Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Sponsors Classifieds Marketplace > V8 Bolt-Ons & Tunes

V8 Bolt-Ons & Tunes Intake, exhaust, tunes, other bolt-ons.

View our official forum sponsors list.

Reply
 
Thread Tools
Old 05-09-2010, 06:40 PM   #1
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
SCT Custom Tune and What you need to get one

When you Purchase and SCT X3 Hand Held Tuner from me you get a Tune For Free for your Mods, exclusions apply.

Your new SCT X3 will come to you Blank, You will need to connect to your car and Upload Stock tune file.

Then After you install and OPEN SCT Device updater software, you can connect your X3 to your computer, Drivers should install automatically, then Get Stock File, Click Browse, Find your Desktop and Click Save.

Email Tuning SCT FAQ. http://www.sctflash.com/support/inde...eid=25&nav=0,3

Go to your Desktop, find Your VinNumber.sul and email it to me along with your Full name Address phone numbers, And all vehicle information and modifications.

I have developed Dyno Proven tunes for all of the Product I sell so Unless I instruct you to do so Datalogging will NOT be necessary.

If I Instruct you to Datalog your car, you can read this article to help understand what I will need.

SCT Datalogging FAQ http://www.sctflash.com/support/inde...eid=38&nav=0,3
You will need to set up your datalogging, I want you to select the following

RPM
ECT
TPS
IAT
MAF
Timing
Knock Retard
Short term fuel trim bank 1
Short term fuel trim bank 2
Long term fuel trim bank 1
Long term fuel trim bank 2

Go find a open road somewhere, 1/2 mile or so long would be great, from a stop drive the car 1/4 throttle up through the gears normally shifting at about 4500 RPM.

Then repeat at about 1/2 throttle to 5500 RPM

Then Repeat at Full Throttle 6000 RPM, a 1/4 mile is sufficient.

Using the LiveLink software

Extract and save the Datalog to your desktop.

Email me the 2 files along with a list of Mods, your name and address, Car you have, and a phone number where you can be reached easily.

Ted.

If you have other questions about SCT this is the entire FAQ section http://www.sctflash.com/support/inde...goryid=3&nav=0
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts

Last edited by JANNETTYRACING; 06-22-2010 at 12:29 PM.
JANNETTYRACING is offline   Reply With Quote
Old 06-05-2010, 11:05 AM   #2
Silver Ice Man
 
Silver Ice Man's Avatar
 
Drives: 2014 2SS/RS Spring limited edition
Join Date: Jul 2009
Location: Sylvan Lake, Ab
Posts: 474
Ordered mine, with a set of your Dynatech LT headers should be getting shipped on Tuesday I believe (just waiting for the ceramic coating), according to Kris. Man alive I can't wait to see how the car responds to your tune.
__________________
2014 2SS/RS, Spring Limited Edition...
Ask yourself.....when you turn on your car..... Does it return the favor.....lol
MODS: CIA cold air intake, Oil catch can, Dynatech Cat back exhaust, more to follow....
Silver Ice Man is offline   Reply With Quote
Old 06-05-2010, 11:16 AM   #3
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Your gonna love it especially with the headers.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-02-2010, 02:17 PM   #4
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Bump for guys looking for this Thread.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-02-2010, 02:26 PM   #5
oachalon

 
Drives: 2010 Camaro 1SS
Join Date: Mar 2009
Location: Mentor, Ohio
Posts: 889
Ted,

I have an edelbrock supercharger that i still have to install. I believe it came with an sct tuner. Would i be able to get a custom tune from you using this tuner? Also since i wouldnt be buying the tuner from you what do you charge for the tune?

Thanks,
oachalon is offline   Reply With Quote
Old 07-02-2010, 02:29 PM   #6
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by oachalon View Post
Ted,

I have an edelbrock supercharger that i still have to install. I believe it came with an sct tuner. Would i be able to get a custom tune from you using this tuner? Also since i wouldnt be buying the tuner from you what do you charge for the tune?

Thanks,
The Edelbrock Superchargers are just now rolling in the door, I have one in the box and one in a Build that won't be done for a few Weeks, I expect.

Once we Install and Tune one We will have custom Tunes for Sale for the Edelbrock, Until then Sit Tight, it will be worth the wait.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-03-2010, 09:20 AM   #7
armysig
Catch me if you can
 
armysig's Avatar
 
Drives: 2012 IOM ZL-1
Join Date: Nov 2009
Location: Texas
Posts: 2,469
That sir is what I have been waiting for. You attention to detail is going to provide some of the best tunes for a product I am waiting to install.

I can't wait to see some of your numbers once this is done. Until then I'm going to and wait for your results.
__________________
armysig is offline   Reply With Quote
Old 07-03-2010, 09:31 AM   #8
markmass
TRI-COUNTY CAMAROS
 
markmass's Avatar
 
Drives: 2SS/RS Oct 2009
Join Date: Oct 2009
Location: Coral Springs Florida
Posts: 455
Same for L99??

Ted -- I just received mine yesterday (Thanks Chris for quick shipping)

The data logging part -- Would that be the same for the L99? just looking at instructions the auto wont get to 4500 with 1/4 throttle without using the paddle shifters.

I have an R2C performance CAI, Kooks 1 7/8 headers on MACH XL Catbacks. The CEL light has just come on so will turn that off today...
Also wlll use this to turn off AFM....

Cheers
__________________
GET-TORQ custom CAM 223/243 LSA113, Full LS3 conversion, 3200 stall Multi-Disk TC from Circle-D, B&M Supercooler to cool that tranny down....1 7/8" Kooks Headers and High flowCats. MACH XL Catbacks. Eibach springs, R2C Performance CAI, powdercoated calipers, Footwell lighting in tune with dome lights, tints, ABL Lighting, ACS T3 ports and ACS Eagle T3 triple LED lighting kit. Heritage grill, Hex vents, ZL1 rockers, ZL1 Diffuser, Quad tips...the list keeps getting longer - whats next??


markmass is offline   Reply With Quote
Old 07-03-2010, 08:12 PM   #9
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by markmass View Post
Ted -- I just received mine yesterday (Thanks Chris for quick shipping)

The data logging part -- Would that be the same for the L99? just looking at instructions the auto wont get to 4500 with 1/4 throttle without using the paddle shifters.

I have an R2C performance CAI, Kooks 1 7/8 headers on MACH XL Catbacks. The CEL light has just come on so will turn that off today...
Also wlll use this to turn off AFM....

Cheers
Yes, Use the Paddle shifter.

I turn off AFM in all My Tunes Unless otherwise requested.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-04-2010, 01:43 AM   #10
kismyss
 
Drives: CGM 2SS Roto-Fab CAI, Mach XL CAT
Join Date: Oct 2009
Location: Cypress TX
Posts: 252
pm me a price please
kismyss is offline   Reply With Quote
Old 07-04-2010, 08:09 AM   #11
se7en

 
Drives: 87 Pinto on 32's
Join Date: Oct 2009
Location: Southern Illinois
Posts: 1,677
Ted, your everywhere man! lol
Is there anything you wont or cant do to a camaro? You the man!!
se7en is offline   Reply With Quote
Old 07-05-2010, 04:39 PM   #12
markmass
TRI-COUNTY CAMAROS
 
markmass's Avatar
 
Drives: 2SS/RS Oct 2009
Join Date: Oct 2009
Location: Coral Springs Florida
Posts: 455
Ted works weekends!!

Thanks for the program Ted!! Really wasn't expecting it until after the holidays!!! but - thanks!

Took it for a little 'spin' but wet outside -....So wait til its dry and see if i can light up the tires....Might be me, (and im okay with that) - but throttle response seems to bit more aggressive...

AFM - GONE!!!! im in Heaven!!

Anyone thinking about an SCTX3....its pretty cool. The livelink software is great, you can monitor just about anything. With the bonus of Ted supplying a tune...

Cheers Ted!
__________________
GET-TORQ custom CAM 223/243 LSA113, Full LS3 conversion, 3200 stall Multi-Disk TC from Circle-D, B&M Supercooler to cool that tranny down....1 7/8" Kooks Headers and High flowCats. MACH XL Catbacks. Eibach springs, R2C Performance CAI, powdercoated calipers, Footwell lighting in tune with dome lights, tints, ABL Lighting, ACS T3 ports and ACS Eagle T3 triple LED lighting kit. Heritage grill, Hex vents, ZL1 rockers, ZL1 Diffuser, Quad tips...the list keeps getting longer - whats next??


markmass is offline   Reply With Quote
Old 07-05-2010, 05:22 PM   #13
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 123,973
JRE Street package and tuned at Jannetty Racing on mine
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 07-06-2010, 07:56 AM   #14
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by bws_82 View Post
Ted, your everywhere man! lol
Is there anything you wont or cant do to a camaro? You the man!!
Can But Won't do Paint
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-06-2010, 07:57 AM   #15
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by markmass View Post
Thanks for the program Ted!! Really wasn't expecting it until after the holidays!!! but - thanks!

Took it for a little 'spin' but wet outside -....So wait til its dry and see if i can light up the tires....Might be me, (and im okay with that) - but throttle response seems to bit more aggressive...

AFM - GONE!!!! im in Heaven!!

Anyone thinking about an SCTX3....its pretty cool. The livelink software is great, you can monitor just about anything. With the bonus of Ted supplying a tune...

Cheers Ted!
Your Welcome Mark, Enjoy!

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-06-2010, 05:15 PM   #16
ssmike
Missing Big Red
 
ssmike's Avatar
 
Drives: 2013 Equinox CRT
Join Date: Jul 2009
Location: Buffalo, NY
Posts: 6,282
Ted, I have an LS3 so the SCT is probably overkill as I don't need the trans tuned. I am entertaining getting a JRE/Predator tune and my mods are listed in my sig (please don't blast me about the shorties). 3 questions: 1) Will the Predator suffice for my setup?, 2) do you have a tune for my mods or will I need to datalog? 3) Can you disable the decel popping and if so will it affect gas mileage? Thanks!
ssmike is offline   Reply With Quote
Old 07-06-2010, 05:18 PM   #17
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by ssmike View Post
Ted, I have an LS3 so the SCT is probably overkill as I don't need the trans tuned. I am entertaining getting a JRE/Predator tune and my mods are listed in my sig (please don't blast me about the shorties). 3 questions: 1) Will the Predator suffice for my setup?, 2) do you have a tune for my mods or will I need to datalog? 3) Can you disable the decel popping and if so will it affect gas mileage? Thanks!
Yes it will, Yes I do, Yes I can, Slightly.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-06-2010, 05:20 PM   #18
ssmike
Missing Big Red
 
ssmike's Avatar
 
Drives: 2013 Equinox CRT
Join Date: Jul 2009
Location: Buffalo, NY
Posts: 6,282
Wow! Now that's a quick reply! Please pm me a price. Thanks!
ssmike is offline   Reply With Quote
Old 07-06-2010, 09:52 PM   #19
Bear2SS
 
Bear2SS's Avatar
 
Drives: Black 2SS LS3
Join Date: Sep 2009
Location: Charlotte, NC
Posts: 151
Ted,

I like the idea of minimizing/eliminating the decel popping on my setup too. Is that something you can send me in another tune file for my setup?

Also, do you know if the sct tuner that came with the maggie can do datalogging? I can't seem to get it to work without hooking up my laptop to the tuner, with livelink active in the car.

Thanks!
Bear2SS is offline   Reply With Quote
Old 07-07-2010, 09:00 AM   #20
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by Bear2SS View Post
Ted,

I like the idea of minimizing/eliminating the decel popping on my setup too. Is that something you can send me in another tune file for my setup?

Also, do you know if the sct tuner that came with the maggie can do datalogging? I can't seem to get it to work without hooking up my laptop to the tuner, with livelink active in the car.

Thanks!
To All,

Always Send Tune Requests Via Email, tedj@jannettyracing.com and INCLUDE Full Name Address Phone Numbers, Vehicle Information, Mod List.

The Tuner will do Data Logging but works best when connected to a Laptop.

You must set it up first, Open Livelink software, Connect to your laptop, go to configure Data Log Items for Strategy, Type in Vin Number, Select PIDs, Save Live Link Configuration, Add data Log Set up file to X3.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-24-2010, 09:35 AM   #21
PWRtrip
5150
 
PWRtrip's Avatar
 
Drives: 2010 Camaro 1SS/RS A6
Join Date: Feb 2009
Location: Overland Park KS.
Posts: 100
just ordered mine this (am)
PWRtrip is offline   Reply With Quote
Old 07-24-2010, 10:26 AM   #22
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by PWRtrip View Post
just ordered mine this (am)
Thank you for the Order.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-30-2010, 12:42 PM   #23
PWRtrip
5150
 
PWRtrip's Avatar
 
Drives: 2010 Camaro 1SS/RS A6
Join Date: Feb 2009
Location: Overland Park KS.
Posts: 100
Quote:
Originally Posted by JANNETTYRACING View Post
Thank you for the Order.

Ted.
Thanks Ted
Got your e-mail w/tune this (am) and installed in parking garage at work.
Have not got to test it out yet,but the whole procedure from ordering the SCT to installing the tune was a breeze.

larry
PWRtrip is offline   Reply With Quote
Old 07-30-2010, 02:54 PM   #24
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 9,855
Quote:
Originally Posted by PWRtrip View Post
Thanks Ted
Got your e-mail w/tune this (am) and installed in parking garage at work.
Have not got to test it out yet,but the whole procedure from ordering the SCT to installing the tune was a breeze.

larry
Awesome, Thanks Again, Enjoy.

Ted.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
Old 07-30-2010, 10:01 PM   #25
ITGuy11
Burning up tires
 
ITGuy11's Avatar
 
Drives: 2010 Camaro 1SS/RS
Join Date: Jul 2010
Location: Macomb Twp, MI
Posts: 718
Ordered my SCT from Ted on Tuesday. Received the unit on Thursday, and the custom tune file Friday morning. Awesome service.

The only thing that sucks is that I am out of town and can't install the tune until Monday
__________________
Blower, cam, supporting mods 644RWHP 615RWTQ
My Build Thread COTW 11/19/12
Detroit 5th Gen Camaro Club
ITGuy11 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.