Blade Spoiler? - Page 2 - Camaro Forum - 2011 Camaro 2010 Camaro / Camaro Z28 SS Forums

JohnnyCamaro · 10-07-2008, 11:20 AM

This is JohnnyCamaro AKA John Cox from GM Accessories. I want to clear up some confusion. The Blade spoiler is similiar to many 2nd gen spoilers and is a three piece spoiler. The Blade spoiler is an accessory that will be available sometime after launch as a future accessory. The blade spoiler will work with vehicles that have a lip spoiler from the factory, as it uses the same mounting points.
As for the High Wing Spoiler, it is available as an LPO at launch with an RPO code. The Spoiler will not work with vehicles that have a lip spoiler from the factory as the mounting points are different. Therefore if one would want this spoiler with a vehicle that already has the lip spoiler, they would have to buy a new decklid and then have the Wing Spoiler installed on the new decklid.

I hope all this info helps and good luck ordering....

rolnslo · 10-07-2008, 12:14 PM

JohnnyCamaro....

Any plans to release a spoiler like the ones on the 'vert concept and Bumblebee? The one on the SS seems to be shorter in height.

nUcLeArEnVoY · 10-07-2008, 01:07 PM

Quote:

Originally Posted by JohnnyCamaro

This is JohnnyCamaro AKA John Cox from GM Accessories. I want to clear up some confusion. The Blade spoiler is similiar to many 2nd gen spoilers and is a three piece spoiler. The Blade spoiler is an accessory that will be available sometime after launch as a future accessory. The blade spoiler will work with vehicles that have a lip spoiler from the factory, as it uses the same mounting points.
As for the High Wing Spoiler, it is available as an LPO at launch with an RPO code. The Spoiler will not work with vehicles that have a lip spoiler from the factory as the mounting points are different. Therefore if one would want this spoiler with a vehicle that already has the lip spoiler, they would have to buy a new decklid and then have the Wing Spoiler installed on the new decklid.

I hope all this info helps and good luck ordering....

Hmm, a 2nd-genish spoiler on a first gen inspired vehicle. It's a look that might have potential, I'd have to see it first. Since you're with GM Accessories, mind spoiling (no pun intended) the boys here at Camaro5 by perhaps... showing some pictures of said Blade Spoiler?

... and if you ask me, the one on the Bumblebee and SS look exactly the same. The angle makes the one on Bumblebee look bigger.

rolnslo · 10-07-2008, 02:28 PM

Here's a better angle on Bumblebee...

GameOver620 · 10-07-2008, 03:05 PM

this might have been answered already but the bumblebee spoiler is a blade spoiler?

rolnslo · 10-07-2008, 03:12 PM

Quote:

Originally Posted by GameOver620

this might have been answered already but the bumblebee spoiler is a blade spoiler?

I don't think it's the same. Here's a shot of the 2nd Gen spoiler that John refers to...

ChrisB · 10-08-2008, 07:43 PM

Quote:

Originally Posted by JohnnyCamaro

This is JohnnyCamaro AKA John Cox from GM Accessories. I want to clear up some confusion. The Blade spoiler is similiar to many 2nd gen spoilers and is a three piece spoiler. The Blade spoiler is an accessory that will be available sometime after launch as a future accessory. The blade spoiler will work with vehicles that have a lip spoiler from the factory, as it uses the same mounting points.
As for the High Wing Spoiler, it is available as an LPO at launch with an RPO code. The Spoiler will not work with vehicles that have a lip spoiler from the factory as the mounting points are different. Therefore if one would want this spoiler with a vehicle that already has the lip spoiler, they would have to buy a new decklid and then have the Wing Spoiler installed on the new decklid.

I hope all this info helps and good luck ordering....

Im not sure im getting all this does this mean if i order a 2 LT with RS package i cant have the high wing spoiler, what if i order 2LT without the RS?

headpunter · 10-08-2008, 08:04 PM

Quote:

Originally Posted by ChrisB

Im not sure im getting all this does this mean if i order a 2 LT with RS package i cant have the high wing spoiler, what if i order 2LT without the RS?

that is not what that is referring to you can get the high wing spoiler with any of the packages you will just use different holes to have it installed, so you may need a new truck lid

ChrisB · 10-08-2008, 08:48 PM

Quote:

Originally Posted by headpunter

that is not what that is referring to you can get the high wing spoiler with any of the packages you will just use different holes to have it installed, so you may need a new truck lid

This is exactly what this is referring to. I dont want any extra holes and i dont want to have to buy any other parts. I just want the High Wing Spoiler so what packages do i have to get to make it happen.

SO far i have to say the accesories really suck. You need to buy other parts to get the wing...you can get yellow interior trim kit but still have to keep the blue lights underneath making it green looking while the speedometre will still have the blue lights. It will end up looking like a xmas tree

playhard67 · 10-08-2008, 08:52 PM

i think if you order it upfront with the high wing spoiler they will put the correct holes in it. but if you want to add the high wing spoiler at a later date after the standard spoiler was installed...that's when you will have to get a new deck lid or deal with the extra holes.

Skyman 08 · 10-08-2008, 08:58 PM

to me the blade spoiler looks more like the spoiler you could get on the Last Monte Carlo, the nascar inspired one, not the ironing board one...

Mayhem · 05-14-2009, 06:45 PM

In that pic, the "Wing Spoiler" looks a bit different from what I've seen listed as "High Wing Spoiler" are they both available? or is the high wing (like on the build your own website) the only one being released as a wing spoiler?

Oops. I mean't the pic at the bottom of the 1st page. which show's both the blade & wing spoilers in that accessories poster.

10-08-2008, 08:52 PM	#35
playhard67 come to poppa Drives: 67RS,09 Harley FLHX Join Date: Jun 2008 Location: Maryland Posts: 1,863	i think if you order it upfront with the high wing spoiler they will put the correct holes in it. but if you want to add the high wing spoiler at a later date after the standard spoiler was installed...that's when you will have to get a new deck lid or deal with the extra holes. __________________ Cancelled the 2010 SS/RS (for now) and bought this instead (2009 Harley FLHX)

10-08-2008, 08:58 PM	#36
Skyman 08 I don't need no V8 Drives: 07 HHR, 10 CAMARO 1LT! Join Date: Dec 2007 Location: Tennessee Posts: 5,547	to me the blade spoiler looks more like the spoiler you could get on the Last Monte Carlo, the nascar inspired one, not the ironing board one... __________________ QUOTE=fbodfather: "Yes -- the 2010 (3.6 V6) engine is the same as the 2011 - we simply 'certified' the engine ......." http://www.vsra-usa.com/VSRA_Home_RQ4A.php Last edited by Skyman 08; 12-31-2009 at 12:05 PM.

05-14-2009, 06:45 PM	#37
Mayhem Drives: 2010 2SS RS M6 Camaro (Black) Join Date: May 2009 Location: Vancouver, BC (Canada) Posts: 547	In that pic, the "Wing Spoiler" looks a bit different from what I've seen listed as "High Wing Spoiler" are they both available? or is the high wing (like on the build your own website) the only one being released as a wing spoiler? Oops. I mean't the pic at the bottom of the 1st page. which show's both the blade & wing spoilers in that accessories poster. Last edited by Mayhem; 05-14-2009 at 06:46 PM. Reason: reply posted on wrong page#

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front spoiler	Kahlis	Cosmetics and Lighting Modification Discussions	24	09-06-2009 09:05 PM
As of now...	Eisenhower	Camaro Photos \| Spyshots \| Video \| Media Gallery	23	09-25-2008 02:37 AM
IRONMAN (possible spoiler info)	swazworth	Off-topic Discussions	30	05-11-2008 01:31 AM
Rear lip spoiler on concept camaro?	MY68RS	5th Gen Camaro SS LS LT General Discussions	20	04-10-2008 10:28 AM
Baileyspeed Blade?	Silverado	General Automotive + Other Cars Discussion	11	11-28-2007 12:58 PM

10-07-2008, 11:20 AM	#26
JohnnyCamaro Drives: 98 Camaro Join Date: Sep 2008 Location: Grand Blanc MI Posts: 33	This is JohnnyCamaro AKA John Cox from GM Accessories. I want to clear up some confusion. The Blade spoiler is similiar to many 2nd gen spoilers and is a three piece spoiler. The Blade spoiler is an accessory that will be available sometime after launch as a future accessory. The blade spoiler will work with vehicles that have a lip spoiler from the factory, as it uses the same mounting points. As for the High Wing Spoiler, it is available as an LPO at launch with an RPO code. The Spoiler will not work with vehicles that have a lip spoiler from the factory as the mounting points are different. Therefore if one would want this spoiler with a vehicle that already has the lip spoiler, they would have to buy a new decklid and then have the Wing Spoiler installed on the new decklid. I hope all this info helps and good luck ordering....

10-07-2008, 12:14 PM	#27
rolnslo 18k miles and counting... Drives: 2010 1LT/RS M6 Join Date: Mar 2008 Location: Houston, TX Posts: 2,715 View My Garage	JohnnyCamaro.... Any plans to release a spoiler like the ones on the 'vert concept and Bumblebee? The one on the SS seems to be shorter in height.

10-07-2008, 02:28 PM	#29
rolnslo 18k miles and counting... Drives: 2010 1LT/RS M6 Join Date: Mar 2008 Location: Houston, TX Posts: 2,715 View My Garage	Here's a better angle on Bumblebee...

10-07-2008, 03:05 PM	#30
GameOver620 Drives: 2003 Mitsubishi Lancer Join Date: Feb 2008 Location: Rockland County, NY Posts: 167	this might have been answered already but the bumblebee spoiler is a blade spoiler?