Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
ModBargains
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 03-31-2010, 11:54 AM   #1
ULTRAZLS1

 
ULTRAZLS1's Avatar
 
Drives: Black 2010 1SS M6
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 1,614
Strength is gone...(best price on SW headers)

Well...shes got 7xx miles on her now. I want headers....screw it. Im going to buy them very soon and just wait a couple thousand miles to install them (give the car just a little more time on warranty) and probably get the car tuned at livernois. Then probably next year Ill do h/c at this rate LOL.

I have decided on the SW headers that just came out which fit to the stock exhaust location. They have the best price on 2 inch that fit to stock location and are also stainless.

I want the 2 inch with off road lead pipes

part #CA11HDROR

byunspeed has a very good price and also includes free shipping.

Was going to give some others the chance to beat this price before pulling the trigger.
__________________
Performance Mods: PRC 250cc Aftermarket Casting Cylinder Heads, G6X3 Cam, Fast 102 Intake, Nick Williams 102 TB,Stainless Works 2" Long Tubes, Flowmaster AT Cat-Back, C.A.I. CAI/ADM Scoop, SLP UD Pulley, PFADT Springs/Sways/Rear Trailing Arms, Pedders Subframe Bushings, Energy Differential Mounts, Spohn Toe Links, BMR 2-Point STB, LSR Tunnel Brace, Hurst Short Throw, COR Velocity V3 Wheels, 305/35/20 Nitto NT555R's
Finishline Performance Dyno Tune-505 RWHP 464 RWTQ
ULTRAZLS1 is offline   Reply With Quote
Old 03-31-2010, 01:01 PM   #2
axis
Search Ninja
 
axis's Avatar
 
Drives: 2010 Black 2SS/RS A6
Join Date: Oct 2009
Location: Central Ark
Posts: 7,112
I believe Kooks now offers the same setup. The one place I checked had them for $10-20 more. Just another option for you.
__________________
2010 Black 2SS/RS A6
Halltech Yellowjacket fed
GPI modded intake manifold
Bo (knows) White ported TB
Kooks LT's/ Dynomax VT
Pfadted (springs/sways)
Dyno tuned by Rhino and GPI

I once parallel parked a train.
axis is offline   Reply With Quote
Old 03-31-2010, 01:13 PM   #3
ULTRAZLS1

 
ULTRAZLS1's Avatar
 
Drives: Black 2010 1SS M6
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 1,614
Any reason to expect better gains from kooks over SW?
__________________
Performance Mods: PRC 250cc Aftermarket Casting Cylinder Heads, G6X3 Cam, Fast 102 Intake, Nick Williams 102 TB,Stainless Works 2" Long Tubes, Flowmaster AT Cat-Back, C.A.I. CAI/ADM Scoop, SLP UD Pulley, PFADT Springs/Sways/Rear Trailing Arms, Pedders Subframe Bushings, Energy Differential Mounts, Spohn Toe Links, BMR 2-Point STB, LSR Tunnel Brace, Hurst Short Throw, COR Velocity V3 Wheels, 305/35/20 Nitto NT555R's
Finishline Performance Dyno Tune-505 RWHP 464 RWTQ
ULTRAZLS1 is offline   Reply With Quote
Old 03-31-2010, 01:26 PM   #4
KMSRS2SS
I lurk
 
KMSRS2SS's Avatar
 
Drives: 2010 SS/RS
Join Date: Aug 2009
Location: MI.
Posts: 310
Why 2 inch headers? I ask because when I shopped around, I heard some interesting stories on guys using 2 inch headers, they actually lost power across the board. 2 inch is probably overkill unless you're moving to a supercharger setup.
KMSRS2SS is offline   Reply With Quote
Old 03-31-2010, 01:41 PM   #5
ULTRAZLS1

 
ULTRAZLS1's Avatar
 
Drives: Black 2010 1SS M6
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 1,614
I am choosing 2 inch because in the Jannetty racing independent test the 2 inch headers made more power across the board on an otherwise stock car. The 2 inch even had the same power or slightly better down low as the 1 7/8.

So for me on a car that I will most likely add a cam and heads to later...I see no reason to stay with 1 7/8. I dont see any advantage to buying them. Even with the car the way it sits.
__________________
Performance Mods: PRC 250cc Aftermarket Casting Cylinder Heads, G6X3 Cam, Fast 102 Intake, Nick Williams 102 TB,Stainless Works 2" Long Tubes, Flowmaster AT Cat-Back, C.A.I. CAI/ADM Scoop, SLP UD Pulley, PFADT Springs/Sways/Rear Trailing Arms, Pedders Subframe Bushings, Energy Differential Mounts, Spohn Toe Links, BMR 2-Point STB, LSR Tunnel Brace, Hurst Short Throw, COR Velocity V3 Wheels, 305/35/20 Nitto NT555R's
Finishline Performance Dyno Tune-505 RWHP 464 RWTQ
ULTRAZLS1 is offline   Reply With Quote
Old 03-31-2010, 02:02 PM   #6
KMSRS2SS
I lurk
 
KMSRS2SS's Avatar
 
Drives: 2010 SS/RS
Join Date: Aug 2009
Location: MI.
Posts: 310
It's all good, just curious. I have family in Jackson, we can get together sometime and compare notes. We have similiar mods.

Take Care!
KMSRS2SS is offline   Reply With Quote
Old 03-31-2010, 02:42 PM   #7
ULTRAZLS1

 
ULTRAZLS1's Avatar
 
Drives: Black 2010 1SS M6
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 1,614
Cool.

So you dont currently live in jackson?

Yeah maybe we could get together with some other car guys some time. I have some friends with sports cars...

So it looks like no one wants to beat byunspeeds price...thats a shame...
__________________
Performance Mods: PRC 250cc Aftermarket Casting Cylinder Heads, G6X3 Cam, Fast 102 Intake, Nick Williams 102 TB,Stainless Works 2" Long Tubes, Flowmaster AT Cat-Back, C.A.I. CAI/ADM Scoop, SLP UD Pulley, PFADT Springs/Sways/Rear Trailing Arms, Pedders Subframe Bushings, Energy Differential Mounts, Spohn Toe Links, BMR 2-Point STB, LSR Tunnel Brace, Hurst Short Throw, COR Velocity V3 Wheels, 305/35/20 Nitto NT555R's
Finishline Performance Dyno Tune-505 RWHP 464 RWTQ
ULTRAZLS1 is offline   Reply With Quote
Old 03-31-2010, 02:54 PM   #8
X-treme Horsepower

 
X-treme Horsepower's Avatar
 
Drives: 2010 LSX Shootout World AM Finalist
Join Date: Sep 2009
Location: DFW, TX
Posts: 795
sending you a pm
X-treme Horsepower is offline   Reply With Quote
Old 03-31-2010, 03:53 PM   #9
SSMOORE
 
Drives: 69SS 396\375 HP
Join Date: Oct 2009
Location: MI
Posts: 27
I Live in Jackson also. Just got my Kooks headers in yesterday and still waiting on my exhaust. Maybe we all can get together sometime.

I see a black car sometimes on sandstone rd is that one of you guys?

Steve
SSMOORE is offline   Reply With Quote
Old 03-31-2010, 04:06 PM   #10
ULTRAZLS1

 
ULTRAZLS1's Avatar
 
Drives: Black 2010 1SS M6
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 1,614
I have been down it. But only a time or two. I actually live in Hanover. It is in jackson county...about 20-25 minutes from downtown jackson.

Damn small world so far and both of you guys have headers. I cant let that happen now can I.

SSMOORE...what does your car look like? I seen a white car with red or orange stripes a week or so ago by the panera restaurant. I think I may have waived but cant remember.
__________________
Performance Mods: PRC 250cc Aftermarket Casting Cylinder Heads, G6X3 Cam, Fast 102 Intake, Nick Williams 102 TB,Stainless Works 2" Long Tubes, Flowmaster AT Cat-Back, C.A.I. CAI/ADM Scoop, SLP UD Pulley, PFADT Springs/Sways/Rear Trailing Arms, Pedders Subframe Bushings, Energy Differential Mounts, Spohn Toe Links, BMR 2-Point STB, LSR Tunnel Brace, Hurst Short Throw, COR Velocity V3 Wheels, 305/35/20 Nitto NT555R's
Finishline Performance Dyno Tune-505 RWHP 464 RWTQ
ULTRAZLS1 is offline   Reply With Quote
Old 03-31-2010, 04:21 PM   #11
SSMOORE
 
Drives: 69SS 396\375 HP
Join Date: Oct 2009
Location: MI
Posts: 27
That was prolly me if it was around the 17th. I have a white and orange stripe 2ss m6. Im about 10 to 15 mins from you. I live close to the wooden spoon on sandstone rd right by m60 and moscow rd. Oh I have a pole barn with a lift and tons of tools .lol
SSMOORE is offline   Reply With Quote
Old 03-31-2010, 04:24 PM   #12
ULTRAZLS1

 
ULTRAZLS1's Avatar
 
Drives: Black 2010 1SS M6
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 1,614
Yep it was me I am sure of it.

Man your car is sweet as hell looking. Your combination was actually my second choice. I would have done it if the stripes were factory painted.

I also happen to have a pole barn, garage and lift

I dont let anyone work on my cars but me. Dyno tune is all I will let them do. I did H/C to my 98 and it was great. These motors are built to be modded. Very simple when you get to know them.
__________________
Performance Mods: PRC 250cc Aftermarket Casting Cylinder Heads, G6X3 Cam, Fast 102 Intake, Nick Williams 102 TB,Stainless Works 2" Long Tubes, Flowmaster AT Cat-Back, C.A.I. CAI/ADM Scoop, SLP UD Pulley, PFADT Springs/Sways/Rear Trailing Arms, Pedders Subframe Bushings, Energy Differential Mounts, Spohn Toe Links, BMR 2-Point STB, LSR Tunnel Brace, Hurst Short Throw, COR Velocity V3 Wheels, 305/35/20 Nitto NT555R's
Finishline Performance Dyno Tune-505 RWHP 464 RWTQ
ULTRAZLS1 is offline   Reply With Quote
Old 03-31-2010, 04:28 PM   #13
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 123,985
I can't wait to get my headers.
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 03-31-2010, 04:30 PM   #14
ULTRAZLS1

 
ULTRAZLS1's Avatar
 
Drives: Black 2010 1SS M6
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 1,614
Quote:
Originally Posted by 2010 SSRS View Post
I can't wait to get my headers.
Same here...but deep down I am just scared that I will break something after the tune and have no warranty :(. That is my kind of luck to a T
__________________
Performance Mods: PRC 250cc Aftermarket Casting Cylinder Heads, G6X3 Cam, Fast 102 Intake, Nick Williams 102 TB,Stainless Works 2" Long Tubes, Flowmaster AT Cat-Back, C.A.I. CAI/ADM Scoop, SLP UD Pulley, PFADT Springs/Sways/Rear Trailing Arms, Pedders Subframe Bushings, Energy Differential Mounts, Spohn Toe Links, BMR 2-Point STB, LSR Tunnel Brace, Hurst Short Throw, COR Velocity V3 Wheels, 305/35/20 Nitto NT555R's
Finishline Performance Dyno Tune-505 RWHP 464 RWTQ
ULTRAZLS1 is offline   Reply With Quote
Old 03-31-2010, 04:50 PM   #15
SSMOORE
 
Drives: 69SS 396\375 HP
Join Date: Oct 2009
Location: MI
Posts: 27
How many miles on the car so far?
SSMOORE is offline   Reply With Quote
Old 03-31-2010, 04:51 PM   #16
ULTRAZLS1

 
ULTRAZLS1's Avatar
 
Drives: Black 2010 1SS M6
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 1,614
Seven hundred and some change
__________________
Performance Mods: PRC 250cc Aftermarket Casting Cylinder Heads, G6X3 Cam, Fast 102 Intake, Nick Williams 102 TB,Stainless Works 2" Long Tubes, Flowmaster AT Cat-Back, C.A.I. CAI/ADM Scoop, SLP UD Pulley, PFADT Springs/Sways/Rear Trailing Arms, Pedders Subframe Bushings, Energy Differential Mounts, Spohn Toe Links, BMR 2-Point STB, LSR Tunnel Brace, Hurst Short Throw, COR Velocity V3 Wheels, 305/35/20 Nitto NT555R's
Finishline Performance Dyno Tune-505 RWHP 464 RWTQ
ULTRAZLS1 is offline   Reply With Quote
Old 03-31-2010, 04:54 PM   #17
SSMOORE
 
Drives: 69SS 396\375 HP
Join Date: Oct 2009
Location: MI
Posts: 27
I just turned 900 miles driving out to Concord.
SSMOORE is offline   Reply With Quote
Old 03-31-2010, 06:32 PM   #18
kaler
 
kaler's Avatar
 
Drives: 2011 Dodge 3500 dually Mega Cab
Join Date: Jul 2009
Location: discovery bay,ca
Posts: 668
I'm not sure if it is lower than byunspeed, Maryland speed has SW 2" primary's with off road pipes for $919 shipped best deal I have found on them I just need to pull the trigger.
kaler is offline   Reply With Quote
Old 03-31-2010, 07:27 PM   #19
ULTRAZLS1

 
ULTRAZLS1's Avatar
 
Drives: Black 2010 1SS M6
Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 1,614
Byunspeed is 918 shipped

XTREME may be able to beat this if you talk to them.
__________________
Performance Mods: PRC 250cc Aftermarket Casting Cylinder Heads, G6X3 Cam, Fast 102 Intake, Nick Williams 102 TB,Stainless Works 2" Long Tubes, Flowmaster AT Cat-Back, C.A.I. CAI/ADM Scoop, SLP UD Pulley, PFADT Springs/Sways/Rear Trailing Arms, Pedders Subframe Bushings, Energy Differential Mounts, Spohn Toe Links, BMR 2-Point STB, LSR Tunnel Brace, Hurst Short Throw, COR Velocity V3 Wheels, 305/35/20 Nitto NT555R's
Finishline Performance Dyno Tune-505 RWHP 464 RWTQ
ULTRAZLS1 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:41 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.