Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Dyno Max
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetics and Lighting Modification Discussions

Cosmetics and Lighting Modification Discussions External and Internal cosmetics modifications.

Reply
 
Thread Tools
Old 03-13-2010, 05:05 PM   #1
TRSS2
 
TRSS2's Avatar
 
Drives: 2010 Chevy Camaro 2LT Black RS
Join Date: May 2009
Location: Lynn Haven, FL
Posts: 103
Opinion/preferred wheel well light install...

I bought some wheel well lighting that has 3m adhesive on the back, so mounting will be easy, the main question is what wires are most of ya'll tapping into for footwell lighting? I was hoping to tap into the dome light, so that when I unlock the car the lights will turn on, also when the doors are open. Will that be possible from the fuse box under the hood, or will i need to access the wire harness under the driver side in the cabin (which is where I tapped into the dome light wire for my footwell lights, how will the load be if i use that same line for 2 footwell light and 4 1 foot strips of led wheel well lights?...) Any opinions/suggestions are welcome, thanks for your time and input.
__________________
2010 2LT/RS Black(exterior) on Black(Interior Leather) on Black(Flat Black Powdercoated Rims)
AAC interior red dome lights, footwell lights, SMD wheel well lights, led pods, afterburners(SMD), RED/WHITE halo headlights and fog lights, Nite Rider scanner times 2, illuminated bowtie, T-REX black phantom billet grill upper and lower, had vinyl blackouts-they turned out to be illegal . Soon to have LTLAudio door projectors.

Last edited by TRSS2; 03-13-2010 at 05:06 PM. Reason: forgot to opt for email updates
TRSS2 is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Alternative way to install dashboard ABL (with light tape) FIREWOLFF Cosmetics and Lighting Modification Discussions 96 04-27-2014 02:24 PM
How do you remove and install fog light fixtures in new camaro Aristomones Camaro DIY & HOW-TO instructions & discussions 18 04-04-2014 04:19 PM
Tires loosing pressure joepitt Wheels and Tires Talk Sponsored by The Tire Rack 22 12-11-2010 05:00 PM
Some Texas Lighting Laws Mecha USA - Texas 5 10-20-2009 01:49 PM
DIY: Here it is Dashboard ambient lighting ABL Tecca Camaro DIY & HOW-TO instructions & discussions 356 09-03-2009 10:46 AM


All times are GMT -5. The time now is 09:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.