Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
HeadlightArmor
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Cosmetics and Lighting Modification Discussions


Reply
 
Thread Tools
Old 10-04-2016, 11:53 AM   #1
Nighthawk89


 
Nighthawk89's Avatar
 
Drives: 2011 Camaro 2Ss M6
Join Date: Dec 2011
Location: Southern California
Posts: 3,395
ZL1 front bumper conversion and wheel wells help

#22831868 Fascia
#22895338 Right Bezel
#22895339 Left Bezel
#22894223 Lower Grill
#20952857 Support
#20952853 Absorber
#20957334 DRL Retainer (need 2)
#11610157 pkg of 10 Nuts
#11570637 pkg of 20 Bolts
#92231490 pkg of 10 rivets
#10335108 fog lights (need 2)

Can someone please confirm this is all i need to properly swap my 2011 front bumper? Also, are the zl1 fender wells a direct drop in and if so would you happen to know their part #?

Thanks for your help!!
__________________
PerformanceHeartbeat Supercharger -BTR Stage 3 PD Cam -BTR Supporting Mods -CHE Rocker Arms -Roto-Fab Cold Air -VMaxx TB -Elite E2 Catch Can -NGK Trix7's -ZL1 Fuel Pump/ADM FPCM -ID-850 Injectors - JDP Clutch Res Relocation -Kooks LT's/Cat-less -Corsa 3" ZL1 Black Tip Exhaust-
Suspension1.25'' Front & 1" Rear Drop- BMR (Sway's, Toe Links, Trailing Arms, Front End Links, Upper Control Arm Bushings, Outer Trailing Arm Bushings)-FMT Solid Subframe Bushings
Brake's/WheelsPowder-coated Calipers-Goodridge Lines-Slotted and Dimpled Rotors-Hawk HPS Pads-OEM ZL1 10 Spoke Wheels (285 Front/315 Rear)
Nighthawk89 is offline   Reply With Quote
Old 10-04-2016, 03:46 PM   #2
01pewterz28
Camaro Junkie
 
01pewterz28's Avatar
 
Drives: 2010 2LT/RS AKA ZLRS
Join Date: Aug 2008
Location: CENTRAL FLORIDA
Posts: 8,378
The ZL1 wheel liners are a direct bolt on you will need to the brake cooling ducts (you do not need them but might as well).

20952838 (Right)
20952837 (Left)

ZL1 bumper extension's (Left & Right)

22895340 (Right)
22895341 (Left)

ZL1 belly pan
23188146

You do not need it but it cleans up the underside and helps keep the engine compartment clean.

I made one out of aluminum and painted it black using hi-temp paint.
__________________
01pewterz28 is offline   Reply With Quote
Old 10-04-2016, 03:49 PM   #3
01pewterz28
Camaro Junkie
 
01pewterz28's Avatar
 
Drives: 2010 2LT/RS AKA ZLRS
Join Date: Aug 2008
Location: CENTRAL FLORIDA
Posts: 8,378
Here is a shot of the fender extensions and the custom made aluminum belly pan.
Attached Images
  
__________________
01pewterz28 is offline   Reply With Quote
Old 10-04-2016, 03:56 PM   #4
Nighthawk89


 
Nighthawk89's Avatar
 
Drives: 2011 Camaro 2Ss M6
Join Date: Dec 2011
Location: Southern California
Posts: 3,395
Quote:
Originally Posted by 01pewterz28 View Post
The ZL1 wheel liners are a direct bolt on you will need to the brake cooling ducts (you do not need them but might as well).

20952838 (Right)
20952837 (Left)

ZL1 bumper extension's (Left & Right)

22895340 (Right)
22895341 (Left)

ZL1 belly pan
23188146

You do not need it but it cleans up the underside and helps keep the engine compartment clean.

I made one out of aluminum and painted it black using hi-temp paint.

Awesome! Thats exactly what i was looking for! Thanks man.
__________________
PerformanceHeartbeat Supercharger -BTR Stage 3 PD Cam -BTR Supporting Mods -CHE Rocker Arms -Roto-Fab Cold Air -VMaxx TB -Elite E2 Catch Can -NGK Trix7's -ZL1 Fuel Pump/ADM FPCM -ID-850 Injectors - JDP Clutch Res Relocation -Kooks LT's/Cat-less -Corsa 3" ZL1 Black Tip Exhaust-
Suspension1.25'' Front & 1" Rear Drop- BMR (Sway's, Toe Links, Trailing Arms, Front End Links, Upper Control Arm Bushings, Outer Trailing Arm Bushings)-FMT Solid Subframe Bushings
Brake's/WheelsPowder-coated Calipers-Goodridge Lines-Slotted and Dimpled Rotors-Hawk HPS Pads-OEM ZL1 10 Spoke Wheels (285 Front/315 Rear)
Nighthawk89 is offline   Reply With Quote
Old 10-04-2016, 04:43 PM   #5
01pewterz28
Camaro Junkie
 
01pewterz28's Avatar
 
Drives: 2010 2LT/RS AKA ZLRS
Join Date: Aug 2008
Location: CENTRAL FLORIDA
Posts: 8,378
My completed project full exterior OEM ZL1 conversion (hood, insert, bumper front and rear, front grille, side skirts, rear diffuser, rear spoiler, wheel liners, ZL1 10-spokes, ZL1 front and rear lowering springs).
Attached Images
   
__________________
01pewterz28 is offline   Reply With Quote
Old 10-05-2016, 01:47 AM   #6
2SSRS@Gen5diy

 
2SSRS@Gen5diy's Avatar
 
Drives: 2010 2SS IOM ,2014 Z/28, 66 Nova
Join Date: Oct 2008
Location: By the lake in AZ
Posts: 13,973
Quote:
Originally Posted by 01pewterz28 View Post
My completed project full exterior OEM ZL1 conversion (hood, insert, bumper front and rear, front grille, side skirts, rear diffuser, rear spoiler, wheel liners, ZL1 10-spokes, ZL1 front and rear lowering springs).
Now your only showing off.
__________________
<img src=images/smilies/thumbdown.gif border=0 alt= title=Thumbdown class=inlineimg />
2SSRS@Gen5diy is offline   Reply With Quote
Old 10-06-2016, 10:03 AM   #7
01pewterz28
Camaro Junkie
 
01pewterz28's Avatar
 
Drives: 2010 2LT/RS AKA ZLRS
Join Date: Aug 2008
Location: CENTRAL FLORIDA
Posts: 8,378
Quote:
Originally Posted by 2SSRS@Gen5diy View Post
Now your only showing off.
who me
__________________
01pewterz28 is offline   Reply With Quote
Old 10-07-2016, 05:33 PM   #8
8balldeluxe
 
Drives: 2010 Camaro SS Victory Red
Join Date: Apr 2015
Location: Rosenberg, Texas
Posts: 653
Looks sweet, just do an LSA upgrade and call it a day
__________________
Speed Engineering Headers w/ Texas Speed HFC's ~ Flowmaster 2 1/2" cat back w/Flowmaster Super 10's ~ Cold Air Inductions Intake w/ Scoop and WW relocate ~ VMAX CNC Spiral PTB ~ Cross Drilled and Slotted Rotors w/Hawk pads ~ ZL1 Spoiler ~ SCTX4 RDP Tuned
8balldeluxe is offline   Reply With Quote
Old 10-08-2016, 10:19 PM   #9
01pewterz28
Camaro Junkie
 
01pewterz28's Avatar
 
Drives: 2010 2LT/RS AKA ZLRS
Join Date: Aug 2008
Location: CENTRAL FLORIDA
Posts: 8,378
Quote:
Originally Posted by 8balldeluxe View Post
Looks sweet, just do an LSA upgrade and call it a day
Thought has crossed my mind peoblem is I have had it out of the garage once this year and maybe one more time before the end of the year.

Hard to justify $15k for a car I drive 5 times or less a year.

Maybe I will just opt for a 17 ZL1.
__________________

Last edited by 01pewterz28; 10-10-2016 at 08:27 AM.
01pewterz28 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:00 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.