Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Apex Paul
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals

Member Car Journals Want to keep a long term Camaro project journal to share with the community? Use this forum to create a single thread which you can update over time to document the progress.

Reply
 
Thread Tools
Old 05-26-2012, 10:29 AM   #1
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
1SS Ashen Gray Metallic Build Thread

I ordered my 2012 1SS in Ashen Gray Metallic sight unseen. The only existing images at the time I ordered this color were on the ZL1 Vert concept. I took a chance and it was more than worth it. I have finally done some work on her and felt it was time to start my own build thread. After watching "Better Off Dead" as a kid, I fell in love with Lane's 67 RS SS in tuxedo black. My father bought an '89 Z28 in the early 90s. It was a beast. I never forgot the feeling of being thrown back in the seat. I had some "fast" cars in high school and college; a '92 Cutlass Supreme SL (190K miles), a '95 Monte Carlo SS (150K miles), and a '00 Eclipse (90K miles). I did a lot of work on those cars, but they were tired. My original idea was to build a 69 Camaro SS. After doing all the research, I realized it would take me at least 2 years of solid work to even get a moving vehicle. After 3 deployments, I realized how much my time meant to me. A new car was in order. The bolt on aftermarket really appeals to me as most projects can be done in a day. That was all it took. A year later I ordered my very own 1SS. I said "No" to almost every option knowing that everything would change eventually. I wanted a blank canvas. The Camaro body with a big engine. That's what I got. I never even test drove an SS. The first time I fired up the engine at the dealer was every thing I imagined it would be. Love at first pedal mash. Here follows the evolution of a monster. I call her Mjolnir, after the enchanted hammer of Thor. It can only be wielded by its master, it never misses its mark, and it always kills with one blow.
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 10:32 AM   #2
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
Mjolnir coming off the trailer at the dealer
Attached Images
 
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 10:34 AM   #3
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
Picking her up after a 2 month wait. It was painful, but it was worth it.
Attached Images
     
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 10:36 AM   #4
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
After her first bath and wax.
Attached Images
  
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 10:43 AM   #5
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
Nothing says american muscle to me like a fat Hurst shifter ball. The leather wrapped knob wasn't cutting it for me. So I picked up a ball expecting it to be a 5 minute job. I found out that the stock short throw kit uses the same press fit stick as the base shifter. So I ponied up and threaded the shaft myself (with help from a friend). Cutting the first thread was the most nerve wracking thing I've ever done.
Attached Images
     
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 10:44 AM   #6
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
That transition piece came from sickspeed. It has a set screw so it won't move. It really completes the look.
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 10:47 AM   #7
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
I drive in flips flops a lot. I got sick of slipping off the OE pedals. I ordered these SRP pedals. They are the grid pattern (minus the trim ring) in anodized black. It was an easy install and makes a huge difference. I have even started working on heel toe shifting.
Attached Images
 
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 10:48 AM   #8
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
I added a whistler radar detector. It has already paid for itself many times. Pics will follow once I find a better way to route the hardwire cable.
__________________

Last edited by daxavier; 05-27-2012 at 07:36 AM.
daxavier is offline   Reply With Quote
Old 05-26-2012, 10:54 AM   #9
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
I undertook my biggest project to date. I was sick of almost getting run over by clowns only to beep my tiny euro horn in feeble anger. I wanted a train horn. In order to do that, I needed to open up some space. So, I ordered the Roto Fab washer relocation kit. While I was at it, I figured I should just cowboy up and add a CAI and Apex scoop. I used the scoop as a mounting base for my horn, which worked out great. I got suckered in to using a bolt from the original washer for the pump. It looked great and worked awesome, until I lowered the car and the tire practically smashed it. I ended up attaching the pump to the scoop as well. At first I was worried about stress on the metal. After install, it wasn't even phased by the weight. In fact, the Apex washer relocation kit puts the reservoir in the same place I put my pump. In the end everything worked out. I can now certainly be heard. I used an add-a-circuit on the horn button circuit. What's nice is that the train horn doesn't beep when I arm the alarm system. Nice for those late nights in my neighborhood.
Attached Images
     
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 10:56 AM   #10
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
Here's the CAI. I didn't take a photo after installing the washer reservoir. I'll take a pic later.
Attached Images
 
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 11:00 AM   #11
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
My next undertaking is a complete audio install. I have a laundry list of stuff, Infinity Kappa components and 6x9s, Alpine 10" type R, Alpine 5 channel amp, Dynamat, 2 farad cap, JVC nav head unit all new wires, backup cam etc. I ended up deciding on the Metra Kit. While not a perfect option, it has a better track record than the Scosche has so far. I'll post pics as the project progresses.
Attached Images
 
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 11:02 AM   #12
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
I have an Audio Integrations custom box on order for the sub, as well as the subthump 6x9 mounting plates for the rear deck.
__________________
daxavier is offline   Reply With Quote
Old 05-26-2012, 11:04 AM   #13
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
Almost forgot, I put the skip shift eliminator in at the same time as the hurst ball mod. Never took pics. It was a tight work space, sorry
__________________

Last edited by daxavier; 05-26-2012 at 06:07 PM.
daxavier is offline   Reply With Quote
Old 05-27-2012, 12:52 AM   #14
RenegadeSS
 
RenegadeSS's Avatar
 
Drives: Camaro LLT
Join Date: May 2012
Location: Union City, NJ
Posts: 481
Keep up the good work! Really love the color.
__________________
RenegadeSS is offline   Reply With Quote
Old 05-27-2012, 04:23 AM   #15
pierre777
HT5 COTW 9/3/2012
 
pierre777's Avatar
 
Drives: Cyber Bullet
Join Date: Jun 2011
Location: lebanon
Posts: 4,571
Send a message via Skype™ to pierre777
Looking good brotha!
__________________
pierre777 is offline   Reply With Quote
Old 05-28-2012, 06:30 PM   #16
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
Here's a couple shots of the washer reservoir installed.
Attached Images
  
__________________
daxavier is offline   Reply With Quote
Old 05-28-2012, 06:33 PM   #17
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
I did the Dynamat in the trunk area. I bought the trunk kit, 20 sqft. It wasn't enough to coat everything, but it was enough to get the job done. A very noticeable difference just shutting the trunk lid.
Attached Images
  
__________________
daxavier is offline   Reply With Quote
Old 06-05-2012, 02:11 AM   #18
Jeff_SS
Cam only
 
Jeff_SS's Avatar
 
Drives: 2013 AGM 2SS/RS M6
Join Date: Nov 2011
Location: SoCal
Posts: 1,041
Looks great so far man, keep it updated!
__________________
2013 AGM 2SS/RS M6. Hurst, NPP exhaust, nav | CMS Custom Grind Cam, Kooks 1 7/8" LT headers & high-flow cats, CAI intake | Pfadt 1.25" springs | Tuned by Ryne @ CMS 483rwhp 433rwtq (mustang dyno)
Jeff_SS is offline   Reply With Quote
Old 06-05-2012, 05:01 PM   #19
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
Got a chance to get some more work done on the stereo project. Got the passenger door done. It was pretty complicated fabbing up brackets and basically jamming my tweeter into the OE pod. Didn't take any pictures due to frustration. I am working on the driver door now and will post pics as they come. Probably the biggest time saver on this door will be bypassing the main grommet for running the wires into the car. There is a second small grommet beneath the main one. Unfortunately the wires aren't in the loom, but I can always go back and add my own little wire wrap to clean it up a bit. I also did Dynamat on both doors. There is a huge difference just in the sound of the door closing.
Attached Images
   
__________________
daxavier is offline   Reply With Quote
Old 06-05-2012, 05:06 PM   #20
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
I got some Scosche door speaker adapters, but they put too much of the speaker into the door cavity. I would have lost a lot of the sound, so I heavily modified the stock speaker pod to make it fit. Same with the tweeters. The tape holding it in there was just to center it while I mashed it in there. It is actually really solid. Cutting into the door molding is terrifying. I had to widen the spot to allow the excess to fit into the door. Once everything is done and I'm sure everything is working I will tighten things up with a little quick tight to finish off the mod.
Attached Images
    
__________________
daxavier is offline   Reply With Quote
Old 06-06-2012, 03:59 PM   #21
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
Finished the driver's door today. First I had to do the scariest part- cutting into the door trim. I used a serrated knife and a box cutter. There isn't a lot of material there and it is really soft. So I went in segments till the tweeter fit. Then I started snaking wires. The main connector has extra space after you remover the unneccesary orange lock. I make sure you don't cross your wires through the connector or it won't latch. Then I snaked it all through the extra grommet and threw a zip tie on there. As I said before, I can always go back and add my own wire hider to clean it up. Until I get everything hooked up and test it, I'll leave it as is.
Attached Images
       
__________________
daxavier is offline   Reply With Quote
Old 06-06-2012, 04:06 PM   #22
Ivan @ Southwest Speed

 
Ivan @ Southwest Speed's Avatar
 
Drives: '10 2SS/RS, '96 Z28
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 11,704
Looking great! Love the fact that you are getting after it so quickly!

Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
Old 06-06-2012, 07:17 PM   #23
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
I bought a whole bunch of projects at once, and am away from my time stealer (house projects). It's coming along pretty well. I'm going to have to wait a little while to get into the dash board but I have most of the prep work done so it shouldn't be too rough.
__________________
daxavier is offline   Reply With Quote
Old 06-06-2012, 07:19 PM   #24
daxavier
 
daxavier's Avatar
 
Drives: 2012 AGM 1SS
Join Date: Sep 2011
Location: TN
Posts: 88
here is a sound clip of my horn for anyone who's interested.
__________________
daxavier is offline   Reply With Quote
Old 06-08-2012, 09:39 AM   #25
pierre777
HT5 COTW 9/3/2012
 
pierre777's Avatar
 
Drives: Cyber Bullet
Join Date: Jun 2011
Location: lebanon
Posts: 4,571
Send a message via Skype™ to pierre777
sounds nasty and loud ,i could use one of those to make other racers move out of my way when i floor it.
__________________
pierre777 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.