Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Gen5DIY
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons

Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons Bolt-Ons | Intakes | Exhaust

Reply
 
Thread Tools
Old 05-14-2010, 05:01 PM   #1
Jekyll-N-Hyde
I put the FU back in FUN
 
Jekyll-N-Hyde's Avatar
 
Drives: 1969 SS 396 , 2010 Camaro SS
Join Date: Jun 2009
Location: Between Weatherford and Azle TX hway730
Posts: 2,139
Thanks ADM for my Mods and Dyno of my 2010 L99 SS Camaro

I went to ADM today and had my American Racing Headers 1 7/8 installed along with my Xpipe and Borla Stingers.
I also went with one of there Cold Air Race intakes and had the car tuned.

The install took about 3 hours

The Car is only at 3K miles and everyday I get in her she has been stronger and stronger and stronger. I'm hoping with just these mods she will get even stronger as she ages.


Before everything

she dynoed 327hp ( STOCK )

After mods and Tune she dynoed

( first Pull ) 359.33hp and 382.20lbs of Torque

After it cooled down a few and another tweak from Andy

( 2nd Pull ) 363.43 hp and 383.35 lbs of torque


I'm still grinning at the 383.35


After visiting ADM I will for sure be back

ANDY is awsome the guy knows his stuff and is a mastermind at what he does.
Pat is awsome as well both make a great Team and that alone will bring me back.

Two things about Andy and Pat ( VERY PICKY WITH THE LITTLE STUFF ) Very Orangized Men who happen to take detail VERY SERIOUS

I recommend them both for work on your car.

Thanks Andy and the Same goes to you Pat for the work did on my baby.

Rick it was good meeting you Thank you for the Help that you did with my intake.

Adam and Josh it was great meeting yall

ADAM Number_9s car is just as beautiful in person as it is on here ( Thanks for all the help you have ever given on here ).

Josh aka Bigtex686 your Car is hella fun and only makes me wanna get that L99 conversion into a LS3 so bad now Thanks for the ride.


everyone go check out Andy and ADM they are Top Notch

Thanks guys see you in the future for sure.

IF the video doesnt work check back later as it is still processing.
The final numbers are in the video.


Jekyll-N-Hyde is offline   Reply With Quote
Old 05-14-2010, 05:09 PM   #2
ackeight

 
ackeight's Avatar
 
Drives: 10' 2SS/RS
Join Date: Jan 2010
Location: DFW
Posts: 1,316
I'm planning on something with them down the future. Just waiting on the car.....
ackeight is offline   Reply With Quote
Old 05-14-2010, 05:17 PM   #3
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 123,978
I'm getting my ADM CAI installed tommorow
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 05-14-2010, 05:24 PM   #4
duffmobile
 
duffmobile's Avatar
 
Drives: 2010 Camaro 2SS/RS - IOM/IOM
Join Date: Mar 2009
Location: Frankfort, IL
Posts: 376
Nice numbers! I hit 366 HP and 380 TQ on my L99 with similar mods. Were you on a mustang dyno or dynojet?
__________________
L99 with 2.8 LC Kenne Bell, Kooks 1 7/8 headers, Corsa Catback, R2C CAI, 491 RWHP / 500 RWTQ ---- 2010 MY #7539
duffmobile is offline   Reply With Quote
Old 05-14-2010, 05:24 PM   #5
mlee
H-Town Camaro Club
 
mlee's Avatar
 
Drives: Number Twenty-Three
Join Date: Oct 2008
Location: Conroe, TX
Posts: 23,978
Very Nice... I know you are going to really enjoy your car now...
__________________
.
mlee is offline   Reply With Quote
Old 05-14-2010, 05:32 PM   #6
Jekyll-N-Hyde
I put the FU back in FUN
 
Jekyll-N-Hyde's Avatar
 
Drives: 1969 SS 396 , 2010 Camaro SS
Join Date: Jun 2009
Location: Between Weatherford and Azle TX hway730
Posts: 2,139
Quote:
Originally Posted by duffmobile View Post
Nice numbers! I hit 366 HP and 380 TQ on my L99 with similar mods. Were you on a mustang dyno or dynojet?
DYNO JET from what ADMS dyno sheet said.
Jekyll-N-Hyde is offline   Reply With Quote
Old 05-14-2010, 06:14 PM   #7
LOUDMIKE
 
Drives: 2010 2ss, 1967 ss427, 1968 327
Join Date: Mar 2010
Location: Tempe, Arizona
Posts: 22
Those numbers are awesome. We just got done doing a L99 to LS3 conversion, cam, kooks headers and CAI and put down 410 to the tire. I wish I had your altitude, better gas and cooler temps here.
LOUDMIKE is offline   Reply With Quote
Old 05-14-2010, 06:18 PM   #8
Number_9

 
Number_9's Avatar
 
Drives: 2010 2SS/RS L99
Join Date: Mar 2009
Location: Trophy Club, TX
Posts: 1,455
Good meeting you today! Enjoy all the new found horsepower that comes with being in the ADM Army!

Quote:
Originally Posted by LOUDMIKE View Post
Those numbers are awesome. We just got done doing a L99 to LS3 conversion, cam, kooks headers and CAI and put down 410 to the tire. I wish I had your altitude, better gas and cooler temps here.
Andy's dyno is notoriously conservative too!
__________________


Number_9 is offline   Reply With Quote
Old 05-14-2010, 06:34 PM   #9
thesnoopster


 
thesnoopster's Avatar
 
Drives: '10 SIM SS/A6 - '12 SIM Equinox LT
Join Date: Jul 2009
Location: Northern Virginia
Posts: 3,621
Those are some nice numbers!!! Good Job!! ( I hope I can be the same way soon in my L99)
__________________
2010 SIM Camaro 1SS/A6

Mods: "93 Octane and a baby seat..." TunedByFrost/EFI Performance,LLC @ PAS "You gotta love me ... or leave me alone"
thesnoopster is offline   Reply With Quote
Old 05-14-2010, 06:39 PM   #10
Camaro21


 
Camaro21's Avatar
 
Drives: 2010 2SS/RS M6
Join Date: Jul 2009
Location: DFW, TX
Posts: 5,022
Congrats to another Happy Customer comes from the ADM Performance Shop !! See you guys at the 1st Annual BBQ tomorrow at the Back 9 Sports Grill..
__________________
Camaro21 is online now   Reply With Quote
Old 05-14-2010, 09:28 PM   #11
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,788
Quote:
Originally Posted by Jekyll-N-Hyde View Post
I went to ADM today and had my American Racing Headers 1 7/8 installed along with my Xpipe and Borla Stingers.
I also went with one of there Cold Air Race intakes and had the car tuned.

The install took about 3 hours

The Car is only at 3K miles and everyday I get in her she has been stronger and stronger and stronger. I'm hoping with just these mods she will get even stronger as she ages.


Before everything

she dynoed 327hp ( STOCK )

After mods and Tune she dynoed

( first Pull ) 359.33hp and 382.20lbs of Torque

After it cooled down a few and another tweak from Andy

( 2nd Pull ) 363.43 hp and 383.35 lbs of torque


I'm still grinning at the 383.35


After visiting ADM I will for sure be back

ANDY is awsome the guy knows his stuff and is a mastermind at what he does.
Pat is awsome as well both make a great Team and that alone will bring me back.

Two things about Andy and Pat ( VERY PICKY WITH THE LITTLE STUFF ) Very Orangized Men who happen to take detail VERY SERIOUS

I recommend them both for work on your car.

Thanks Andy and the Same goes to you Pat for the work did on my baby.

Rick it was good meeting you Thank you for the Help that you did with my intake.

Adam and Josh it was great meeting yall

ADAM Number_9s car is just as beautiful in person as it is on here ( Thanks for all the help you have ever given on here ).

Josh aka Bigtex686 your Car is hella fun and only makes me wanna get that L99 conversion into a LS3 so bad now Thanks for the ride.


everyone go check out Andy and ADM they are Top Notch

Thanks guys see you in the future for sure.

IF the video doesnt work check back later as it is still processing.
The final numbers are in the video.




Glad to finally put a face to a name...You guys held up well dealing with the crowd at the shop.

As far as being extremely careful and picky...that is the only way we will have it.Coming from Aerospace like yourself you know it just comes natural,I just wish we could control the weather


See you guys tommorow,Rain or shine!
ADM PERFORMANCE is offline   Reply With Quote
Old 05-14-2010, 10:09 PM   #12
Jekyll-N-Hyde
I put the FU back in FUN
 
Jekyll-N-Hyde's Avatar
 
Drives: 1969 SS 396 , 2010 Camaro SS
Join Date: Jun 2009
Location: Between Weatherford and Azle TX hway730
Posts: 2,139
Quote:
Originally Posted by ADM PERFORMANCE;
Glad to finally put a face to a name...You guys held up well dealing with the crowd at the shop.

As far as being extremely careful and picky...that is the only way we will have it.Coming from Aerospace like yourself you know it just comes natural,I just wish we could control the weather


See you guys tommorow,Rain or shine!
ah crowd wasn't anything we enjoied it lol thanks again I just tried it out on some dry pavement wow lol


Adm rocks
Jekyll-N-Hyde is offline   Reply With Quote
Old 05-14-2010, 11:33 PM   #13
bigtex686
 
Drives: 1SS Camaro
Join Date: Sep 2009
Location: Tx
Posts: 29
It was a pleasure meeting you and your wife today. Its too bad you guys cant make it tomorrow :(
bigtex686 is offline   Reply With Quote
Old 05-15-2010, 08:16 AM   #14
GMRULZ

 
GMRULZ's Avatar
 
Drives: 2010 SS & 2008 C6
Join Date: Mar 2008
Location: VA
Posts: 1,823
I have the same exact mods as you except for the stingers and put down 364rwhp and 382rwtq, and I had about 1500 miles at the time of my dynotune, funny thing is I had exactly 327rwhp on a dynojet stock as well... Talk about consistency... Now depending on raceweight, traction and DA you are in 12.2 territory..

You can`t go wrong w/ ADM, I love my custom painted ADM RAce, it has helped me move to near thetop ofthe bolt-on list and has helped me win trophy`s at car shows as well.
__________________
2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter.

Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s!

Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..
GMRULZ is offline   Reply With Quote
Old 05-15-2010, 12:15 PM   #15
Jekyll-N-Hyde
I put the FU back in FUN
 
Jekyll-N-Hyde's Avatar
 
Drives: 1969 SS 396 , 2010 Camaro SS
Join Date: Jun 2009
Location: Between Weatherford and Azle TX hway730
Posts: 2,139
Very interesting


Last edited by Jekyll-N-Hyde; 05-25-2010 at 07:50 PM.
Jekyll-N-Hyde is offline   Reply With Quote
Old 05-15-2010, 01:45 PM   #16
ackeight

 
ackeight's Avatar
 
Drives: 10' 2SS/RS
Join Date: Jan 2010
Location: DFW
Posts: 1,316
That's hard to see but it looks like you picked up a TON of hp/tq down low!
ackeight is offline   Reply With Quote
Old 05-15-2010, 05:19 PM   #17
RedJewel2SS
12.23s@113mph
 
RedJewel2SS's Avatar
 
Drives: 2SS/RS, A6, just a few bolt ons
Join Date: Jul 2009
Location: Houston, TX
Posts: 1,205
i just HAVE to have these guys install my other stuff down the road and work their magic on my car!
__________________

RIP Cammie 7/15/2009 - 4/1/2011
RedJewel2SS is offline   Reply With Quote
Old 05-16-2010, 07:44 AM   #18
ADM PERFORMANCE

 
Drives: 2013 ZL1 #138
Join Date: Oct 2008
Location: DfW - Texas
Posts: 3,788
Quote:
Originally Posted by RedJewel2SS View Post
i just HAVE to have these guys install my other stuff down the road and work their magic on my car!
In due time I am sure you will end up here.
ADM PERFORMANCE is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
V8 Camaro Performance Upgrades List Milk 1027 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 85 11-11-2013 12:48 PM
New 2010 Camaro 1/4 Mile Record - 11.549 @ 120.6 (now 11.29) rooster99ss Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 187 05-10-2013 02:50 PM
Hyp's 2010 Camaro mods X-treme Horsepower Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 91 03-01-2013 01:07 PM
My bolt on 2010 L99 camaro, tune and dyno by Aadil in Bahrain jo0oker Camaro Photos | Spyshots | Video | Media Gallery 6 12-18-2009 05:09 AM
2010 CAMARO AT ADM SHOP DYNO ADM PERFORMANCE Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 6 06-06-2009 05:20 AM


All times are GMT -5. The time now is 09:38 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.