Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
ADM PERFORMANCE
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis

Suspension / Brakes / Chassis All suspension, brakes and chassis discussions.

Reply
 
Thread Tools
Old 03-31-2010, 09:27 PM   #1
PfadtRacing
 
PfadtRacing's Avatar
 
Drives: 2010 Camaro, 2006 Z06
Join Date: Feb 2009
Location: SLC, UT
Posts: 3,375
Pfadt VIDEO of Poly Differential Mount Testing

The Pfadt Poly Differential Mount Kit is an integral upgrade to the driveline of your Camaro, to dial out wheel-hop, and to help transmit your horsepower to the ground. We wanted to share a video with the community showing some brief testing on this kit. We have been getting together all of the various videos of us testing our products, and the performance gains. It is really coming together now with this fantastic new video highlighting the bushing deflections in the OEM differential mounts.

In the video below, you are going to see shots of two cars, one running with the OEM mounts, and one with the Pfadt Poly Differential Mount Kit installed. It may not be as clear as our subframe video that we put together, but as you will see with the pointers (inserted), once you know where to look, it is very obvious the performance gains accomplished by our kit.

An important thing to remember is that both before and after videos are done on a car that has OEM subframe mounts, and as a result, there is a lot of overall movement of the differential. This is not the point of our video, rather, we want to isolate differential travel relative to the subframe. And when you take a look at that, you will be convinced of what the Pfadt Racing Poly Differential Kit can do for your differential.

We now offer our Poly Differential Kit in TWO versions to suit all of our potential customers: Street and Race Durometers. Need to know which one to buy? Just give us some info on your performance goals and ask us! We are here to help and provide great videos like this! Watch it in HD!


PfadtRacing is offline   Reply With Quote
Old 04-01-2010, 12:11 AM   #2
Jeanius


 
Jeanius's Avatar
 
Drives: Blk/Blk LS3 SS
Join Date: Dec 2006
Location: Golden State
Posts: 2,458


Thanks for not just TELLING us they work, but SHOWING us



DAMNIT Im never gonna stop buying stuff for this car!
__________________
2SS LS3 M6 - MGW - Dynatech LT's HF Cats - Magnaflow Street CB - ADM Race CAI - Pedders Xa Coilovers - Pfadt Sways
Jeanius is offline   Reply With Quote
Old 04-01-2010, 02:52 PM   #3
Speagle
 
Speagle's Avatar
 
Drives: 2010 IOM 2SS/RS
Join Date: Jan 2010
Location: jeffersonville, IN
Posts: 154
I plan to pick these up at the fest
Speagle is offline   Reply With Quote
Old 04-01-2010, 04:43 PM   #4
PfadtRacing
 
PfadtRacing's Avatar
 
Drives: 2010 Camaro, 2006 Z06
Join Date: Feb 2009
Location: SLC, UT
Posts: 3,375
Thanks guys! Always a pleasure to show people the difference!
PfadtRacing is offline   Reply With Quote
Old 04-01-2010, 04:55 PM   #5
SSOOCH
Camaro SL,UTs
 
SSOOCH's Avatar
 
Drives: 2010 Camaro SS/RS #16429
Join Date: Sep 2006
Location: South Jordan, UT
Posts: 7,431
Bitchin'!
__________________
SSOOCH is offline   Reply With Quote
Old 04-02-2010, 03:49 PM   #6
PfadtRacing
 
PfadtRacing's Avatar
 
Drives: 2010 Camaro, 2006 Z06
Join Date: Feb 2009
Location: SLC, UT
Posts: 3,375
Thanks! We have more videos on the way!
PfadtRacing is offline   Reply With Quote
Old 04-02-2010, 04:05 PM   #7
GTAHVIT
One Lucky Guy.
 
GTAHVIT's Avatar
 
Drives: #22 Tom Henry Racing 2010 2SS/RS
Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,770
Hey, can these be installed by a do it yourselfer, or do they need a press?

GTAHVIT is offline   Reply With Quote
Old 04-02-2010, 04:16 PM   #8
Don O
Camaro and Vettehead
 
Don O's Avatar
 
Drives: 2SS/RS IOM L99 69 427/400 Vette
Join Date: Aug 2009
Location: 12 miles East of Disneyland - Anaheim Hills
Posts: 547
Just ordered a set since I have my 3:73 gears sitting on the work bench ready to be installed. Timely purchase

Don O
__________________
Nothing sucks more than that moment during an argument when you realize you're wrong.

Don O is offline   Reply With Quote
Old 04-02-2010, 04:37 PM   #9
FrankT
400HP used to be enough..
 
FrankT's Avatar
 
Drives: 2010 2SS rs manual
Join Date: Aug 2009
Location: Central NC
Posts: 678
I just installed these. I bought and used the tool that Cincy Speed sells. Let me tell you that was money well spent!! It made changing them a piece of cake!! You can read about it on my build thread here: http://www.camaro5.com/forums/showthread.php?t=47925
Like everything else I have got from Pfadt, these were top quality and fit perfectly.
__________________
Currently in the fleet... 2010 ZR1 Corvette, 2014 Cadillac CTS-V, 2010 Camaro SS single turbo, 2014 GMC Sierra SLT crew cab, 1967 Camaro SS350, 1969 Camaro SS427.

Build thread: http://www.camaro5.com/forums/showthread.php?t=47925
FrankT is offline   Reply With Quote
Old 04-02-2010, 06:34 PM   #10
PfadtRacing
 
PfadtRacing's Avatar
 
Drives: 2010 Camaro, 2006 Z06
Join Date: Feb 2009
Location: SLC, UT
Posts: 3,375
Quote:
Originally Posted by GTAHVIT View Post
Hey, can these be installed by a do it yourselfer, or do they need a press?

Yes, these can be installed with a light rubber mallet, small hits. No press necessary. As FrankT stated, there is also a tool that Cincy Speed sells that aids installation. With, or without, these can be done in a garage with some basic tool with moderate level of difficulty. Hope that helps!
PfadtRacing is offline   Reply With Quote
Old 04-02-2010, 06:35 PM   #11
PfadtRacing
 
PfadtRacing's Avatar
 
Drives: 2010 Camaro, 2006 Z06
Join Date: Feb 2009
Location: SLC, UT
Posts: 3,375
Quote:
Originally Posted by Don O View Post
Just ordered a set since I have my 3:73 gears sitting on the work bench ready to be installed. Timely purchase

Don O
Thank you for your business! Please let us know how your project turns out!
PfadtRacing is offline   Reply With Quote
Old 04-02-2010, 06:36 PM   #12
PfadtRacing
 
PfadtRacing's Avatar
 
Drives: 2010 Camaro, 2006 Z06
Join Date: Feb 2009
Location: SLC, UT
Posts: 3,375
Quote:
Originally Posted by FrankT View Post
I just installed these. I bought and used the tool that Cincy Speed sells. Let me tell you that was money well spent!! It made changing them a piece of cake!! You can read about it on my build thread here: http://www.camaro5.com/forums/showthread.php?t=47925
Like everything else I have got from Pfadt, these were top quality and fit perfectly.
And as always, thank you for the compliments. We really value your feedback!
PfadtRacing is offline   Reply With Quote
Old 04-15-2010, 02:31 PM   #13
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crapramento, Crapifornia
Posts: 13,040
NICE! I always look forward to SEEing the difference. Keep 'em coming! Nice job BTW
__________________
"...What IS true: We anticipated that this would happen - we are never finished - and yes, Ford DOES deserve to win now and then. To think that GM can come out with a car to make ford throw in the towel is simply foolhardy..." - fbodfather
radz28 is offline   Reply With Quote
Old 04-15-2010, 04:34 PM   #14
ChevyThunder
 
Drives: pinto
Join Date: Jun 2009
Location: saturn
Posts: 186
I don't have the Pafdt pieces in my car but I did do this upgrade and it makes a huge difference.
ChevyThunder is offline   Reply With Quote
Old 04-15-2010, 04:43 PM   #15
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crapramento, Crapifornia
Posts: 13,040
So you used another company then? I'm pretty much sold on these babies; lighter than SFCs and probably just as good if the chassis is as stiff as it said.
__________________
"...What IS true: We anticipated that this would happen - we are never finished - and yes, Ford DOES deserve to win now and then. To think that GM can come out with a car to make ford throw in the towel is simply foolhardy..." - fbodfather
radz28 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.