels :D - Page 19 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*GTAHVIT* · 04-22-2010, 11:27 AM

Gotthat02fire · 04-22-2010, 11:27 AM

A risk you have to take with big wheels I've had no issues with PA roads its the roads out of state my wheels don't like!!

Quote:

Originally Posted by motorhead

If those wheels could get out of round during shipping , I would hate to see what would happen to them on PA roads with all the more rubber is between them and the road.
Anyway I hope you get it taken care of.

Nine Ball · 04-22-2010, 12:28 PM

WTH with the finger story? Your Camaro bit you!

Darth_Emma · 04-22-2010, 12:29 PM

I really had no idea that 22" wheels run this risk. Maybe I should have stayed with 20s? Nah! Those 22" wheels look too sweet.

PQ · 04-22-2010, 12:39 PM

Quote:

Originally Posted by Nine Ball

WTH with the finger story? Your Camaro bit you!

Yup. It was telling me to just send the damn wheels and leave me alone till they get back. lol

It really was stupid.

Quote:

Originally Posted by Darth_Emma

I really had no idea that 22" wheels run this risk. Maybe I should have stayed with 20s? Nah! Those 22" wheels look too sweet.

Oh,ya. SAAAAAWEEEET!

Gotthat02fire · 04-22-2010, 12:47 PM

Sounds like that hurt video please!!!!!

PQ · 04-22-2010, 12:56 PM

Quote:

Originally Posted by Gotthat02fire

Sounds like that hurt video please!!!!!

I'll load it to youtube.

Scott@Bjorn3D · 04-22-2010, 01:00 PM

OMG. I can't beleive it. PQ has to be my long lost brother. And by they way,

You Are An Idiot

Darth_Emma · 04-22-2010, 01:08 PM

omg! poor PQ! (I can't wait to see/hear that video!)

*mlee* · 04-22-2010, 01:16 PM

OMFG... I wish I could laugh as the saga continues, but this one is not funny... Sorry to hear. OUCH

PQ · 04-22-2010, 01:36 PM

I'm uploading the vid now. lol

It happens in the first couple seconds. I'm pretty loud in the vid so might want to turn it down after the 'Snap', oh and the there is nothing for the rest of the vid until the last two seconds and you'll here me pretty much sum it up right there. (F-word warning.)

But, BOT, I am going to upload the vids of the wheels too, so you guys can tell me what you think.

PQ · 04-22-2010, 02:11 PM

Ok, here is one of the wheels. This is what I was trying to capture. My purpose for the vids was to ask you tire guys if this is real bad or moderately bad. The bead psrt moves as well. This is not just the high lip because the whole tire moved with the rim at the shop.

The 'Other' vid is loading.

*GTAHVIT* · 04-22-2010, 03:43 PM

PQ

We're friends and all... But I promise if you post the vid in quiestion......

Bad things will happen......

I'm not saying what... but

I'm just sayin....

*GTAHVIT* · 04-22-2010, 03:44 PM

PQ · 04-22-2010, 03:49 PM

Quote:

Originally Posted by GTAHVIT

PQ

We're friends and all... But I promise if you post the vid in quiestion......

Bad things will happen......

I'm not saying what... but

I'm just sayin....

You don't scare me. hahaha

There is no visual of it anyway. Just audio. And it makes even ME cringe, and I'm the one who lived it. hahaha

Blood drops hit me neck and face when it happened. But the vid didn't get it.

Surely you want to here me scream??? Right??? Seeing as you hate me. hahaha

guiLT · 04-22-2010, 03:51 PM

Nice wheels PQ!

*GTAHVIT* · 04-22-2010, 03:56 PM

Quote:

Originally Posted by PQ

You don't scare me. hahaha

There is no visual of it anyway. Just audio. And it makes even ME cringe, and I'm the one who lived it. hahaha

Blood drops hit me neck and face when it happened. But the vid didn't get it.

Surely you want to here me scream??? Right??? Seeing as you hate me. hahaha

NO! I don't want to hear it.... cmon what kind of blood and guts sicko do you take me for....

Ok OK I'm kinda curious... But damn... man... Not really...

Ok just PM them the link please...

PQ · 04-22-2010, 04:15 PM

Quote:

Originally Posted by GTAHVIT

Ok just PM them the link please...

Sent.

Ok, I've jacked my thread.

So back on topic.

What do you think of the vid a few posts ago?

*Mr. Wyndham* · 04-22-2010, 04:19 PM

Quote:

Originally Posted by PQ

Sent.

Ok, I've jacked my thread.

So back on topic.

What do you think of the vid a few posts ago?

Now I'm curious....linky?

As to the spinning wheel...I have absolutely zero experience with this...but that would seem to give you quite a vibration going down the road...not to mention the toll the suspension would take.

PQ · 04-22-2010, 04:55 PM

Quote:

Originally Posted by Dragoneye

Now I'm curious....linky?

As to the spinning wheel...I have absolutely zero experience with this...but that would seem to give you quite a vibration going down the road...not to mention the toll the suspension would take.

I think Chris is posting it in ya'lls area.

*CamaroSpike23* · 04-22-2010, 04:58 PM

Quote:

Originally Posted by GTAHVIT

PQ

We're friends and all... But I promise if you post the vid in quiestion......

Bad things will happen......

I'm not saying what... but

I'm just sayin....

what if I post it? and edit it?

PQ · 04-22-2010, 05:11 PM

Quote:

Originally Posted by CamaroSpike23

what if I post it? and edit it?

hahahahahaha

Darth_Emma · 04-22-2010, 05:16 PM

I thought this was PQ's wheels thread? We must know ALL!

How is your hand, PQ? Are you in a cast? I bet you're glad you got the automatic!

Nine Ball · 04-22-2010, 05:27 PM

I'm not going to watch the finger vid.

Spinning wheel thread does have a little hi/low to it, but I've seen much worse balance out perfectly. I think my own 22s are worse than that, but they ride perfectly.

PQ · 04-22-2010, 05:34 PM

Quote:

Originally Posted by Darth_Emma

I thought this was PQ's wheels thread? We must know ALL!

How is your hand, PQ? Are you in a cast? I bet you're glad you got the automatic!

Hadn't thought of it that way. Ya, the auto is pretty sweet right now. hahaha, Hand hurts like a .............well.........it hurts.

Quote:

Originally Posted by Nine Ball

I'm not going to watch the finger vid.

Spinning wheel thread does have a little hi/low to it, but I've seen much worse balance out perfectly. I think my own 22s are worse than that, but they ride perfectly.

But even if they balance, if the rim is going up and down, the road will pick it up, right? The tire was going up and down as well. If the tire and rim aren't round, how can they ride good? I'm confused.

04-22-2010, 11:27 AM	#451
GTAHVIT One Lucky Guy. Drives: #22 Tom Henry Racing 2010 2SS/RS Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,318 View My Garage	__________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

04-22-2010, 12:28 PM	#453
Nine Ball Drives: 1969 & 2011 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,732	WTH with the finger story? Your Camaro bit you! __________________ www.DV8Motoring.com - Forged Wheels & Customs Email: Tony@DV8Motoring.com

04-22-2010, 12:29 PM	#454
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 13,308 View My Garage	I really had no idea that 22" wheels run this risk. Maybe I should have stayed with 20s? Nah! Those 22" wheels look too sweet. __________________

04-22-2010, 01:00 PM	#458
Scott@Bjorn3D Drives: Kami, 2013 2SS LS3 Luvin Join Date: Oct 2008 Location: Eufaula, Alabama Posts: 5,384	OMG. I can't beleive it. PQ has to be my long lost brother. And by they way, You Are An Idiot __________________

04-22-2010, 01:08 PM	#459
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 13,308 View My Garage	omg! poor PQ! (I can't wait to see/hear that video!) __________________

04-22-2010, 12:47 PM	#456
Gotthat02fire Drives: 2010 Camaro 1ss IOM Join Date: May 2009 Location: Williamsport,PA Posts: 2,134 View My Garage	Sounds like that hurt video please!!!!!

04-22-2010, 01:16 PM	#460
mlee H-Town Camaro Club Drives: Number Twenty-Three Join Date: Oct 2008 Location: Conroe, TX Posts: 18,782 View My Garage	OMFG... I wish I could laugh as the saga continues, but this one is not funny... Sorry to hear. OUCH __________________ .

04-22-2010, 01:36 PM	#461
PQ Drives a Maro Drives: Hybrid SS Camaro Join Date: Apr 2008 Location: Mobile, AL Posts: 35,545 View My Garage	I'm uploading the vid now. lol It happens in the first couple seconds. I'm pretty loud in the vid so might want to turn it down after the 'Snap', oh and the there is nothing for the rest of the vid until the last two seconds and you'll here me pretty much sum it up right there. (F-word warning.) But, BOT, I am going to upload the vids of the wheels too, so you guys can tell me what you think. __________________ PEDDERS NO BULL/BeckyD@RodgersChevrolet.................................................. .....

04-22-2010, 02:11 PM	#462
PQ Drives a Maro Drives: Hybrid SS Camaro Join Date: Apr 2008 Location: Mobile, AL Posts: 35,545 View My Garage	Ok, here is one of the wheels. This is what I was trying to capture. My purpose for the vids was to ask you tire guys if this is real bad or moderately bad. The bead psrt moves as well. This is not just the high lip because the whole tire moved with the rim at the shop. The 'Other' vid is loading. __________________ PEDDERS NO BULL/BeckyD@RodgersChevrolet.................................................. .....

04-22-2010, 03:43 PM	#463
GTAHVIT One Lucky Guy. Drives: #22 Tom Henry Racing 2010 2SS/RS Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,318 View My Garage	PQ We're friends and all... But I promise if you post the vid in quiestion...... Bad things will happen...... I'm not saying what... but I'm just sayin.... __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

04-22-2010, 03:44 PM	#464
GTAHVIT One Lucky Guy. Drives: #22 Tom Henry Racing 2010 2SS/RS Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,318 View My Garage	__________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

04-22-2010, 03:51 PM	#466
guiLT Tampa Gulf Coast Family Drives: 2001 Maxima Join Date: Oct 2009 Location: Tampa, Florida Posts: 6,638 View My Garage	Nice wheels PQ! __________________

04-22-2010, 05:16 PM	#473
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 13,308 View My Garage	I thought this was PQ's wheels thread? We must know ALL! How is your hand, PQ? Are you in a cast? I bet you're glad you got the automatic! __________________

04-22-2010, 05:27 PM	#474
Nine Ball Drives: 1969 & 2011 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,732	I'm not going to watch the finger vid. Spinning wheel thread does have a little hi/low to it, but I've seen much worse balance out perfectly. I think my own 22s are worse than that, but they ride perfectly. __________________ www.DV8Motoring.com - Forged Wheels & Customs Email: Tony@DV8Motoring.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for replicas/similar wheels - Please Help!	MiamiCane	Wheels and Tires Talk Sponsored by The Tire Rack	3	03-27-2010 07:20 PM
VIP Forged Wheels For Sale	EVS Motors Inc.	Wheels / Tires	45	01-19-2010 05:13 PM
Wheels! Your Camaro needs forged wheels.	Nine Ball	Wheels / Tires	42	12-21-2009 10:51 AM
Anyone in FL replace their wheels?	FunkyELF	USA - Southeast	1	07-29-2009 05:44 PM