FBodfather...How does the show team get black to look this good!?! - Page 3 - Camaro Forum - 2010 Camaro / Camaro Z28 SS Forums

SAE05 · 01-15-2009, 07:50 PM

This being a basecoat clearcoat, the color goes on very flat. Controlling the mil thickness of clear is key. In this case the clear could have gone on heavy which based on process parameters is very marginal.

Any of you familiar with the 04-06 GTO clearcoat thickness, that was one of the thinnest I have seen in a while. Chip ahoy.

It is quite easy to wet sand that clear with 1200-1500 grit paper then polish it out. I have done it many times. In this case you would not color sand unless it was an acrylic or a single stage finish prior to clear.

I have see some great factory paint and this being the car that it is, perhaps those manufacturing process engineers spent extra time dialing it in.

themossman · 01-16-2009, 01:30 AM

Quote:

Originally Posted by JameSS

Very easy to obtain, just takes time and LOTS and LOTS of coats of ZAINO!!!

You will obtain that mirror finish you are looking for. This is without a doubt the best stuff I have used.

Here is the link: http://www.zainostore.com/Merchant2/merchant.mvc

another vote for zaino...

zaino is as good and safe as it gets and EXCELLENT support. Sal Zaino called me direct when I sent an email with an 'issue'....can't beat that for service!

My M3 after several coats of zaino....

and a shot at dusk to show 'depth'...when I see these pics...it's got me consider switching my 'silver' order to cyber grey....

JMAN311 · 01-16-2009, 01:45 AM

^^^ Nice looking ride themossman

Based on your current ride I agree that you should switch to the cyber gray.

TomServo · 01-16-2009, 12:19 PM

Quote:

Originally Posted by Dragoneye

Does Zaino's process hurt the clearcoat? I don't doubt the result -- but I mean, how often can you do this until you're down to the raw paint? The whole clay-bar things makes me a little nervous...

NO, Zaino is a POLISH, not an abrasive product. I have used nothing but Zaino since 1995.

Go visit their web site for more info. I had a quetion some years ago and posted it on the Corvette Forum. Out of the bule I get an e-mail from Sal Zaino himself. Talk about a car guy, none finer as are their products.

*Moose* · 01-16-2009, 01:24 PM

There are many opinions as well as a good number of products available for maintaining the appearance.

Personally, I prefer Zaino. Here are a few cars I've detailed using Zaino:

matt55 · 01-16-2009, 02:36 PM

1 more for Zaino ,

PQ · 01-19-2009, 05:20 PM

I just have the kid next door wash mine when I din't feel like it.

Or when my son pisses me off.

01-15-2009, 07:50 PM	#51
SAE05 inconspicuous observer 9 Drives: 05 GTO Join Date: Jul 2008 Location: Dayton Posts: 148	This being a basecoat clearcoat, the color goes on very flat. Controlling the mil thickness of clear is key. In this case the clear could have gone on heavy which based on process parameters is very marginal. Any of you familiar with the 04-06 GTO clearcoat thickness, that was one of the thinnest I have seen in a while. Chip ahoy. It is quite easy to wet sand that clear with 1200-1500 grit paper then polish it out. I have done it many times. In this case you would not color sand unless it was an acrylic or a single stage finish prior to clear. I have see some great factory paint and this being the car that it is, perhaps those manufacturing process engineers spent extra time dialing it in. __________________ _________________________________ Dodges . . . we don't need no stinking Dodges `O~O>

01-16-2009, 01:45 AM	#53
JMAN311 Drives: 2010 Camaro SS Join Date: May 2008 Location: Western Nebraska...Soon to be Colorado Posts: 1,451	^^^ Nice looking ride themossman Based on your current ride I agree that you should switch to the cyber gray. __________________ 2SS/RS \| CGM Exterior \| Gray Interior \| 6-spd \| 1100 - 10/21/08 (Preliminary Order Accepted) 2000 - 8/17/09 (Accepted by GM) 2500 - 8/18/09 (Preferenced) 3000 - 8/18/09 (Accepted by Production Control) 3100 - 8/24/09 (Available to Sequence) 3300 - 8/24/09 (Scheduled for Production) TPW = 9/7 3400 - 8/29/09 (Broadcast) 3800 - 9/10/09 (Produced) 4000 - 9/10/09 (Available to Ship) 4150 - 9/10/09 (Invoiced) 4B00 - 9/10/09 (Bayed) 4200 - 9/10/09 (Shipped) Delivered to dealer 9/23/09

01-16-2009, 02:36 PM	#56
matt55 Wish-I-had-one Drives: 2006 Evo IX , 2009 Acura MDX Join Date: Aug 2008 Location: Raleigh NC Posts: 259	1 more for Zaino , Attached Images __________________ Last edited by matt55; 01-18-2009 at 08:38 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM Style pre-Detroit show event to feature cars and stars	KILLER74Z28	5th Gen Camaro SS LS LT General Discussions	19	03-29-2008 02:01 PM
Edmunds.com review of Holden Commodore... good info.	LSxcellent	General Automotive + Other Cars Discussion	6	07-23-2007 08:49 PM
GM offers sneak peek of Detroit auto show display	KILLER74Z28	General Automotive + Other Cars Discussion	0	12-14-2006 09:25 PM
Global auto show scene in transition	KILLER74Z28	General Automotive + Other Cars Discussion	0	09-08-2006 06:40 PM

01-16-2009, 01:24 PM	#55
Moose Moderator Drives: '99 Camaro SS #1392 Join Date: Jun 2006 Location: Newtown, Pa. Posts: 3,076	There are many opinions as well as a good number of products available for maintaining the appearance. Personally, I prefer Zaino. Here are a few cars I've detailed using Zaino: