Pfadt Strut Tower Brace INTRO Sale - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

IPS Brandon · 03-10-2010, 09:28 AM

As part of our commitment to serve this market, and have the best parts on hand to deliver to our racing clients; we have yet added another.

Pfadt has now released their new strut tower brace which is an amazing sight in person. We have already received several units, and are shipping them bare and coated!

(here they are ready to roll bare, coated versions with in a week)

Here are some quick specifics
-4 point chassis brace to reduce strut tower deflection under hard cornering/braking
-weighs 8 pounds
- very easy install, no need to remove strut
-clears Magnusen supercharger(photos showing this coming in the next day or two)
-made in the usa
-available bare or powdercoated silver

Installed

Installation is very easy, and all tools, and pieces are included to make this a nice and easy install for the DIYer.

These are being sold for $335 shipped currently (as always I encourage any one to PM us for C5 Member pricing)

Let me know if any one has any questions, and or concerns

Regards

2010 2-Tone · 03-10-2010, 09:39 AM

Please pm me the C5 price. Powdercoated. Thanks Guys,

IPS Brandon · 03-10-2010, 09:44 AM

Quote:

Originally Posted by 2010 2-Tone

Please pm me the C5 price. Powdercoated. Thanks Guys,

PM sent , thank you!

Michael_Js · 03-10-2010, 09:56 AM

You write - easy install. Is is true that these require drilling the top of the fender well on each side?

Thanks,
Michael J.

camarowa · 03-10-2010, 09:58 AM

please pm the c5 price, powdercoated. Thanks.

IPS Brandon · 03-10-2010, 10:15 AM

Quote:

Originally Posted by Michael_Js

You write - easy install. Is is true that these require drilling the top of the fender well on each side?

Thanks,
Michael J.

It to me is a very easy to install, and to a DIYer I would consider moderate difficulty, because yes there is a little drilling for the riv-nut install, but it is very simplistic and difficult to do incorrectly, especially with the great instructions Pfadt has created. The tool in included to complete the install so no concern either with not having the specialty piece.

I will also quote them
"Hey everyone, just a little more info on this. This piece was designed to install with rivnuts. Rivnuts are a very common fastener used throughout the OEM GM chassis. This is just another point where they can be used to benefit the chassis strength. We did this for a number of reasons. One is because straddling the strut tower on either side creates a very strong relationship between both the left and right strut towers. The second is that there is really no existing holes to bolt to. The third is because we didn't want to potentially interfere with aftermarket coilovers etc, and bolt through the top near the OEM strut top.

We understand the hesitation to drill holes in your chassis. Not everyone will be comfortable with using a drill to properly install this Strut Tower Brace. But please take into consideration that there are no structural risks you are taking. You are doing quite the opposite. This is a common practice used in OEM manufacturing and motorsport chassis engineering."

Regards

Michael_Js · 03-10-2010, 10:24 AM

Ok, cool, thanks!

IPS Brandon · 03-10-2010, 03:52 PM

Quote:

Originally Posted by Michael_Js

Ok, cool, thanks!

Not a problem. Thanks for all the PM's gentlemen, I can tell this is going to be a popular addition to a lot of these chassis's!

-Regards

Michael_Js · 03-10-2010, 06:51 PM

PM me a price please Brandon

Thanks

King T · 03-10-2010, 07:51 PM

Could I get a PM on the price please? Powdercoated and bare price please

Longhorn SS · 03-10-2010, 10:50 PM

PM me powdercoated price, please.

FRKNlo · 03-10-2010, 11:21 PM

can I get a total shipped to 96706, bare and powdercoated?

IPS Brandon · 03-11-2010, 08:43 AM

I have sent out all my PM's to those who have requested, thank you!

If any one has any questions let me know

Regards

FRKNlo · 03-11-2010, 10:59 AM

Ordered

Thanks Brandon

IPS Brandon · 03-12-2010, 04:01 PM

Thanks for the orders guys! I cant wait to meet everyone down at the festival, and see all these products in action!

For those interested don't hesitate on asking me any questions, or if you have any concerns

-Regards

IPS Brandon · 03-17-2010, 09:17 AM

Coated units are now in transit! PM me if you have any questions.

Regards

IPS Brandon · 04-20-2010, 01:13 PM

So many of you complimented on this bar at the camaro5fest, I wanted to re-hit this topic!

let me know if any one has any questions

Regards

Rookie13 · 04-20-2010, 09:52 PM

Can you do this in Black PC?

IPS Brandon · 04-21-2010, 05:16 PM

Quote:

Originally Posted by Rookie13

Can you do this in Black PC?

Absolutley, in fact they come in black powder coat, its more of a flat color though. If you want gloss black you can get them bare and have them coated to match what ever you like.

bossbunny · 04-21-2010, 06:42 PM

Do you know if it will for sure clear a v6 engine? Because I bought a BMR 4pt and it wouldnt.

Mojave · 04-22-2010, 08:57 AM

Send me a price to 40513

IPS Brandon · 04-22-2010, 03:57 PM

Quote:

Originally Posted by badgebunny

Do you know if it will for sure clear a v6 engine? Because I bought a BMR 4pt and it wouldnt.

BMR goes behind by the firewall which is what the issue is on the v6.

Luckily this is no concern with Pfadt's brace, it will clear and fit and look great on your V6.

Regards

DrVonkle · 04-28-2010, 12:21 PM

pm price please and springs

bluedevil02 · 04-28-2010, 12:43 PM

price shipped on both options to 78247 plz

IPS Brandon · 04-28-2010, 01:08 PM

Pm's sent.

Regards

03-10-2010, 09:28 AM	#1
IPS Brandon Drives: 2010 Camaro SS black Join Date: Aug 2009 Location: Columbus Ohio Posts: 900	Pfadt Strut Tower Brace INTRO Sale As part of our commitment to serve this market, and have the best parts on hand to deliver to our racing clients; we have yet added another. Pfadt has now released their new strut tower brace which is an amazing sight in person. We have already received several units, and are shipping them bare and coated! (here they are ready to roll bare, coated versions with in a week) Here are some quick specifics -4 point chassis brace to reduce strut tower deflection under hard cornering/braking -weighs 8 pounds - very easy install, no need to remove strut -clears Magnusen supercharger(photos showing this coming in the next day or two) -made in the usa -available bare or powdercoated silver Installed Installation is very easy, and all tools, and pieces are included to make this a nice and easy install for the DIYer. These are being sold for $335 shipped currently (as always I encourage any one to PM us for C5 Member pricing) Let me know if any one has any questions, and or concerns Regards

03-10-2010, 09:56 AM	#4
Michael_Js SoCal C5 Family Member Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009 Location: San Diego, CA, USA Posts: 5,329 View My Garage	You write - easy install. Is is true that these require drilling the top of the fender well on each side? Thanks, Michael J. __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ 2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; Subthump; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;

03-10-2010, 09:58 AM	#5
camarowa Drives: 2013 SVT Raptor, sold 2010 Camaro Join Date: Jul 2009 Location: PNW....almost canada Posts: 1,867	please pm the c5 price, powdercoated. Thanks. __________________ - Pfadt Suspension Package; Springs & Sways - Brembo Brake Upgrade (Yellow); Courtesy Fesler Built - Custom Magnaflow Exhaust - Blacked-Out Bowties & RS Emblems, Front bowtie delete - Full Dynamat Extreme Trunk Coverage - Tinted side markers - Interior DSV Customs Leather Upgrades - Airaid CAI V2 - Forgestar F14 Gunmetal 20x9, 20x11 - Doug Thorley Shorties

03-10-2010, 10:24 AM	#7
Michael_Js SoCal C5 Family Member Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009 Location: San Diego, CA, USA Posts: 5,329 View My Garage	Ok, cool, thanks! __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ 2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; Subthump; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;

03-10-2010, 06:51 PM	#9
Michael_Js SoCal C5 Family Member Drives: 2010 Camaro SS/RS - Black w/IOM; 6M Join Date: Jul 2009 Location: San Diego, CA, USA Posts: 5,329 View My Garage	PM me a price please Brandon Thanks __________________ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ 2010 Black 2SS/RS; 6M; IOM, GFX, sunroof; ADM Race CAI; Zoomers CB; Viper Alarm; Pdaft F&R sways, Adj Endlinks, Rtrailing arms, Camber kit, strut brace, Front Trailing Arm Bushing; SLP Skip-Shift Elim; Tinted lights/windows; Hurst Short-throw; LoJack; Door & Dash ABL Mods; Subthump; JBA Shorty headers; AACStyle LEDs; Stillen DS rotors, Hawk Ceramic pads; Havoc Blk Chrome wheels: 20x9s; Lingenfelter Blk Al Pedals; RevXtreme Catch Can; Goodridge SS lines; Ported TB; RK Sport hood; Hotchkis chassis brace; KW V3 coilovers;

03-10-2010, 09:39 AM	#2
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,293 View My Garage	Please pm me the C5 price. Powdercoated. Thanks Guys,

03-10-2010, 07:51 PM	#10
King T Drives: 2010 2SS, 2011 Buick Regal Turbo Join Date: Mar 2009 Location: Nashville, Tennessee Posts: 679	Could I get a PM on the price please? Powdercoated and bare price please __________________

03-10-2010, 10:50 PM	#11
Longhorn SS Drives: 2010 IOM Camaro SSRS L99 Join Date: Sep 2009 Location: Katy, TX Posts: 63 View My Garage	PM me powdercoated price, please. __________________ 2010 Camaro 2SS/RS - Roto-Fab CAI, ARH 1-3/4" LTs w/cats, LMR tune, KW V3 coilovers, Pfadt F&R sway bars, end links, rear trailing arms, tie rods, solid subframe bushings, HPS brake pads

03-10-2010, 11:21 PM	#12
FRKNlo Drives: VStar 1100 Classic, 2010 CGM 2SS/RS Join Date: Mar 2009 Location: GMT -10hrs Posts: 408 View My Garage	can I get a total shipped to 96706, bare and powdercoated? __________________ Kooks+Noweeds+Stock Muffler Clip

03-11-2010, 08:43 AM	#13
IPS Brandon Drives: 2010 Camaro SS black Join Date: Aug 2009 Location: Columbus Ohio Posts: 900	I have sent out all my PM's to those who have requested, thank you! If any one has any questions let me know Regards

03-11-2010, 10:59 AM	#14
FRKNlo Drives: VStar 1100 Classic, 2010 CGM 2SS/RS Join Date: Mar 2009 Location: GMT -10hrs Posts: 408 View My Garage	Ordered Thanks Brandon __________________ Kooks+Noweeds+Stock Muffler Clip

03-12-2010, 04:01 PM	#15
IPS Brandon Drives: 2010 Camaro SS black Join Date: Aug 2009 Location: Columbus Ohio Posts: 900	Thanks for the orders guys! I cant wait to meet everyone down at the festival, and see all these products in action! For those interested don't hesitate on asking me any questions, or if you have any concerns -Regards

03-17-2010, 09:17 AM	#16
IPS Brandon Drives: 2010 Camaro SS black Join Date: Aug 2009 Location: Columbus Ohio Posts: 900	Coated units are now in transit! PM me if you have any questions. Regards

04-20-2010, 01:13 PM	#17
IPS Brandon Drives: 2010 Camaro SS black Join Date: Aug 2009 Location: Columbus Ohio Posts: 900	So many of you complimented on this bar at the camaro5fest, I wanted to re-hit this topic! let me know if any one has any questions Regards

04-20-2010, 09:52 PM	#18
Rookie13 Hooked on AutoX Drives: 1SS/RS Join Date: Jul 2009 Location: NE Kansas Posts: 400 View My Garage	Can you do this in Black PC? __________________ _________________________ Camaro5 Fest 2010 Panogram Photo of the Host Hotel

04-21-2010, 06:42 PM	#20
bossbunny Mrs. Bunny to you Drives: The Sassiest V6 in the South! Join Date: May 2009 Location: Cut 'N Shoot Texas Posts: 24,435	Do you know if it will for sure clear a v6 engine? Because I bought a BMR 4pt and it wouldnt.

04-22-2010, 08:57 AM	#21
Mojave Drives: 2013 300C HEMI, 2012 Ram 4X4 HEMI Join Date: May 2009 Location: Temecula, CA Posts: 1,314 View My Garage	Send me a price to 40513 __________________ Ordered 2014 1SS 1LE NPP Recaros Backup Cam Sunroof AGM: Status 1100: June 7 Status 2500: June 11 Status 3000: June 12 TPW July 15

04-28-2010, 12:21 PM	#23
DrVonkle Drives: 2010 Camaro 2SS/RS Join Date: Oct 2009 Location: SoCal Posts: 239	pm price please and springs

04-28-2010, 12:43 PM	#24
bluedevil02 Drives: 2LT/RS Join Date: Jul 2009 Location: San Antonio Posts: 819	price shipped on both options to 78247 plz

04-28-2010, 01:08 PM	#25
IPS Brandon Drives: 2010 Camaro SS black Join Date: Aug 2009 Location: Columbus Ohio Posts: 900	Pm's sent. Regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pfadt Race Engineering DIY Drop Spring installation procedure	PfadtRacing	Suspension / Chassis / Brakes	20	09-23-2011 09:31 PM
Pfadt new Strut Tower Brace release information	PfadtRacing	Suspension / Brakes / Chassis	42	04-10-2010 10:26 PM
Pfadt Strut Tower Brace SPY Shots and poll!	PfadtRacing	Suspension / Brakes / Chassis	29	11-17-2009 11:17 AM
Pfadt Strut Tower Brace & Coil Overs in GM SEMA booth	Aaron Pfadt	Suspension / Brakes / Chassis	5	11-13-2009 12:18 PM
Pfadt Strut Tower Brace & Coil Overs in GM SEMA booth	Aaron Pfadt	Suspension / Chassis / Brakes	1	11-11-2009 05:10 PM